Controllable fabrication of hierarchical porous anode for exoelectrogens internal colonization in microbial electrochemical system.
AI summary
75% confidenceResearchers developed a hierarchical porous anode for microbial electrochemical systems (MES) with controlled millimeter-scale macropores, achieving a 2.1-fold increase in maximum power density compared to carbon-cloth anodes.
Generated by MESSAI extraction pipeline · review against source PDF
No 3D model is mapped to this paper yet. Parameter ranges above still place reported values on the literature distribution.
Abstract
Efficient interfacial energy conversion and rapid charge transfer are crucial for application-oriented microbial electrochemical systems (MES) and depend on affordable high-performance anodes. Herein, hierarchically porous 3D anodes with controlled millimeter-scale macropores (1-2 mm) were fabricated via carbonization of phenolic foam embedded with expanded polystyrene (EPS) sacrificial templates. Optimizing EPS loading (4 wt%) and pore-sizes yielded anode L-4M, exhibiting appropriate hydrophilicity (contact angle: 60.0 ± 0.7°) and enhanced electrochemically active surface area (ECSA: 61 cm 2 ) attributed to surface oxygen-containing groups and multiscale porosity. The L-4M achieved a remarkable maximum power density of 3800 ± 80 mW m -2 , 2.1-fold higher than carbon-cloth anodes. Engineered macropores facilitated unprecedented microbial colonization depth (≥ 2.5 mm) and biomass density (1300 ± 36 μg cm -2 ) predominated by Geobacter sp. (75 % relative abundance). This millimeter-scale pore engineering strategy enhanced bio-accessible surface area, substrate diffusion, and electroactive biofilm development, offering a scalable approach for high-current-density MES.