Continuous Once-Through Electrooxidation Treatment using Mixed Metal Oxide Anode for Bacterial Disinfection
Poulomi Chandra, Anoop Verma, Aastha Palta, Vijay Luxami +1
AI summary
90% confidenceMES research in electrode, membrane. Abstract A novel electrooxidation (EO) unit was investigated for disinfect...
Generated by MESSAI extraction pipeline · review against source PDF
No 3D model is mapped to this paper yet. Parameter ranges above still place reported values on the literature distribution.
What they did
- Substrate
- synthetic mixture
What worked
No outcome metrics extracted yet.
Abstract
Abstract A novel electrooxidation (EO) unit was investigated for disinfecting wastewater, offering a promising alternative. This study continuously treated simulated bacterial wastewater using a mixed metal oxide (MMO) anode, mimicking hospital ward conditions. Optimal disinfection (96% bacterial inactivation) was achieved in continuous mode at a current density of 7.14 mA/cm 2 , 0.2 g/L NaCl, 9 minutes treatment time, and 40 mL/min flow rate. Real sewage wastewater achieved 92% inactivation at 8 minutes under these conditions. The MMO anode remained durable and effective after 300 cycles. EO presents a robust and affordable technology with an electrical consumption of 0.184 kWh/m 3 and an operational cost of $1.88/m 3 . These findings suggest this EO technique is a viable approach for decentralized wastewater treatment in hospital infectious wards, with the potential for real-world application.
Keywords
Identifiers
- Journal
- Research Square
- Year
- 2025