MESSAI.iO

AI summary

100% confidence

MES research with industrial-applications focus on industrial, standard. SS and Cu electrodes were used in the electrochemical coagulation to treat pulp and paper mill wastewater using ...

Generated by MESSAI extraction pipeline · review against source PDF

Literature priors

Distribution

Reported parameters

The author’s reported value (▼) sits on top of the literature distribution from MESS-Parameters. Values outside the band are flagged as outliers.

Coulombic efficiency9.64%

3 extracted values

View extracted values

No 3D model is mapped to this paper yet. Parameter ranges above still place reported values on the literature distribution.

Abstract

SS and Cu electrodes were used in the electrochemical coagulation to treat pulp and paper mill wastewater using 4SS and 3SS 1Cu electrodes by applying cell voltages 12 – 24 V. Optimal cell voltage 18V showed COD removal of 89.64% for 4SS electrode and 84.74% for 3SS 1Cu electrode with simultaneous color removal of 99% and 90%. Other control factors used for optimal operation are sludge volume index (SVI), filterability, etc. SVI values were <100 mL/g for 4SS electrodes. The filtration characteristics of the ECC-treated sludge were established to determine the specific cake resistance (α) and the resistance of the filter medium (R m ). Lower α and R m values for 4SS and 3SS-1Cu electrodes were found at 60 min ET. Proximate and ultimate analyses showed that 4SS and 3SS-1Cu sludge could be used as additive as well as adsorbent material for treating low strength wastewater.

Keywords

ElectrodeWastewaterPulp and paper industryPulp (tooth)Filtration (mathematics)Electrochemistry

Identifiers

DOI
10.1149/10701.8077ecst
Journal
ECS Transactions
Year
2022