Discover insights from thousands of peer-reviewed papers on microbial electrochemical systems
Rahul Gautam, Uttam Kumar Ghosh
Global NEST International Conference on Environmental Science & Technology · 2023
The energy consumption around the world has increased significantly and depleting reserves posing a major concern. The green energy sources are the need of the hour to counter the fuel scarcity and souring prices. Hydrogen production through a microbial electrolysis cell (MEC) is an effective and green technology. It is a bio-electrochemical system where microbial oxidation of organic feed at anode and reduction of protons to Hydrogen at cathode takes place. To derive hydrogen evolution reaction (HER) over the cathode, an external applied voltage of 0.2V is required which is very nominal in comparison to the voltage required for water electrolysis. In the present study, the reactor digestate derived biochar biocatalyst was evaluated for its impact in the process parameter enhancements. The bio-catalyzed membrane-less single chambered MEC (BC-SC-MEC) in a batch mode at an applied voltage of 0.8 V had resulted into higher COD removal efficiency and hydrogen production rates at 30 ± 2 °C (Fig.1). The COD removal of 78%, with Coulombic efficiency of 60% and cathodic hydrogen recovery of 52 % were reported in BC-SC-MEC, while SC-MEC resulted into COD removal of 72%, coulombic efficiency of 55% and cathodic hydrogen recovery of 48% were reported. These results support the claim of boosted hydrogen production in the bio-catalyzed MEC for enhanced energy recovery.
Devi Radhika, Archana Shivakumar, Deepak Kasai et al.
Energies · 2022
Microbial electrolysis cells (MECs) have been explored for various applications, including the removal of industrial pollutants, wastewater treatment chemical synthesis, and biosensing. On the other hand, MEC technology is still in its early stages and faces significant obstacles regarding practical large-scale implementations. MECs are used for energy generation and hydrogen peroxide, methane, hydrogen/biohydrogen production, and pollutant removal. This review aimed to investigate the aforementioned uses in order to better understand the different applications of MECs in the following scenarios: MECs for energy generation and recycling, such as hydrogen, methane, and hydrogen peroxide; contaminant removal, particularly complex organic and inorganic contaminants; and resource recovery. MEC technology was examined in terms of new concepts, configuration optimization, electron transfer pathways in biocathodes, and coupling with other technologies for value-added applications, such as MEC anaerobic digestion, combined MEC–MFC, and others. The goal of the review was to help researchers and engineers understand the most recent developments in MEC technologies and applications.
S. A. Hussain, M. Perrier, B. Tartakovsky
RSC Advances · 2018
This study describes a new approach for achieving stable long-term performance and maximizing removal of chemical oxygen demand (COD) in a Microbial Electrolysis Cell (MEC) by periodic disconnection of the MEC power supply.
Uttam Ghosh, Rahul Gautam
Global NEST International Conference on Environmental Science & Technology · 2023
The microbial electrolysis cell is gaining advantage over the other biological hydrogen production techniques as it requires less energy for hydrogen generation as compared to the water electrolysis process. The present study aims to assess the aptness of Agro-Industry Waste (AIW) fed membrane-less single chambered Microbial Electrolysis Cell (SC-MEC) for the biohydrogen production in batch mode under applied voltage of 1 V at 30 ± 2 °C (Fig.1). The performance of the reactor was assessed through volume of hydrogen per gram of COD removed, columbic efficiency, cathodic hydrogen recovery and COD removal efficiency. The highest COD removal of 71% was reported with columbic efficiency of around 45%. These results demonstrated an energy-efficient approach for biohydrogen production from AIW coupled with waste mitigation.
René Alejandro Flores-Estrella, Uriel de Jesús Garza-Rubalcava, Andreas Haarstrick et al.
Processes · 2019
In this work, a mathematical description of a Microbial Electrolysis Cell (MEC) is proposed, taking into account the global mass balances of the different species in the system and considering that all the involved microorganisms are attached to the anodic biological film. Three main biological reactions are introduced, which were obtained from the solution of partial differential equations describing the spatial distribution of potential and substrate in the biofilm. The simulation of the model was carried out using numerical methods, and the results are discussed.
Kenan Dalkilic, Aysenur Ugurlu
Research Square · 2022
Abstract The aim of study was to enhance the biogas production from cattle manure in a combined microbial electrolysis cell and anaerobic digestion system (MEC + AD). The MEC + AD reactor were operated on semi continuous mode under different voltage applications and different organic loading rates ranging from 6 g VS/L.d to 30 g VS/L.d. The study was carried out in two parts. In the first part, MEC + AD and conventional anaerobic reactors were compared in terms of biogas production. In the second part, MEC + AD reactor was operated under different voltage applications (0.3, 0.6, and 1.0 V) and organic loading rates. MEC + AD system exhibited 28–52% better biogas production performances (2.03 L/L/d; CH 4 :75.5% vs 1.43 L/L/d; CH 4 : 70.4%) compared to control reactor in all sets due to voltage application. In the second part, biogas productions of MEC + AD reactor changed between 3.08 L/L/d and 5.13 L/L/d (75–77.8% CH 4 ) depending on the organic loading rates and applied voltages. Higher voltages (0.6 and 1.0 V) showed better methane production performances especially at high OLRs with respect to lower voltages. Consequently, MEC + AD reactor could be operated efficiently at extreme operational conditions (HRT of 2 days and OLR of 30 g VS/L/d) that conventional anaerobic reactors can not be operated.
René Alejandro Flores-Estrella, Victor Alcaraz-Gonzalez, Andreas Haarstrick
Energies · 2022
The aim of this work is to propose a methodology to obtain an effectiveness factor for biofilm in a microbial electrolysis cell (MEC) system and use it to reduce a partial differential equation (PDE) biofilm MEC model to an ordinary differential equation (ODE) MEC model. The biofilm mass balances of the different species are considered. In addition, it is considered that all the involved microorganisms are attached to the anodic biological film. Three effectiveness factors are obtained from partial differential equations describing the spatial distributions of potential and substrate in the biofilm. Then, a model reduction is carried out using the global mass balances of the different species in the system. The reduced model with three uncertain but bounded effectiveness factors is evaluated numerically and analyzed in the sense of stability and parametric sensibility to demonstrate its applicability. The reduced ODE model is compared with a validated model taken from the literature, and the results are in good agreement. The biofilm effectiveness factor in MEC systems can be extended to the reduction of PDE models to obtain ODE models that are commonly used in optimization and control problems.
Bachira Abada, Amina Saidi
Journal of Renewable Energies · 2024
This study focuses on micro-electrochemical screening to select microbial strains capable of directly transfer electrons to the working electrode dependent on specific enzymatic machinery. The main objective of this work is to select and identify promising strains for allow the bioelectrolysis production of hydrogen. To achieve this goal, microbial composites (artificial biofilms), have been developed using Escherichia coli CGE1 from LCPME. CNRS Fransh, Pseudomonas putrifisciens (CIP 69.13) (CIP, Collection Institut Pasteur, Fransh). Shewanella oneidensis MR-1 (ATCC 700550), and Thiobacillus denitrificans, from (ATCC, American Type Culture Collection), each one enclosed in a matrix carbon nanotubes and protamine matrix, forming an artificial biofilm on buckypaper. Cyclic Voltammetry (CV) measurements were performed over a potential range of +0.4 to -0.7V at 5mV/s under 30°C, using a saturated KCl Ag/AgCl reference electrode and a stainless-steel grid counter electrode. For E. coli and P. putrifisciens, the measurement focused on the oxidation of 20mM glucose, while the former bacteria were growth with and without O2. For S. oneidensis and T. denitrificans the focus was on the reduction of fumarate and 20 mM of NaNOH3+, respectively. As results, E. coli and P. putrifisciens species show no notable electrochemical activity, with no signal of glucose oxidation, due to the absence of type C cytochromes in the cytoplasmic membrane, unlike S. oneidensis and T. denitrificans, that demonstrate a direct electron transfer.
Bart De Gusseme, Maarten Soetaert, Tom Hennebel et al.
Microbial Biotechnology · 2012
Summary Diclofenac is one of the most commonly detected pharmaceuticals in wastewater treatment plant (WWTP) effluents and the receiving water bodies. In this study, biogenic Pd nanoparticles (‘bio‐Pd’) were successfully applied in a microbial electrolysis cell (MEC) for the catalytic reduction of diclofenac. Hydrogen gas was produced in the cathodic compartment, and consumed as a hydrogen donor by the bio‐Pd on the graphite electrodes. In this way, complete dechlorination of 1 mg diclofenac l −1 was achieved during batch recirculation experiments, whereas no significant removal was observed in the absence of the biocatalyst. The complete dechlorination of diclofenac was demonstrated by the concomitant production of 2‐anilinophenylacetate (APA). Through the addition of −0.8 V to the circuit, continuous and complete removal of diclofenac was achieved in synthetic medium at a minimal HRT of 2 h. Continuous treatment of hospital WWTP effluent containing 1.28 µg diclofenac l −1 resulted in a lower removal efficiency of 57%, which can probably be attributed to the affinity of other environmental constituents for the bio‐Pd catalyst. Nevertheless, reductive catalysis coupled to sustainable hydrogen production in a MEC offers potential to lower the release of micropollutants from point‐sources such as hospital WWTPs.
Gerasimos Kanellos, Asimina Tremouli, Georgios Arvanitakis et al.
Preprints.org · 2023
This study deals with the computational analysis of the kinetic processes of a microbial electrolysis cell assisted-anaerobic digestion (MEC-AD) treating raw-waste activated sludge (WAS), comparatively with a conventional AD, as well as the effect of the Organic Loading Rate (OLR) on the system’s performance. The aim was to derive a single kinetic and mathematical model for the study of the MEC-AD, using the ADM1 framework, which can be utilized to extract the effect of an applied potential on the kinetics of AD. The experimental data were obtained from the long-term, continuous operation of two identical reactors (an AD and a MEC-AD), which were operated at different OLRs (1.1, 1.7 and 2.9 gCOD/(L*d)). The results showed that the MEC-AD yielded improved biomass yields, substrate consumption kinetics and 1st order disintegration kinetics, with a predominant contribution to disintegration of complex particulates, comparatively with the AD. Moreover, it enabled operation at higher OLRs (achieving the highest divergence from the AD at the OLR of 4.14 gCOD/(L*d)), therefore accelerating sludge treatment, as well as an improved performance at an increased solids retention time (SRT). These findings can serve as a quantitative guide for the effects of the operating parameters on the raw-WAS-fed MEC-AD performance.
Bu Qing, Md Tabish Noori, Booki Min
Research Square · 2024
Abstract Microbial electrolysis cells (MEC) can produce hydrogen (H 2 ) at a low energy expense, but H 2 production rate is often limited by poor microbe-electrode interaction. This study aimed to enhance the interaction of microbes with a cathode electrode modified with an iron-sulfide (FeS) catalyst in MECs to achieve an efficient hydrogen evolution reaction (HER) and to optimize performance at different substrate concentrations, ranging from 1 g/L to 3 g/L of glucose. The electrochemical analysis revealed FeS a highly active catalyst for HER, surpassing the performance of a 10% platinum (Pt-C)-modified cathode. At 2g/L glucose, MECs with a FeS-modified cathode (MEC-FeS) produced hydrogen at the highest yield of 7.01 mol H 2 /mol glucose, and the hydrogen production rate was 1.96 ± 0.09 m 3 /m 3 •d. The control operations of MEC with a pristine cathode and dark fermentation resulted in a reduced hydrogen yield of 5.83 ± 0.25 mol H 2 /mol glucose and 2.12 ± 0.1 mol H 2 /mol glucose, respectively. Moreover, the MEC-FeS achieved a high energy efficiency of 78 ± 5% when compared to the MEC without catalyst (60 ± 5%) and the dark fermentation (24 ± 1%). This study suggests that the utilization of FeS as a cathode catalyst in MECs can ensure high-rate hydrogen generation with optimal substrate concentration, paving the way for efficient upscaling and field application.
Cong Wang, Dongdong Chang, Qi Zhang et al.
Research Square · 2023
Abstract Lignocellulose pretreated by pyrolysis can be transformed into clean energy (such as bioethanol) via microbial fermentation, which is significant for waste recycling, environmental protection, and energy security. However, acids, aldehydes, and phenols present in the bio-oil exert inhibitory effects on microorganisms, which challenges the downstream utilization and conversion of lignocellulosic pyrolysate. In this study, we constructed a microbial electrolysis cell system for bio-oil detoxification and efficient ethanol production (C 2 H 5 O) using evolved Escherichia coli . In the bio-oil media with electricity, E. coli -H exhibited significant levoglucosan consumption and ethanol production abilities compared to the control. Finally, 0.54 g ethanol/g levoglucosan was produced by E. coli -H in the undetoxified bio-oil media with 1.0%(w/v) levoglucosan, reaching 95% of the theoretical yield. This design aimed to solve bioethanol production and utilization challenges, as evident in related studies. This research provides a practical method for bioethanol production from lignocellulosic substrates and a scientific basis and technical demonstration for its industrialized application.
Wei Yang, Yi Peng, Yudong Zhang et al.
ACS Sustainable Chemistry & Engineering · 2019
Microbial fuel cell (MFC) has been attracting extensive interest, because it can be used for electricity generation and concurrently wastewater treatment. Yet, the MFC performance has remained limi...
Ravinder Kumar, L. Singh, A. Zularisam et al.
International Journal of Energy Research · 2018
Microbial fuel cells (MFCs) are emerging as a versatile renewable energy technology. This is particularly because of the multidimensional applications of this eco‐friendly technology. The technology depends on the electroactive bacteria, popularly known as exoelectrogens, to simultaneously produce electric power and treat wastewater. Electrode modifications with nanomaterials such as gold nanoparticles and iron oxide nanoparticles or pretreatment methods such as sonication and autoclave sterilization have shown promising results in enhancing MFC performance for electricity generation and wastewater treatment. The MFC technology has been also investigated for the removal of various heavy metals and toxic elements, and to detect the presence of toxic elements in wastewater. In addition, the MFCs can be modified into microbial electrolysis cells to generate hydrogen energy from various organic matters. This article provides a comprehensive and state‐of‐the‐art review of possible applications of the MFC technology. This also points out the various challenges that limit MFC performance. Finally, this article identifies the strategies to improve MFC performance for different applications. Copyright © 2017 John Wiley & Sons, Ltd.
M. I. Din, M. Iqbal, Zaib Hussain et al.
Energy Sources, Part A: Recovery, Utilization, and Environmental Effects · 2020
A microbial fuel cell is an efficient, cost-effective, and green methodology for electricity production and wastewater treatment. A single chambered microbial fuel cell (SCMFC) was designed to gene...
Loubna Ezziat, A. Elabed, S. Ibnsouda et al.
Frontiers in Energy Research · 2019
Being constituents of the effluents of many industries, heavy metals cause severe environmental pollution due to their recalcitrance and persistence in the environment. Conventional remediation strategies used to treat heavy metals loaded wastewater are neither economical nor environmentally friendly. To overcome these challenges, the rise of a new process that combines energy conservation and recovery was mandatory. Microbial fuel cells have been recognized as an emerging technology to mitigate environmental pollution; it provides a solution to wastewater treatment and the removal and/or recovery of heavy metals. Microbial fuel cells can be defined as bioelectrochemical systems that utilize the catalytic activity of microorganisms organized in biofilms to oxidize organic or inorganic compounds by producing electric current thus providing a new opportunity for sustainable energy production and bioremediation. The removal of metals, such as chromium, vanadium, arsenic, copper, silver and gold has been studied using both single and double chambered MFCs. The fact that some heavy metals have high redox potential makes it possible to utilize them as effective electron acceptors instead of oxygen in the cathodic chamber of microbial fuel cells. Biotic/Abiotic cathode chambers can not only remove but also recover heavy metals. However, a number of challenges such us: low production rates and limited efficiencies make the application of this technology restricted to lab scale only. In this chapter, we review the treatment of metal-containing effluents using microbial fuel cells. We’ll first summarize the principle of metal removal/recovery in microbial fuel cells, and then provide an overview of literature that attempted to treat metal loaded effluents in both single and double chambered microbial fuel cells while discussing power output, heavy metal removal efficiency and mechanisms involved in the process. Furthermore, the primary challenges and opportunities for scaling-up of microbial fuel cells and their future applications in the treatment of heavy metals contaminated wastewater will be outlined.
Sami G. A. Flimban, I. M. Ismail, Taeyoung Kim et al.
Energies · 2019
Microbial fuel cell (MFC) technology offers an alternative means for producing energy from waste products. In this review, several characteristics of MFC technology that make it revolutionary will be highlighted. First, a brief history presents how bioelectrochemical systems have advanced, ultimately describing the development of microbial fuel cells. Second, the focus is shifted to the attributes that enable MFCs to work efficiently. Next, follows the design of various MFC systems in use including their components and how they are assembled, along with an explanation of how they work. Finally, microbial fuel cell designs and types of main configurations used are presented along with the scalability of the technology for proper application. The present review shows importance of design and elements to reduce energy loss for scaling up the MFC system including the type of electrode, shape of the single reactor, electrical connection method, stack direction, and modulation. These aspects precede making economically applicable large-scale MFCs (over 1 m3 scale) a reality.
I. Das, M. Ghangrekar, R. Satyakam et al.
Journal of Hazardous, Toxic, and Radioactive Waste · 2020
Abstract Scaling up of a microbial fuel cell (MFC) is a challenging task and researchers are still struggling to achieve acceptable results when treating real wastewater at the field scale. In this...
W. Tan, Siewhui Chong, Hsu-Wei Fang et al.
Processes · 2021
Microbial fuel cell (MFC) technology has attracted a great amount of attention due to its potential for organic and inorganic waste treatment concomitant with power generation. It is thus seen as a clean energy alternative. Modifications and innovations have been conducted on standalone and hybrid/coupled MFC systems to improve the power output to meet the end goal, namely, commercialization and implementation into existing wastewater treatment plants. As the energy generated is inversely proportional to the size of the reactor, the stacking method has been proven to boost the power output from MFC. In recent years, stacked or scale-up MFCs have also been used as a power source to provide off-grid energy, as well as for in situ assessments. These scale-up studies, however, encountered various challenges, such as cell voltage reversal. This review paper explores recent scale-up studies, identifies trends and challenges, and provides a framework for current and future research.
Jamile Mohammadi Moradian, Zhen Fang, Yang‐Chun Yong
Bioresources and Bioprocessing · 2021
Biomass is one of the most abundant renewable energy resources on the earth, which is also considered as one of the most promising alternatives to traditional fuel energy. In recent years, microbial fuel cell (MFC) which can directly convert the chemical energy from organic compounds into electric energy has been developed. By using MFC, biomass energy could be directly harvested with the form of electricity, the most convenient, wide-spread, and clean energy. Therefore, MFC was considered as another promising way to harness the sustainable energies in biomass and added new dimension to the biomass energy industry. In this review, the pretreatment methods for biomass towards electricity harvesting with MFC, and the microorganisms utilized in biomass-fueled MFC were summarized. Further, strategies for improving the performance of biomass-fueled MFC as well as future perspectives were highlighted.
Hridoy Roy, T. Rahman, Nishat Tasnim et al.
Membranes · 2023
A microbial fuel cell (MFC) is a system that can generate electricity by harnessing microorganisms’ metabolic activity. MFCs can be used in wastewater treatment plants since they can convert the organic matter in wastewater into electricity while also removing pollutants. The microorganisms in the anode electrode oxidize the organic matter, breaking down pollutants and generating electrons that flow through an electrical circuit to the cathode compartment. This process also generates clean water as a byproduct, which can be reused or released back into the environment. MFCs offer a more energy-efficient alternative to traditional wastewater treatment plants, as they can generate electricity from the organic matter in wastewater, offsetting the energy needs of the treatment plants. The energy requirements of conventional wastewater treatment plants can add to the overall cost of the treatment process and contribute to greenhouse gas emissions. MFCs in wastewater treatment plants can increase sustainability in wastewater treatment processes by increasing energy efficiency and reducing operational cost and greenhouse gas emissions. However, the build-up to the commercial-scale still needs a lot of study, as MFC research is still in its early stages. This study thoroughly describes the principles underlying MFCs, including their fundamental structure and types, construction materials and membrane, working mechanism, and significant process elements influencing their effectiveness in the workplace. The application of this technology in sustainable wastewater treatment, as well as the challenges involved in its widespread adoption, are discussed in this study.
M. Azizul Moqsud
Revolutionizing Energy Conversion - Photoelectrochemical Technologies and Their Role in Sustainability · 2024
Living plants can generate electricity with the help of the microbial fuel cell. This is a sustainable way to generate electricity as there is no chance of environmental pollution. In this chapter, plant microbial fuel cells will be discussed thoroughly including their design and mechanism for sustainable power generation through plant microbial fuel cells. This plant microbial fuel cell can provide the necessary bioenergy and the potential food supply at the same time. If we could get green energy and food together, then it would certainly increase the chance of the probable supply of the two important demands of the world, which are shortages of green energy and food for humanity.
Gakai Peter Kingori
Preprints.org · 2025
Microbial fuel cells (MFCs) are promising technologies for generating bioelectricity from organic waste through microbial catalysis. However, the high cost of membranes used in MFCs remains one of the major concerns limiting their widespread application. In this study, a low-cost and readily available bio-membrane fabricated from onion skin was developed and applied as the membrane component in MFCs. By using Shewanella oneidensis MR-1 as the model exoeletrogen, the onion skin membrane equipped MFC delivered even higher bioelectricity output (~133 mW/m2) compared to that equipped with the costly Nafion membrane (~74 mW/m2). This research demostrated that it is possible to use onion membrane as a cost-effective alternative to Nafion membrane for bioelectrochemical systems.
Rizki Deva Maharani
· 2019
Pengembangan fuel cell yaitu sel elektrokimia berbasis mikroba atau Microbial Fuel Cell (MFC) berbahan bakar hidrogen murni. Microbial Fuel Cell (MFC) adalah bioreaktor pengubah energi kimia senyawa organik menjadi energi listrik pada kondisi anaerob dengan reaksi katalitik mikroorganisme untuk dihasilkan tegangan dan arus listrik. Reaktor MFC dibuat dengan bentuk dua chamber yang keduanya dihubungkan dengan jembatan garam. Jembatan garam difungsikan sebagai jalan pada proses transfer elektron. Kompartemen anoda menghasilkan arus listrik yang menjadi penetrasi dalam membran plasma yang kemudian terjadi transfer elektron mikroorganisme dan membawa elektron ke permukaan elektroda. Materi organik yang digunakan adalah air buangan yang mengandung mikroba, karena mikroba sebagai sumber enegi utama untuk mereduksi energi yang nantinya menghasilkan sel bahan bakar. Hal ini menjadi energi alternatif sekaligus penanggulangan air buangan Jenis air buangan yang dapat digunakan sebagai substrat mikroba pada sistem MFC bisa berasal dari limah industri maupun limbah domestik.
Rahsaan Simon
· 2024
As renewable-energy technologies are garnering much attention due to the necessary mitigation of climate change, the requirement for a fuel cell utilizing a clean source of dihydrogen input appears to be of the utmost importance. The following work hypothesizes a hybrid fuel cell utilizing both microbial and technological means for clean in-situ hydrogen production and subsequent energy production at potentially higher rates than standardized microbial fuel cells and with a negative carbon footprint.
Dominic Gervasio, J. Parker Evans, Barry Pryor
Preprints.org · 2020
The construction of optimized biological fuel cells requires a cathode which combines the longevity of a microbial catalyst with the power density of an enzymatic catalyst. Laccase secreting fungi were grown directly on the cathode of a biological fuel cell to facilitate the exchange of inactive enzymes with active enzymes with the goal of extending the lifetime of laccase cathodes. Additionally, a functionally graded coating was developed to increase enzyme loading at the cathode. Directly incorporating the laccase producing fungus at the cathode extends the operational lifetime of laccase cathodes while eliminating the need for frequent replenishment of the electrolyte. Additionally, the hybrid microbial-enzymatic cathode addresses the issue of enzyme inactivation by using the natural ability of fungi to exchange inactive laccases at the cathode with active laccases. Finally, enzyme adsorption was increased through the use of a functionally graded coating containing an optimized ratio of titanium dioxide nanoparticles and single walled carbon nanotubes. The hybrid microbial-enzymatic fuel cell combines the higher power density of enzymatic fuel cells with the longevity of microbial fuel cells and demonstrates the feasibility of a self-regenerating fuel cell in which inactive laccases are continuously exchanged with active laccases.
Li Zhao, Jacob Brouwer, John Naviaux et al.
ASME 2014 12th International Conference on Fuel Cell Science, Engineering and Technology · 2014
Microbial fuel cells (MFCs) are promising for simultaneous treatment of wastewater and energy production. In this study, a mathematical model for microbial fuel cells with air cathodes was developed and demonstrated by integrating biochemical reactions, Butler–Volmer expressions and mass/charge balances. The model developed is focused on describing and understanding the steady-state polarization curves of the microbial fuel cells with various levels and methods of anode-biofilm growth with air cathodes. This polarization model combines enzyme kinetics and electrochemical kinetics, and is able to describe measured polarization curves for microbial fuel cells with different anode-biofilm growth. The MFC model developed has been verified with the experimental data collected. The simulation results provide insights into the limiting physical, chemical and electrochemical phenomena and their effects on cell performance. For example, the current MFC data demonstrated performance primarily limited by cathode electrochemical kinetics.
Luke T. Wagner, Niloofar Hashemi, Nastaran Hashemi
ASME 2013 11th International Conference on Fuel Cell Science, Engineering and Technology · 2013
Microbial fuel cells (MFCs) have been a potential green energy source for a long time but one of the problems is that either the technology must be used on a large scale or special equipment have been necessary to keep the fuel cells running such as syringe pumps. Paper-based microbial fuel cells do not need to have a syringe pump to run and can run entirely by themselves when placed in contact with the fluids that are necessary for it to run. Paper-based microbial fuel cells are also more compact than traditional MFCs since the device doesn’t need any external equipment to run. The goal of this paper is to develop a microbial fuel cell that does not require a syringe pump to function. This is done by layering chromatography paper with wax design printed onto it. This restricts the fluids to a specific flow path allowing it to act like the tubes in a typical microbial fuel cell device by delivering the fluids to the chamber. The fluids are picked up by tabs that sit in the fluid and use capillary attraction to flow up the tab and into the device. The fluids are directed to the chambers where the chemical and biological processes take place. These flows are then directed out of the device so that they are taken to a waste container and out of the system. Our microliter scale paper-based microbial fuel cell creates a significant current that is sustained for a period of time and can be repeated. A paper-based microbial fuel cell also has a fast response time. These results mean that it could be possible for a set of paper-based microbial fuel cells to create a power density capable of powering small, low power circuits when used in series or parallel. In this paper, we discuss the fabrication and experimental results of our paper-based microbial fuel cell. Also there will be a discussion of how paper-based microbial fuels cells compare to the traditional microbial fuel cells and how they could be used in the future.
Ransford Kingsley Asiedu, Rejoice Ayeley Ayi, Gilbert Blah Quarshie et al.
bioRxiv (Cold Spring Harbor Laboratory) · 2025
Abstract Hydrogen, a source of renewable energy, unfortunately relies largely on fossil fuel technologies for its production. However, recent studies have shown that microbial technologies could be used to facilitate green hydrogen production. Based on these findings, this work primarily focused on utilizing farm soil, wastewater, anaerobic sludge and cow dung for the production of green hydrogen. A double chambered Microbial Electrolysis Cell (MEC) was coupled with a single chambered Microbial Fuel Cell (MFC) for this work. In this experiment, the fuel cell produced an average potential difference of 118.9 ± 0.001 mV over a period of 312 hours (13 days). The electrolysis cell also produced an average potential difference of 56.8 ± 0.003 mV over the same period of time. The two chambers of the MEC which facilitated the electrolysis process were separated by a locally made Proton Exchange Membrane. Hydrogen gas was produced at an average rate of about 6.9 ± 0.012 mL/day with the highest being 65.5 ± 0.012 mL on day 9. Also, an average current of 0.22 ± 0.006 μA flowed through the entire system and the total amount of hydrogen gas produced at the end of the experiment was approximately 96.8 ± 0.012 mL . Based on this work, it is evident that green hydrogen can be produced by means of coupling microbial electrolysis cells with microbial fuel cells and utilizing farm soil, wastewater, anaerobic sludge and cow dung.
Dang Dinh Nguyen, Muhammad Tanveer, Hang‐Nga Mai et al.
Fuel · 2023
Dang Dinh Nguyen, Thinh Pham, Muhammad Tanveer et al.
Bioresource Technology · 2022
A deep learning-based method for optimizing a membraneless microfluidic fuel cell (MMFC)performance by combining the artificial neural network (ANN) and genetic algorithm (GA) was for the first time introduced. A three-dimensional multiphysics model that had an accuracy equivalent to experimental results (R 2  = 0.976) was employed to generate the ANN's training data. The constructed ANN is equivalent to the simulation (R 2  = 0.999) but with far better computation resource efficiency as the ANN's execution time is only 0.041 s. The ANN model is then used by the GA to determine the inputs (microchannel length = 10.040 mm, width = 0.501 mm, height = 0.635 mm; temperature = 288.210 K, cell voltage = 0.309 V) that lead to the maximum power density of 0.263 mWcm -2 (current density of 0.852 mAcm -2 ) of the MMFC. The ANN-GA and numerically calculated maximum power densities differed only by 0.766%.
Heming Wang, Jae-Do Park, Zhiyong Jason Ren
Environmental Science & Technology · 2015
The microbial fuel cell (MFC) technology offers sustainable solutions for distributed power systems and energy positive wastewater treatment, but the generation of practically usable power from MFCs remains a major challenge for system scale up and application. Commonly used external resistors will not harvest any usable energy, so energy-harvesting circuits are needed for real world applications. This review summarizes, explains, and discusses the different energy harvesting methods, components, and systems that can extract and condition the MFC energy for direct utilization. This study aims to assist environmental scientists and engineers to gain fundamental understandings of these electronic systems and algorithms, and it also offers research directions and insights on how to overcome the barriers, so the technology can be further advanced and applied in larger scale.
Alejandro A. Dos‐Reis‐Delgado, Andrea Carmona‐Dominguez, Gerardo Sosa‐Avalos et al.
ELECTROPHORESIS · 2022
Abstract Temperature is a critical—yet sometimes overlooked—parameter in microfluidics. Microfluidic devices can experience heating inside their channels during operation due to underlying physicochemical phenomena occurring therein. Such heating, whether required or not, must be monitored to ensure adequate device operation. Therefore, different techniques have been developed to measure and control temperature in microfluidic devices. In this contribution, the operating principles and applications of these techniques are reviewed. Temperature‐monitoring instruments revised herein include thermocouples, thermistors, and custom‐built temperature sensors. Of these, thermocouples exhibit the widest operating range; thermistors feature the highest accuracy; and custom‐built temperature sensors demonstrate the best transduction. On the other hand, temperature control methods can be classified as external‐ or integrated‐methods. Within the external methods, microheaters are shown to be the most adequate when working with biological samples, whereas Peltier elements are most useful in applications that require the development of temperature gradients. In contrast, integrated methods are based on chemical and physical properties, structural arrangements, which are characterized by their low fabrication cost and a wide range of applications. The potential integration of these platforms with the Internet of Things technology is discussed as a potential new trend in the field.
Fanwei Kong, Liang Yuan, Yuan F. Zheng et al.
SLAS Technology · 2012
Milad Abolhasani, Eugenia Kumacheva
Nature Synthesis · 2023
Bruce E. Logan
Nature Reviews Microbiology · 2009
KeChrist Obileke, Helen Onyeaka, Edson L. Meyer et al.
Electrochemistry Communications · 2021
Mirella Di Lorenzo, Alexander R. Thomson, K.J. Schneider et al.
Biosensors and Bioelectronics · 2014
Eric R. Choban
Journal of Power Sources · 2004
Cristian Picioreanu, Florian Blauert, Harald Horn et al.
Water Research · 2018
The advantage of using non-invasive imaging such as optical coherence tomography (OCT) to asses material properties from deformed biofilm geometries can be compromised by the assumptions made on fluid forces acting on the biofilm. This study developed a method for the determination of elastic properties of biofilms by modelling the biofilm deformation recorded by OCT imaging with poroelastic fluid-structure interaction computations. Two-dimensional biofilm geometries were extracted from OCT scans of non-deformed and deformed structures as a result of hydrodynamic loading. The biofilm geometries were implemented in a model coupling fluid dynamics with elastic solid mechanics and Darcy flow in the biofilm. The simulation results were compared with real deformed geometries and a fitting procedure allowed estimation of the Young's modulus in given flow conditions. The present method considerably improves the estimation of elastic moduli of biofilms grown in mini-fluidic rectangular channels. This superior prediction is based on the relaxation of several simplifying assumptions made in past studies: shear stress is not anymore taken constant over the biofilm surface, total stress including also pressure is accounted for, any biofilm shape can be used in the determinations, and non-linear behavior of mechanical properties can be estimated. Biofilm elastic moduli between 70 and 700 Pa were obtained and biofilm hardening at large applied stress due to increasing flow velocity was quantified. The work performed here opens the way for in-situ determination of other mechanical properties (e.g., viscoelastic properties, relaxation times, plastic yields) and provides data for modelling biofilm deformation and detachment with eventual applications in biofilm control and removal strategies.