The Effect of Oxygen Mass Transfer on Aerobic Biocathode Performance, Biofilm Growth and Distribution in Microbial Fuel Cells

Abstract

AbstractMicrobial fuel cells (MFCs) are a sustainable technology for the direct conversion of biodegradable organics in wastewater into electricity. In most MFCs, the oxygen reduction reaction (ORR) is used as the cathode reduction reaction. Aerobic biocathodes, which use bacteria as biocatalysts to catalyze the cathode ORR, provide self‐sustained, robust and highly active alternatives to chemical catalysts. However, further study of the effect of oxygen mass transfer to the biofilm and cathode materials design is needed. In the current work, two aerobic biocathodes were enriched in half‐cells, and oxygen mass transfer to the biofilm and the biofilm distribution in the porous electrode structure were investigated. It was found that mass transfer of oxygen to the aerobic biocathode was a significant factor affecting cathode ORR, evidenced by a strong correlation between the air flow rate and current. Additionally, it was found that the biofilm penetrates between 20–30% into the porous carbon electrode structure, which is likely due to oxygen mass transfer limitations. The performance of a MFC with biocatalysts at both anode and cathode (64 µW cm⁻² peak power at an air flowrate of 1 L min⁻¹) showed strong correlation with air flowrate, confirming the observation in the half‐cell system.

Key findings

• ▸Additionally, it was found that the biofilm penetrates between 20–30% into the porous carbon electrode structure, which is likely due to oxygen mass transfer limitations.
• ▸The performance of a MFC with biocatalysts at both anode and cathode (64 µW cm⁻² peak power at an air flowrate of 1 L min⁻¹) showed strong correlation with air flowrate, confirming the observation in the half‐cell system.

Keywords

Identifiers

DOI

10.1002/fuce.201700172

Journal

Fuel Cells

Year

2018