Discover insights from thousands of peer-reviewed papers on microbial electrochemical systems
Mingdang Tian, Chenmin Ni, Baohuai Sheng et al.
Mathematical Foundations of Computing · 2025
· 0
· 0
· 0
· 0
· 0
M. Azizul Moqsud
IntechOpen eBooks · 2024
· 0
· 0
· 0
· 0
· 0
· 0
· 0
· 0
Aidan Francis Meese, David J. Kim, Xuanhao Wu et al.
ACS ES&T Engineering · 2021
Juan Pablo, Nicholas E. Jackson, Michael A. Webb et al.
npj Computational Materials · 2019
The development of biodegradable soft robotics requires an appropriate eco-friendly source of energy. The use of Microbial Fuel Cells (MFCs) is suggested as they can be designed completely from soft materials with little or no negative effects to the environment. Nonetheless, their responsiveness and functionality is not strictly defined as in other conventional technologies, i.e. lithium batteries. Consequently, the use of artificial intelligence methods in their control techniques is highly recommended. The use of neural networks, namely a nonlinear autoregressive network with exogenous inputs was employed to predict the electrical output of an MFC, given its previous outputs and feeding volumes. Thus, predicting MFC outputs as a time series, enables accurate determination of feeding intervals and quantities required for sustenance that can be incorporated in the behavioural repertoire of a soft robot.
· 0
Microbial fuel cells (CS-UFC) utilize waste resources containing biodegradable materials that play an essential role in green energy. MFC technology generates "carbon-neutral" bioelectricity and involves a multidisciplinary approach to microbiology. MFCs will play an important role in the harvesting of "green electricity." In this study, a single-chamber urea fuel cell is fabricated that uses these different wastewaters as fuel to generate power. Soil has been used to generate electrical power in microbial fuel cells and exhibited several potential applications to optimize the device; the urea fuel concentration is varied from 0.1 to 0.5 g/mL in a single-chamber compost soil urea fuel cell (CS-UFC). The proposed CS-UFC has a high power density and is suitable for cleaning chemical waste, such as urea, as it generates power by consuming urea-rich waste as fuel. The CS-UFC generates 12 times higher power than conventional fuel cells and exhibits size-dependent behavior. The power generation increases with a shift from the coin cell toward the bulk size. The power density of the CS-UFC is 55.26 mW/m 2 . This result confirmed that urea fuel significantly affects the power generation of single-chamber CS-UFC. This study aimed to reveal the effect of soil properties on the generated electric power from soil processes using waste, such as urea, urine, and industrial-rich wastewater as fuel. The proposed system is suitable for cleaning chemical waste; moreover, the proposed CS-UFC is a novel, sustainable, cheap, and eco-friendly design system for soil-based bulk-type design for large-scale urea fuel cell applications.
Querido, Micaela Alexandra Machado
Indian Journal of Continuing Nursing Education · 2021
Bioelectrochemical systems offer unique opportunities to remove recalcitrant environmental pollutants in a net positive energy process, although it remains challenging because of the toxic character of such compounds. In this study, microbial fuel cell (MFC) technology was applied to investigate the benzene degradation process for more than 160 days, where glucose was used as a co-metabolite and a control. We have applied an inoculation strategy that led to the development of 10 individual microbial communities. The electrochemical dynamics of MFC efficiency was observed, along with their 1 H NMR metabolic fingerprints and analysis of the microbial community. The highest power density of 120 mW/m 2 was recorded in the final period of the experiment when benzene/glucose was used as fuel. This is the highest value reported in a benzene/co-substrate system. Metabolite analysis confirmed the full removal of benzene, while the dominance of fermentation products indicated the strong occurrence of non-electrogenic reactions. Based on 16S rRNA gene amplicon sequencing, bacterial community analysis revealed several petroleum-degrading microorganisms, electroactive species and biosurfactant producers. The dominant species were recognised as Citrobacter freundii and Arcobacter faecis . Strong, positive impact of the presence of benzene on the alpha diversity was recorded, underlining the high complexity of the bioelectrochemically supported degradation of petroleum compounds. This study reveals the importance of supporting the bioelectrochemical degradation process with auxiliary substrates and inoculation strategies that allow the communities to reach sufficient diversity to improve the power output and degradation efficiency in MFCs beyond the previously known limits. This study, for the first time, provides an outlook on the syntrophic activity of biosurfactant producers and petroleum degraders towards the efficient removal and conversion of recalcitrant hydrophobic compounds into electricity in MFCs.
Korneel Rabaey, Jorge Rodríguez, Linda L. Blackall et al.
The ISME Journal · 2007
Lola Gonzalez Olias, Petra J. Cameron, Mirella Di Lorenzo
Frontiers in Energy Research · 2019
Chunli Chen, Xue Wang, Wenlong Li et al.
Environmental Engineering Research · 2024
· 0
Gian Luigi Garbini, Anna Barra Caracciolo, Paola Grenni
Microorganisms · 2023
Tahseena Naaz, Ankit Kumar, Anusha Vempaty et al.
Environmental Engineering Research · 2023
Qijian Ouyang, Zhiwei Xie, Jinhai Liu et al.
Polymers · 2022
Abdelghani Ghanam, Sébastien Cecillon, Andreï Sabac et al.
Micromachines · 2023
Microbial fuel cells (MFCs) are widely acknowledged to be a promising eco-friendly abatement technology of pollutants, and are capable of generating electricity. However, the poor mass transfer and reaction rate in MFCs significantly decrease their treatment capacity for contaminants, especially hydrophobic substances. The present work developed a novel MFC integrated with an airlift (ALR) reactor using a polypyrrole modified anode to promote the bioaccessibility of gaseous o -xylene and attachment of microorganisms. The results indicated that the established ALR-MFC system showed excellent elimination capability, with removal efficiency exceeding 84% even at high o -xylene concentration (1600 mg m -3 ). The maximum output voltage of 0.549 V and power density of 13.16 mW m -2 obtained by the Monod-type model were approximately twice and sixfold higher than that of a conventional MFC, respectively. According to the microbial community analysis, the superior performances of the ALR-MFC in terms of o -xylene removal and power generation were mainly ascribed to the enrichment of degrader ( i.e. Shinella ) and electrochemical active bacteria ( i.e. Proteiniphilum ). Moreover, the electricity generation of the ALR-MFC did not decrease at a high O 2 concentration, as O 2 was conducive to o -xylene degradation and electron release. The supplication of an external carbon source such as sodium acetate (NaAc) was conducive to increasing output voltage and coulombic efficiency. The electrochemical analysis revealed that released electrons can be transmitted with the action of NADH dehydrogenase to OmcZ, OmcS, and OmcA outer membrane proteins via a direct or indirect pathway, and ended up transferring to the anode directly.
· 0
· 0
Xiaomin Li, Ka Yu Cheng, Ammaiyappan Selvam et al.
Process Biochemistry · 2012
Markus G. Weinbauer
FEMS Microbiology Reviews · 2003
A mesophilic (37 °C) and a thermophilic (55 °C) two-chamber microbial fuel cell (MFC) were studied and compared for their power production from xylose and the microbial communities involved. The anode-attached, membrane-attached, and planktonic microbial communities, and their respective active subpopulations, were determined by next generation sequencing (Illumina MiSeq), based on the presence and expression of the 16S rRNA gene. Geobacteraceae accounted for 65% of the anode-attached active microbial community in the mesophilic MFC, and were associated to electricity generation likely through direct electron transfer, resulting in the highest power production of 1.1 W m -3 . A lower maximum power was generated in the thermophilic MFC (0.2 W m -3 ), likely due to limited acetate oxidation and the competition for electrons by hydrogen oxidizing bacteria and hydrogenotrophic methanogenic archaea. Aerobic microorganisms, detected among the membrane-attached active community in both the mesophilic and thermophilic MFC, likely acted as a barrier for oxygen flowing from the cathodic chamber through the membrane, favoring the strictly anaerobic exoelectrogenic microorganisms, but competing with them for xylose and its degradation products. This study provides novel information on the active microbial communities populating the anodic chamber of mesophilic and thermophilic xylose-fed MFCs, which may help in developing strategies to favor exoelectrogenic microorganisms at the expenses of competing microorganisms.
Venkatesh Chaturvedi, Pradeep Verma
Bioresources and Bioprocessing · 2016
Yushi Tian, Xiaoxue Mei, Qing Liang et al.
RSC Advances · 2017
· 0
· 0
· 0
· 0
· 0
· 0