Substantially Improved Microbial Electrosynthesis of Methane Achieved by Improving Hydrogen Retention and Flow Distribution through Porous Electrodes.
AI summary
75% confidenceA new rectangular zero-gap cell design with an extended flow path improves hydrogen retention and conversion to biomethane in microbial electrosynthesis, achieving a peak Coulombic efficiency of 96%.
Generated by MESSAI extraction pipeline · review against source PDF
Literature priors
Representative microbial electrochemical system — matched on the paper’s system type only, not its reactor or geometry.
Reported parameters
The author’s reported value (▼) sits on top of the literature distribution from MESS-Parameters. Values outside the band are flagged as outliers.
6 extracted values
View extracted valuesOpen in lab for full controls, parameter editing, and template overlays.
Open in lab →What they did
- System
- MES
What worked
No outcome metrics extracted yet.
Abstract
Efficient hydrogen utilization by microorganisms is crucial for improving the energy-to-chemical efficiency in microbial electrosynthesis (MES). We therefore developed a new rectangular zero-gap cell design featuring an extended flow path to improve hydrogen retention and conversion to biomethane. Multiphase flow modeling within porous carbon felt cathodes revealed the new configuration with a trapezoidal inlet substantially reduced flow dead zones and tripled hydrogen retention time versus circular cells. At -1 V vs Ag/AgCl, increasing catholyte flow rate from 0.8 to 2.5 mL/min raised current densities from 19 to 24 A/m 2 (30 °C), reaching a peak Coulombic efficiency (CE) of 82% for methane production (7.0 L/L-d). Further increasing the flow rate to 7.5 mL/min or temperature to 37 °C slightly improved methane production (7.2-7.7 L/L-d) but reduced hydrogen retention in cells based on modeling results, lowering CEs and energy efficiencies due to unreacted hydrogen. Matching cathode potential to flow rates and temperatures could balance H 2 production and retention, significantly improving CE to 96% toward 7.5 L/L-d methane production with a high energy efficiency of 36% (-0.95 V vs Ag/AgCl, 37 °C). These findings underscore the importance of improving flow distribution and hydrogen retention within zero-gap MES cells to enhance energy and Coulombic efficiencies.