Use of biokaolinite clay for the microbial removal of phenol from real industrial wastewater samples by Dermacoccus nishinomiyaensis and Kocuria rosea
M. E. M. Hassouna, Marzooka Shaban Abdel‐Tawab, Adel Ahmed Mohamed Abdel‐Aleem
AI summary
100% confidenceMES research in bacteria, performance. Phenol bioremediation was investigated using two bacteria (primarily cocci) Dermacoccus nishinomiyae...
Generated by MESSAI extraction pipeline · review against source PDF
Literature priors
Reported parameters
The author’s reported value (▼) sits on top of the literature distribution from MESS-Parameters. Values outside the band are flagged as outliers.
5 extracted values
View extracted valuesNo 3D model is mapped to this paper yet. Parameter ranges above still place reported values on the literature distribution.
Abstract
Phenol bioremediation was investigated using two bacteria (primarily cocci) Dermacoccus nishinomiyaensis, Kocuria rosea strains and the one actinomycetes Nocardiopsis lucentensis which were isolated from samples of activated sludge from the wastewater treatment plant (WWTP) in Beni‐Suef, Egypt as sole carbon and energy sources. This was applied on real industrial wastewater sample taken from Ul HAWA textile plant, Middle Egypt. Degradation of phenol by microbes adsorbed on natural kaolin clay was studied compared with free microbes. In case of 50 mg/L as starting phenol concentration, the percentage removal using free microbes was 68%, corresponding to 98% in case of microbes adsorbed on kaolin clay after the passage of 48 h under incubation at 30°C and neutral pH at 150 rpm. Also, 300 mg/L of phenol achieved degradation frequency of 80% compared to 38% after ≈48 h without clay addition. High concentrations of an organic pollutant are usually inhibitory for the microorganisms. Kaolin clay has a pronounced effect in accelerating phenol degradation through biofilm formation resulting in decreasing the degradation time, increasing the percentage of removing efficiency under high phenol concentration conditions due to its buffering effects on pH fluctuations of the degradation system. Kaolin clay protects microorganisms against unfavorable environment, resists the adverse effects of substrate inhibition and accelerates the degradation process. The adsorption process was demonstrated by the pseudo‐first‐order, pseudo‐second‐order, Weber–Morris adsorption kinetic models, and four isotherm models namely, Langmuir, Freundlich, Temkin, and Dubinin–Radushkevich have been applied to express the adsorption process. The SEM images of microbes adsorbed on kaolin clay explain their adsorption mode on the clay surface as biofilm (Bio kaolinite).
Keywords
Identifiers
- Journal
- Environmental Quality Management
- Year
- 2024