AI summary

100% confidence

Advanced BES research focusing on electrode, performance. Anaerobic digestion (AD) is a widely used technique to treat organic waste and produce biogas. This article presents a practical approach to i...

Generated by MESSAI extraction pipeline · review against source PDF

Microbial electrochemical systemRepresentative model
Click to animate flow
loading 3D model…

Representative microbial electrochemical system — matched on the paper’s system type only, not its reactor or geometry.

Extraction

Reported parameters

4 extracted values

View extracted values

Open in lab for full controls, parameter editing, and template overlays.

Open in lab →

What they did

System
MES

What worked

No outcome metrics extracted yet.

Abstract

Anaerobic digestion (AD) is a widely used technique to treat organic waste and produce biogas. This article presents a practical approach to increase biogas yield of an AD system using a microbial electrosynthesis system (MES). The biocathode in MES reduces carbon dioxide with the supplied electrons and protons (H+) to form methane. We demonstrate that the MES is able to produce biogas with over 90% methane when fed with reject water obtained from a local wastewater treatment plant. The optimised cathode potential was observed in the range of −0.70 V to −0.60 V and optimised feed pH was around 7.0. With autoclaved feed, these conditions allowed methane yields of about 9.05 mmol/L(reactor)-day. A control experiment was then carried out to make a comparison between open circuit and MES methanogenesis. The highest methane yield of about 22.1 mmol/L(reactor)-day was obtained during MES operation that performed 10–15% better than the open circuit mode of operation. We suggest and describe an integrated AD-MES system, by installing MES in the reject water loop, as a novel approach to improve the efficiency and productivity of existing waste/wastewater treatment plants.

Keywords

BiogasMethaneMethanogenesisAnaerobic digestionWaste managementWastewater

Identifiers

Journal
Applied Sciences
Year
2019