Research Library

Renewable and Sustainable Energy Reviews · 2021

ACS Omega · 2023

Surfactants are a group of amphiphilic molecules (i.e., having both hydrophobic and hydrophilic domains) that are a vital part of nearly every contemporary industrial process such as in agriculture, medicine, personal care, food, and petroleum. In general surfactants can be derived from (i) petroleum-based sources or (ii) microbial/plant origins. Petroleum-based surfactants are obvious results from petroleum products, which lead to petroleum pollution and thus pose severe problems to the environment leading to various ecological damages. Thus, newer techniques have been suggested for deriving surfactant molecules and maintaining environmental sustainability. Biosurfactants are surfactants of microbial or plant origins and offer much added advantages such as high biodegradability, lesser toxicity, ease of raw material availability, and easy applicability. Thus, they are also termed "green surfactants". In this regard, this review focused on the advantages of biosurfactants over the synthetic surfactants produced from petroleum-based products along with their potential applications in different industries. We also provided their market aspects and future directions that can be considered with selections of biosurfactants. This would open up new avenues for surfactant research by overcoming the existing bottlenecks in this field.

Bioresource Technology · 2015

Scientific Reports · 2019

Abstract Recent work has disclosed the critical role played by enamel peptides in sex classification of old skeletal remains. In particular, protein AMELY (amelogenin isoform Y) is present in the enamel dental tissue of male individuals only, while AMELX (isoform X) can be found in both sexes. AMELY can be easily detected by LC-MS/MS in the ion extracted chromatograms of the SM (ox) IRPPY peptide (monoisotopic [M + 2 H] +2 mass = 440.2233 m/z ). In this paper, we exploited the dimorphic features of the amelogenin protein to determine the sex of the so-called ‘Lovers of Modena’, two Late Antique individuals whose skeletons were intentionally buried hand-in-hand. Upon discovery, mass media had immediately assumed they were a male-female couple, even if bad preservation of the bones did not allow an effective sex classification. We were able to extract proteins from the dental enamel of both individuals (~1600 years old) and to confidently classify them as males. Results were compared to 14 modern and archaeological control samples, confirming the reliability of the ion chromatogram method for sex determination. Although we currently have no information on the actual relationship between the ‘Lovers of Modena’ (affective? Kin-based?), the discovery of two adult males intentionally buried hand-in-hand may have profound implications for our understanding of funerary practices in Late Antique Italy.

Frontiers in Nutrition · 2021

Food is subjected to various thermal treatments during processes to enhance its shelf-life. But these thermal treatments may result in deterioration of the nutritional and sensory qualities of food. With the change in the lifestyle of people around the globe, their food needs have changed as well. Today's consumer demand is for clean and safe food without compromising the nutritional and sensory qualities of food. This directed the attention of food professionals toward the development of non-thermal technologies that are green, safe, and environment-friendly. In non-thermal processing, food is processed at near room temperature, so there is no damage to food because heat-sensitive nutritious materials are intact in the food, contrary to thermal processing of food. These non-thermal technologies can be utilized for treating all kinds of food like fruits, vegetables, pulses, spices, meat, fish, etc. Non-thermal technologies have emerged largely in the last few decades in food sector.

Renewable energy focus · 2017

Journal of Materials Science · 2018

This review highlights advancements made in anion exchange membrane (AEM) head groups, polymer structures and membrane synthesis methods. Limitations of current analytical techniques for characterizing AEMs are also discussed. AEM research is primarily driven by the need to develop suitable AEMs for the high-pH and high-temperature environments in anion exchange membrane fuel cells and anion exchange membrane water electrolysis applications. AEM head groups can be broadly classified as nitrogen based (e.g. quaternary ammonium), nitrogen free (e.g. phosphonium) and metal cations (e.g. ruthenium). Metal cation head groups show great promise for AEM due to their high stability and high valency. Through “rational polymer architecture”, it is possible to synthesize AEMs with ion channels and improved chemical stability. Heterogeneous membranes using porous supports or inorganic nanoparticles show great promise due to the ability to tune membrane characteristics based on the ratio of polymer to porous support or nanoparticles. Future research should investigate consolidating advancements in AEM head groups with an optimized polymer structure in heterogeneous membranes to bring together the valuable characteristics gained from using head groups with improved chemical stability, with the benefits of a polymer structure with ion channels and improved membrane properties from using a porous support or nanoparticles.

Nature Nanotechnology · 2018

Biotechnology Advances · 2020

Nature Biomedical Engineering · 2021

Sensors · 2021

The detection of glucose is crucial in the management of diabetes and other medical conditions but also crucial in a wide range of industries such as food and beverages. The development of glucose sensors in the past century has allowed diabetic patients to effectively manage their disease and has saved lives. First-generation glucose sensors have considerable limitations in sensitivity and selectivity which has spurred the development of more advanced approaches for both the medical and industrial sectors. The wide range of application areas has resulted in a range of materials and fabrication techniques to produce novel glucose sensors that have higher sensitivity and selectivity, lower cost, and are simpler to use. A major focus has been on the development of enzymatic electrochemical sensors, typically using glucose oxidase. However, non-enzymatic approaches using direct electrochemistry of glucose on noble metals are now a viable approach in glucose biosensor design. This review discusses the mechanisms of electrochemical glucose sensing with a focus on the different generations of enzymatic-based sensors, their recent advances, and provides an overview of the next generation of non-enzymatic sensors. Advancements in manufacturing techniques and materials are key in propelling the field of glucose sensing, however, significant limitations remain which are highlighted in this review and requires addressing to obtain a more stable, sensitive, selective, cost efficient, and real-time glucose sensor.

Bioresource Technology · 2021

Bioresource Technology · 2016

Sensors · 2019

Carbon nanotubes (CNTs) have been widely studied and used for the construction of electrochemical biosensors owing to their small size, cylindrical shape, large surface-to-volume ratio, high conductivity and good biocompatibility. In electrochemical biosensors, CNTs serve a dual purpose: they act as immobilization support for biomolecules as well as provide the necessary electrical conductivity for electrochemical transduction. The ability of a recognition molecule to detect the analyte is highly dependent on the type of immobilization used for the attachment of the biomolecule to the CNT surface, a process also known as biofunctionalization. A variety of biofunctionalization methods have been studied and reported including physical adsorption, covalent cross-linking, polymer encapsulation etc. Each method carries its own advantages and limitations. In this review we provide a comprehensive review of non-covalent functionalization of carbon nanotubes with a variety of biomolecules for the development of electrochemical biosensors. This method of immobilization is increasingly being used in bioelectrode development using enzymes for biosensor and biofuel cell applications.

Frontiers in Chemistry · 2015

Nanomaterials possess unique features which make them particularly attractive for biosensing applications. In particular, carbon nanotubes (CNTs) can serve as scaffolds for immobilization of biomolecules at their surface, and combine several exceptional physical, chemical, electrical, and optical characteristics properties which make them one of the best suited materials for the transduction of signals associated with the recognition of analytes, metabolites, or disease biomarkers. Here we provide a comprehensive review on these carbon nanostructures, in which we describe their structural and physical properties, functionalization and cellular uptake, biocompatibility, and toxicity issues. We further review historical developments in the field of biosensors, and describe the different types of biosensors which have been developed over time, with specific focus on CNT-conjugates engineered for biosensing applications, and in particular detection of cancer biomarkers.

Biochemical Engineering Journal · 2018

Chemical Engineering Journal · 2018

Advanced Functional Materials · 2018

Abstract Mussel‐inspired chemistry has attracted widespread interest in membrane science and technology. Demonstrating the rapid growth of this field over the past several years, substantial progress has been achieved in both mussel‐inspired chemistry and membrane surface engineering based on mussel‐inspired coatings. At this stage, it is valuable to summarize the most recent and distinctive developments, as well as to frame the challenges and opportunities remaining in this field. In this review, recent advances in rapid and controllable deposition of mussel‐inspired coatings, dopamine‐assisted codeposition technology, and photoinitiated grafting directly on mussel‐inspired coatings are presented. Some of these technologies have not yet been employed directly in membrane science. Beyond discussing advances in conventional membrane processes, emerging applications of mussel‐inspired coatings in membranes are discussed, including as a skin layer in nanofiltration, interlayer in metal‐organic framework based membranes, hydrophilic layer in Janus membranes, and protective layer in catalytic membranes. Finally, some critical unsolved challenges are raised in this field and some potential pathways are proposed to address them.

Bioresource Technology · 2017

Trends in biotechnology · 2016

RSC Advances · 2015

Recent advancement in reduction methods of nitroarenes are reviewed. The different methods are classified based on the source of hydrogen utilized during reduction and the mechanism involved in the reduction process.

The Science of The Total Environment · 2020

Nanotechnology Reviews · 2017

Abstract Carbon has long been applied as an electrochemical sensing interface owing to its unique electrochemical properties. Moreover, recent advances in material design and synthesis, particularly nanomaterials, has produced robust electrochemical sensing systems that display superior analytical performance. Carbon nanotubes (CNTs) are one of the most extensively studied nanostructures because of their unique properties. In terms of electroanalysis, the ability of CNTs to augment the electrochemical reactivity of important biomolecules and promote electron transfer reactions of proteins is of particular interest. The remarkable sensitivity of CNTs to changes in surface conductivity due to the presence of adsorbates permits their application as highly sensitive nanoscale sensors. CNT-modified electrodes have also demonstrated their utility as anchors for biomolecules such as nucleic acids, and their ability to diminish surface fouling effects. Consequently, CNTs are highly attractive to researchers as a basis for many electrochemical sensors. Similarly, synthetic diamonds electrochemical properties, such as superior chemical inertness and biocompatibility, make it desirable both for (bio) chemical sensing and as the electrochemical interface for biological systems. This is highlighted by the recent development of multiple electrochemical diamond-based biosensors and bio interfaces.

AMBIO · 2015

Roadmaps towards sustainable bioeconomy, including the production of biofuels, in many EU countries mostly rely on biomass use. However, although biomass is renewable, the efficiency of biomass production is too low to be able to fully replace the fossil fuels. The use of land for fuel production also introduces ethical problems in increasing the food price. Harvesting solar energy by the photosynthetic machinery of plants and autotrophic microorganisms is the basis for all biomass production. This paper describes current challenges and possibilities to sustainably increase the biomass production and highlights future technologies to further enhance biofuel production directly from sunlight. The biggest scientific breakthroughs are expected to rely on a new technology called "synthetic biology", which makes engineering of biological systems possible. It will enable direct conversion of solar energy to a fuel from inexhaustible raw materials: sun light, water and CO2. In the future, such solar biofuels are expected to be produced in engineered photosynthetic microorganisms or in completely synthetic living factories.

Molecules · 2020

Our objective in this review article is to find out relevant information about methods of determination of antioxidant activity of silver nanoparticles. There are many studies dealing with mentioned problem and herein we summarize the knowledge about methods evaluating the antioxidant activity of silver nanoparticles reported so far. Many authors declare better antioxidant activity of silver nanoparticles compared to the extract used for synthesis of them. In this review, we focused on methods of antioxidant activity determination in detail to find out novel and perspective techniques to solve the general problems associated with the determination of antioxidant activity of silver nanoparticles.

Current Opinion in Biotechnology · 2019

Nanoscale Research Letters · 2015

Graphene may have attractive properties for some biomedical applications, but its potential adverse biological effects, in particular, possible modulation when it comes in contact with blood, require further investigation. Little is known about the influence of exposure to COOH(+)-implanted graphene (COOH(+)/graphene) interacting with red blood cells and platelets. In this paper, COOH(+)/graphene was prepared by modified Hummers' method and implanted by COOH(+) ions. The structure and surface chemical and physical properties of COOH(+)/graphene were characterized by scanning electron microscopy (SEM), X-ray photoelectron spectroscopy (XPS), and contact angle measurement. Systematic evaluation of anticoagulation, including in vitro platelet adhesion assays and hemolytic assays, proved that COOH(+)/graphene has significant anticoagulation. In addition, at the dose of 5 × 10(17) ions/cm(2), COOH(+)/graphene responded best on platelet adhesion, aggregation, and platelet activation.

Nano-Micro Letters · 2017

Two-dimensional (2D) transition metal oxide and chalcogenide (TMO&C)-based photocatalysts have recently attracted significant attention for addressing the current worldwide challenges of energy shortage and environmental pollution. The ultrahigh surface area and unconventional physiochemical, electronic and optical properties of 2D TMO&Cs have been demonstrated to facilitate photocatalytic applications. This review provides a concise overview of properties, synthesis methods and applications of 2D TMO&C-based photocatalysts. Particular attention is paid on the emerging strategies to improve the abilities of light harvesting and photoinduced charge separation for enhancing photocatalytic performances, which include elemental doping, surface functionalization as well as heterojunctions with semiconducting and conductive materials. The future opportunities regarding the research pathways of 2D TMO&C-based photocatalysts are also presented.

Nature Communications · 2017

, for the hydrogen production is found to be significantly higher than reported catalysts. It is even better than the benchmarking platinum catalyst. The molecule-like bimetallic nanocluster represents a class of catalysts that bridge homogeneous and heterogeneous catalysis and may provide a platform for the discovery of finely optimized catalysts.

Reviews in Environmental Science and Bio/Technology · 2015

Anaerobic digestion for the production of methane containing biogas is the classic example of a resource recovery process that combines stabilization of particulate organic matter or wastewater treatment with the production of a valuable end-product. Attractive features of the process include the production of a single end-product from a heterogeneous feedstock, and in-situ product separation of the gaseous end-product. Despite these intrinsic attractive properties of the process, the economic added value of the biogas produced is limited, enabling the development of alternative processes that yield higher-value end-products. Typically the production of higher value end-products from low value feedstock and industrial wastewater proceeds via intermediate production of organic acids (and carbon dioxide and molecular hydrogen). Optimization of organic acid production from particulate feedstocks and wastewater for development of the organic acid based resource recovery route receives significant research attention. The organic acid stream generated as such, has no economic value, but if organic acids can either be concentrated via membrane separation or (bio)converted to an end-product that can easily be separated from the liquid, an attractive biomass processing scheme can be developed. Attractive end-products of organic acid processing include polyhydroxyalkanoates, medium chain length fatty acids, or other organic molecules using bio-electrochemical systems. Overall we suggest that these novel bioprocessing routes for conversion of low value feedstock to higher added value products will contribute to a sustainable future and will change the economic status of organic waste.

Small · 2017

Novel self-powered nanoscale photodetectors that can work without an external power source, which have great application potential in next-generation nanodevices that operate wirelessly and independently, are being widely studied. This review aims to give a comprehensive summary of the state-of-the-art research results on self-powered nanoscale photodetectors. An introduction of recent progress on Schottky junction photodetectors is provided. Two types of Schottky junctions are discussed in detail: metal-semiconductor and semiconductor-graphene junctions. Next, recent developments of p-n junction photodetectors are highlighted, including homojunction and heterojunction photodetectors. Then, piezo-phototronic effect enhanced photodetection performances of Schottky junctions and p-n junctions are discussed. Then, significant results on the photoelectrochemical-cell-based photodetector and integrated self-powered nanosystem are presented, followed by a systematic comparison of different types of photodetectors. Finally, a summary of the previous results is given, and the major challenges that need to be addressed in the future are outlined. The hope is that this review can provide valuable insights into the current status of self-powered photodetectors and spur new structure and device designs to further enhance photodetection performance.

Advances in microbial physiology/Advances in Microbial Physiology · 2015

Water Research · 2015

Nano Energy · 2018

Allergy · 2023

BACKGROUND: Asthma and atopic dermatitis (AD) are chronic allergic conditions, along with allergic rhinitis and food allergy and cause high morbidity and mortality both in children and adults. This study aims to evaluate the global, regional, national, and temporal trends of the burden of asthma and AD from 1990 to 2019 and analyze their associations with geographic, demographic, social, and clinical factors. METHODS: Using data from the Global Burden of Diseases (GBD), Injuries, and Risk Factors Study 2019, we assessed the age-standardized prevalence, incidence, mortality, and disability-adjusted life years (DALYs) of both asthma and AD from 1990 to 2019, stratified by geographic region, age, sex, and socio-demographic index (SDI). DALYs were calculated as the sum of years lived with disability and years of life lost to premature mortality. Additionally, the disease burden of asthma attributable to high body mass index, occupational asthmagens, and smoking was described. RESULTS: In 2019, there were a total of 262 million [95% uncertainty interval (UI): 224-309 million] cases of asthma and 171 million [95% UI: 165-178 million] total cases of AD globally; age-standardized prevalence rates were 3416 [95% UI: 2899-4066] and 2277 [95% UI: 2192-2369] per 100,000 population for asthma and AD, respectively, a 24.1% [95% UI: -27.2 to -20.8] decrease for asthma and a 4.3% [95% UI: 3.8-4.8] decrease for AD compared to baseline in 1990. Both asthma and AD had similar trends according to age, with age-specific prevalence rates peaking at age 5-9 years and rising again in adulthood. The prevalence and incidence of asthma and AD were both higher for individuals with higher SDI; however, mortality and DALYs rates of individuals with asthma had a reverse trend, with higher mortality and DALYs rates in those in the lower SDI quintiles. Of the three risk factors, high body mass index contributed to the highest DALYs and deaths due to asthma, accounting for a total of 3.65 million [95% UI: 2.14-5.60 million] asthma DALYs and 75,377 [95% UI: 40,615-122,841] asthma deaths. CONCLUSIONS: Asthma and AD continue to cause significant morbidity worldwide, having increased in total prevalence and incidence cases worldwide, but having decreased in age-standardized prevalence rates from 1990 to 2019. Although both are more frequent at younger ages and more prevalent in high-SDI countries, each condition has distinct temporal and regional characteristics. Understanding the temporospatial trends in the disease burden of asthma and AD could guide future policies and interventions to better manage these diseases worldwide and achieve equity in prevention, diagnosis, and treatment.

Scientific Reports · 2018

Alternative methods, including green synthetic approaches for the preparation of various types of nanoparticles are important to maintain sustainable development. Extracellular or intracellular extracts of fungi are perfect candidates for the synthesis of metal nanoparticles due to the scalability and cost efficiency of fungal growth even on industrial scale. There are several methods and techniques that use fungi-originated fractions for synthesis of gold nanoparticles. However, there is less knowledge about the drawbacks and limitations of these techniques. Additionally, identification of components that play key roles in the synthesis is challenging. Here we show and compare the results of three different approaches for the synthesis of gold nanoparticles using either the extracellular fraction, the autolysate of the fungi or the intracellular fraction of 29 thermophilic fungi. We observed the formation of nanoparticles with different sizes (ranging between 6 nm and 40 nm) and size distributions (with standard deviations ranging between 30% and 70%) depending on the fungi strain and experimental conditions. We found by using ultracentrifugal filtration technique that the size of reducing agents is less than 3 kDa and the size of molecules that can efficiently stabilize nanoparticles is greater than 3 kDa.

Heliyon · 2023

A sensor can be called ideal or perfect if it is enriched with certain characteristics viz., superior detections range, high sensitivity, selectivity, resolution, reproducibility, repeatability, and response time with good flow. Recently, biosensors made of nanoparticles (NPs) have gained very high popularity due to their excellent applications in nearly all the fields of science and technology. The use of NPs in the biosensor is usually done to fill the gap between the converter and the bioreceptor, which is at the nanoscale. Simultaneously the uses of NPs and electrochemical techniques have led to the emergence of biosensors with high sensitivity and decomposition power. This review summarizes the development of biosensors made of NPssuch as noble metal NPs and metal oxide NPs, nanowires (NWs), nanorods (NRs), carbon nanotubes (CNTs), quantum dots (QDs), and dendrimers and their recent advancement in biosensing technology with the expansion of nanotechnology.

Frontiers in Plant Science · 2020

Mankind has recognized the value of land plants as renewable sources of food, medicine, and materials for millennia. Throughout human history, agricultural methods were continuously modified and improved to meet the changing needs of civilization. Today, our rapidly growing population requires further innovation to address the practical limitations and serious environmental concerns associated with current industrial and agricultural practices. Microalgae are a diverse group of unicellular photosynthetic organisms that are emerging as next-generation resources with the potential to address urgent industrial and agricultural demands. The extensive biological diversity of algae can be leveraged to produce a wealth of valuable bioproducts, either naturally or via genetic manipulation. Microalgae additionally possess a set of intrinsic advantages, such as low production costs, no requirement for arable land, and the capacity to grow rapidly in both large-scale outdoor systems and scalable, fully contained photobioreactors. Here, we review technical advancements, novel fields of application, and products in the field of algal biotechnology to illustrate how algae could present high-tech, low-cost, and environmentally friendly solutions to many current and future needs of our society. We discuss how emerging technologies such as synthetic biology, high-throughput phenomics, and the application of internet of things (IoT) automation to algal manufacturing technology can advance the understanding of algal biology and, ultimately, drive the establishment of an algal-based bioeconomy.

Nanomaterials · 2021

Recent advances in nanomaterial design and synthesis has resulted in robust sensing systems that display superior analytical performance. The use of nanomaterials within sensors has accelerated new routes and opportunities for the detection of analytes or target molecules. Among others, carbon-based sensors have reported biocompatibility, better sensitivity, better selectivity and lower limits of detection to reveal a wide range of organic and inorganic molecules. Carbon nanomaterials are among the most extensively studied materials because of their unique properties spanning from the high specific surface area, high carrier mobility, high electrical conductivity, flexibility, and optical transparency fostering their use in sensing applications. In this paper, a comprehensive review has been made to cover recent developments in the field of carbon-based nanomaterials for sensing applications. The review describes nanomaterials like fullerenes, carbon onions, carbon quantum dots, nanodiamonds, carbon nanotubes, and graphene. Synthesis of these nanostructures has been discussed along with their functionalization methods. The recent application of all these nanomaterials in sensing applications has been highlighted for the principal applicative field and the future prospects and possibilities have been outlined.

Polymers · 2021

The study of the electrochemical catalyst conversion of renewable electricity and carbon oxides into chemical fuels attracts a great deal of attention by different researchers. The main role of this process is in mitigating the worldwide energy crisis through a closed technological carbon cycle, where chemical fuels, such as hydrogen, are stored and reconverted to electricity via electrochemical reaction processes in fuel cells. The scientific community focuses its efforts on the development of high-performance polymeric membranes together with nanomaterials with high catalytic activity and stability in order to reduce the platinum group metal applied as a cathode to build stacks of proton exchange membrane fuel cells (PEMFCs) to work at low and moderate temperatures. The design of new conductive membranes and nanoparticles (NPs) whose morphology directly affects their catalytic properties is of utmost importance. Nanoparticle morphologies, like cubes, octahedrons, icosahedrons, bipyramids, plates, and polyhedrons, among others, are widely studied for catalysis applications. The recent progress around the high catalytic activity has focused on the stabilizing agents and their potential impact on nanomaterial synthesis to induce changes in the morphology of NPs.