Apparent specific surface area as an indicator of the degree of cellulose microfibrillation

Abstract

Tracking mechanical microfibrillation in nanocellulose production is time-consuming due to a lack of quick characterization methods. This study investigates optical monitoring of the mechanical microfibrillation process by determining the dimensions of microfibrillated cellulose (MFC) particles on micron scale. Bleached hardwood pulp was microfibrillated using three sets of grinding discs in a six-stage pilot process, analyzing MFC characteristics as a function of specific energy consumption via image analysis. A laboratory-scale ultrafine grinder was also used for comparison. The degree of microfibrillation was assessed over a broad energy range using the equivalent diameter derived from the MFC length and width through image processing. The microfibrillation process adhered to Rittinger’s law, i.e., changes in the apparent specific surface area (SSA) were linearly proportional to the applied grinding energy. SSA, being inversely proportional to equivalent diameter, predicted MFC quality in terms of nanofilm strength properties. The optical fiber image analyzer proved suitable for online monitoring and control of microfibrillation processes. Despite resolution limits in detecting sub-micron particles, their proportion interrelates to the size of optically visible particles, covering industrial needs for mechanical microfibrillation.

Keywords

Identifiers

DOI

10.1007/s10570-024-06301-0

Journal

Cellulose

Year

2024