Autonomous Device for Evaluating the Field Performance of Microbial Fuel Cells in Remote Areas

Abstract

The performance of sediment microbial fuel cells (SMFCs) in the field must be evaluated prior to their being relied on as a power source for sensor networks. Currently, the ability to perform such evaluation is limited. The goal of this work was to develop an autonomous, battery-powered, low-cost device (a remote sediment microbial fuel cell tester, or RSMFCT) that can evaluate the field performance of SMFCs charging capacitors in remote areas. The developed RSMFCT allows an SMFC to charge a capacitor between preset charge and discharge potentials and monitors anode and cathode potentials, capacitor potential, and temperature. The RSMFCT was tested at a remote location in the Hot Lake Research Natural Area, near Oroville,WA, USA and used to evaluate the optimum conditions for operating an SMFC. Using the recorded data, the average power and frequency of cycle were determined. We found that SMFCs deployed in Hot Lake operated optimally when charging a 5-F capacitor from 300 mV to 400 mV. Under these conditions, the SMFCs produced an average daily power of 10.28 μW and required an average capacitor charging time of 3.08 hours. We conclude that the RSMFCT is practical for: 1) determining the optimum operation parameters, those that maximize the power output of SMFCs in field operation, and 2) reliably incorporating individual SMFCs as power sources for remote sensor networks by allowing the prediction of their power output and frequency of charge cycles. © The Author(s) 2016. Published by ECS. This is an open access article distributed under the terms of the Creative Commons Attribution 4.0 License (CC BY, http://creativecommons.org/licenses/by/4.0/), which permits unrestricted reuse of the work in any medium, provided the original work is properly cited. [DOI: 10.1149/2.0041703jes] All rights reserved.

Keywords

Identifiers

DOI

10.1149/2.0041703JES

Journal

Journal of The Electrochemical Society

Year

2017