Innovative sandwich electrode-assembled bioelectrochemical system for efficient organic pollutants removal in low-conductivity groundwater.
AI summary
75% confidenceA sandwich electrode-assembled bioelectrochemical system (SEA-BES) was developed to improve pollutant removal in low-conductivity groundwater, achieving higher removal rates and lower energy demand compared to conventional BES.
Generated by MESSAI extraction pipeline · review against source PDF
No 3D model is mapped to this paper yet. Parameter ranges above still place reported values on the literature distribution.
Abstract
Rapid industrialization has caused widespread global groundwater contamination. Bioelectrochemical systems (BES), as a promising in-situ groundwater remediation technology, are limited by the low conductivity of natural groundwater (< 1000 μS cm -1 ). To address this constraint, this study developed a sandwich electrode-assembled BES (SEA-BES), evaluated its pollutant removal performance with nitrobenzene (NB) as an example, and conducted pilot-scale tests. A non-woven cloth separator reduced SEA-BES electrode spacing to the μm-scale. The SEA-BES significantly reduced solution resistance in low-conductivity groundwater (from 66.5 Ω in conventional BES to 1.0 Ω at 250 μS cm -1 ) and achieved low energy demand (0.086 kWh mg -1 COD). Pseudo-first-order kinetic analysis of NB removal (initial NB concentration: 40 mg L -1 ; treatment time: 24 h) revealed significantly higher rate constants for the SEA-BES (0.1149 h -1 , R 2 =0.9985), which was 1.39-fold higher than that of the conventional BES (0.0827 h -1 , R 2 =0.9991). This enhancement is mainly attributed to optimized electron transfer (especially enhanced direct electron transfer), enriched targeted functional genera (e.g., Methanobacterium), and reduced dependence on EPS-mediated stress compensation. This study further developed an intermittent electrical stimulation mode to boost applicability and reduce energy use, achieving 74.23 % TOC mineralization, which was 18.32 % higher than that of the continuous stimulation mode. A 46-day pilot test confirmed stable pollutant removal. In summary, the SEA-BES with an intermittent electrical stimulation mode provides an efficient, low-energy solution for remediating organic pollutant-contaminated low-conductivity groundwater.