Forschungsdaten – Titel und Zusammenfassungen von Publikationen, extrahierte Daten und Katalogeinträge – erscheinen in ihrer Originalsprache Englisch.
Publikation · MFC
Development of Electroactive and Anaerobic Ammonium-Oxidizing (Anammox) Biofilms from Digestate in Microbial Fuel Cells
Zusammenfassung
Was die Publikation berichtet, in ihren eigenen Worten.
Zusammenfassung
Microbial Fuel cells (MFCs) have been proposed for nutrient removal and energy recovery from different wastes. In this study the anaerobic digestate was used to feed H-type MFC reactors, one with a graphite anode preconditioned with Geobacter sulfurreducens and the other with an unconditioned graphite anode. The data demonstrate that the digestate acts as a carbon source, and even in the absence of anode preconditioning, electroactive bacteria colonise the anodic chamber, producing a maximum power density of 172.2 mW/m². The carbon content was also reduced by up to 60%, while anaerobic ammonium oxidation (anammox) bacteria, which were found in the anodic compartment of the reactors, contributed to nitrogen removal from the digestate. Overall, these results demonstrate that MFCs can be used to recover anammox bacteria from natural sources, and it may represent a promising bioremediation unit in anaerobic digestor plants for the simultaneous nitrogen removal and electricity generation using digestate as substrate.
KI-Zusammenfassung
78 % KonfidenzThis study demonstrates that H-type MFCs fed with anaerobic digestate can simultaneously generate electricity and remove nitrogen through the spontaneous establishment of electroactive and anammox bacteria. Two reactors—one with a sterile anode (MFC-U) and one pre-colonized with Geobacter sulfurreducens (MFC-C)—achieved comparable power densities (172.2 and 240 mW/m² respectively) and removed 32–40% of total Kjeldahl nitrogen (TKN) while reducing COD by 60–68%. Molecular analysis confirmed anammox bacteria colonization in the anode biofilm. The work suggests MFCs can recover slow-growing anammox organisms from natural sources without external enrichment, though the nitrogen removal mechanism remains incompletely characterized.
Zentrale Erkenntnisse
Leistung Unconditioned digestate-derived biofilms achieved 172.2 mW/m² power density, only 28% lower than G. sulfurreducens-preconditioned anodes at 240 mW/m², despite a 3-week delayed start-up.
Was heißt das. Preconditioning with pure cultures may not be necessary for digestate-fed MFCs; natural inoculation can achieve comparable performance if start-up delay is acceptable.
Mechanismus Coulombic efficiency was low (15.6–19.6%) despite zero methane production and negligible nitrate/nitrite accumulation, suggesting anaerobic ammonia oxidation rather than direct ammonia-to-electricity conversion.
Was heißt das. Low CE in digestate-fed MFCs should not be interpreted as poor performance; it reflects substrate partitioning to anammox and other non-electrogenic pathways, not methanogenesis or diffusion losses.
Mechanismus Anammox bacteria were enriched in the anode biofilm (detected by 16S rRNA and nitrite reductase gene PCR) despite anaerobic conditions and no external enrichment culture, indicating the MFC anode selects for these slow-growing organisms.
Was heißt das. MFC anodes may serve as passive enrichment reactors for anammox; test whether anode potential or biofilm age accelerates anammox establishment compared to conventional enrichment.
Mechanismus Biofilm thickness was similar (66–141 μm) in both reactors, but MFC-C showed uniform multilayered structure while MFC-U showed composite morphology with surface-localized bacteria and entrapped sediments.
Was heißt das. Biofilm architecture differs by inoculum source; digestate-derived biofilms may require longer maturation or different anode materials to achieve the ordered structure of pure-culture biofilms.
Leistung Live bacteria comprised ~30% of biofilm depth in both reactors, concentrated in the outer 0–3 μm layer, yet current generation remained comparable to prior studies using carbon cloth anodes.
Was heißt das. Dead cell layers do not significantly impede electron transfer in digestate-fed MFCs; focus optimization on outer biofilm activity rather than bulk viability.
Ansatzpunkte6
Konkrete Lücken in dieser Publikation, jeweils mit einem Experiment, das sie schließen würde.
Hoch No measurement of anode or cathode potential (vs. Ag/AgCl or SHE); operating window for anammox enrichment and nitrogen removal is unknown.
Section 2.2 states 'fixed external resistance, Rext, of 180 Ω' but does not report actual anode or cathode potentials. Polarization curves (Figure 3) show voltage and current but not electrode potentials. Anammox bacteria have known redox preferences; without potential data, the electrochemical conditions driving their enrichment cannot be replicated or optimized.
Versuch. Measure anode and cathode potential (vs. Ag/AgCl) throughout batch cycles; vary anode potential (−0.2 to +0.2 V) and quantify anammox 16S rRNA gene abundance and nitrogen removal rate.
Hoch No dissolved oxygen (DO) measurement in the anode chamber during operation; anaerobic conditions assumed but not verified.
Section 2.4 lists DO measurement capability ('dissolved oxygen was measured with a 913 OXY oximeter') but Section 3.3 only states 'dissolved oxygen in the anodic chambers was always lower than 0.05 mg/L' without time-series data or sampling frequency. Anammox requires strict anaerobiosis; DO leakage would shift nitrogen removal toward nitrification-denitrification.
Versuch. Log DO continuously in anode chamber; correlate with anammox gene abundance and nitrite/nitrate accumulation; test membrane integrity and N2 flushing frequency.
Hoch No measurement of nitrite (NO2−) or nitrate (NO3−) accumulation in the anode chamber; only stated as 'negligible' at cycle end.
Section 3.3 states 'nitrates and nitrites at the end of each cycle were negligible in the anodic and cathodic chambers' but provides no time-series data, detection limits, or quantitative values. Anammox consumes NO2− and produces N2; transient NO2− accumulation would confirm anammox activity but is not tracked.
Versuch. Measure NO2− and NO3− daily by ion chromatography (method already available, Section 2.4); plot against TKN removal and anammox gene expression; test whether NO2− limitation constrains nitrogen removal.
Mittel No variation in C/N ratio or HRT; single digestate dilution (1:10) and weekly feeding tested.
Section 2.1 and 2.2 describe a fixed feed composition (1:10 digestate dilution, weekly replacement of 150 mL of 200 mL anode volume, ~7-day HRT). No exploration of how C/N ratio or residence time affects anammox enrichment or nitrogen removal efficiency. Anammox typically requires low C/N and long HRT.
Versuch. Test digestate dilutions (1:5, 1:10, 1:20) and feeding intervals (3, 7, 14 days); measure TKN removal, anammox gene copy number, and power output.
Mittel No measurement of N2O or N2 gas production; nitrogen balance incomplete.
Section 3.3 states 'we did not detect CH4 production' but does not report N2O or N2 measurement. Anammox produces N2; denitrification can produce N2O. Without gas chromatography or isotope tracing, the fate of 32–40% removed TKN is unknown—it could be biomass incorporation, N2 loss, or N2O accumulation.
Versuch. Measure headspace N2O by GC-ECD and N2 by GC-TCD or isotope-labeled 15N tracing; quantify nitrogen balance and confirm anammox stoichiometry (NH4+ + NO2− → N2 + 2H2O).
Mittel No catholyte pH control or monitoring; neutral pH assumed but not reported.
Section 2.2 states cathode filled with 'potassium phosphate buffer (100 mM pH 7.5)' but no pH time-series or post-operation pH reported. Cathode pH can drift due to proton consumption during reduction; anammox in cathode chamber (if any) would be pH-sensitive.
Versuch. Monitor cathode pH continuously; test pH range (6.5–8.5) and measure anammox activity and nitrogen removal in cathode chamber if applicable.
Erstellt von der MESSAI-Extraktionspipeline · mit dem Quell-PDF abgleichen
Extrahierte Werte
Jeder aus der Publikation entnommene Wert mit seiner Quelle, damit sich jede Zahl am Text prüfen lässt.
n = 20 extrahierte Werte
Wählen Sie eine Quellenangabe, um Zitat, Seite und Konfidenz hinter einem Wert zu sehen.
11 von 20 extrahierten Zeilen modellierbar
- 2 nicht kanonisiert (kein kanonischer Slug)
- 4 kein SI-Wert
- 1 Verifizierer hat den Wert abgelehnt
- 2 Physikprüfung nicht bestanden
| Parameter | Wert | Einheit | Konfidenz | Quelle | Anmerkungen | Modellierbar |
|---|---|---|---|---|---|---|
| Biofilm Thickness | 66 | μm | 90 % | extrahiert | "Measurements of biofilm thickness showed that the biofilm ranged from 141 ± 30 μ…" · T=30°C, pH(an)=7.5, substrate=digestate-based medium (1:10 digestate to medium) | Modellierbar |
| Biofilm Thickness | 141 | μm | 90 % | extrahiert | "Measurements of biofilm thickness showed that the biofilm ranged from 141 ± 30 μ…" · T=30°C, pH(an)=7.5, substrate=digestate-based medium (1:10 digestate to medium) | Modellierbar |
| Power Density | 240 | mW/m² | 90 % | extrahiert | "The maximum power density per projected anode surface area was 170 mW/m2 for the…" · T=30°C, pH(an)=7.5, substrate=digestate-based medium (1:10 digestate to medium) | Ausgeschlossen: Physikprüfung nicht bestanden |
| Current Density | 992 | mA/m² | 90 % | extrahiert | "and 992 mA/m2 for the MFC-C" · T=30°C, pH(an)=7.5, substrate=digestate-based medium (1:10 digestate to medium) | Ausgeschlossen: Physikprüfung nicht bestanden |
| Power Density | 172 | mW/m² | 90 % | extrahiert | "similarly MFC-U reached a maximum power transfer of 0.4 mW (i.e., 172.2 mW/m2) a…" · T=30°C, pH(an)=7.5, substrate=digestate-based medium (1:10 digestate to medium) | Modellierbar |
| Internal Resistance | 300 | ohm | 90 % | extrahiert | "The maximum power generation reached a peak value of 0.60 mW for the MFC-C and 0…" · T=30°C, pH(an)=7.5, substrate=digestate-based medium (1:10 digestate to medium) | Modellierbar |
| Coulombic efficiency | 19,6 | % | 90 % | extrahiert | "MFC-U and MFC-C exhibited during days 35 and 42, a calculated CE of 15.6 and 19.…" · T=30°C, pH(an)=7.5, substrate=digestate-based medium (1:10 digestate to medium) | Modellierbar |
| Coulombic efficiency | 15,6 | % | 90 % | extrahiert | "MFC-U and MFC-C exhibited during days 35 and 42, a calculated CE of 15.6 and 19.…" · T=30°C, pH(an)=7.5, substrate=digestate-based medium (1:10 digestate to medium) | Modellierbar |
| Voltage at Maximum Power | 359 | mV | 90 % | extrahiert | "similarly MFC-U reached a maximum power transfer of 0.4 mW (i.e., 172.2 mW/m2) a…" · T=30°C, pH(an)=7.5, substrate=digestate-based medium (1:10 digestate to medium) | Ausgeschlossen: nicht kanonisiert (kein kanonischer Slug) |
| Power Density | 170 | mW/m² | 90 % | extrahiert | "The maximum power density per projected anode surface area was 170 mW/m2 for the…" · T=30°C, pH(an)=7.5, substrate=digestate-based medium (1:10 digestate to medium) | Modellierbar |
| Internal Resistance | 200 | ohm | 90 % | extrahiert | "The maximum power generation reached a peak value of 0.60 mW for the MFC-C and 0…" · T=30°C, pH(an)=7.5, substrate=digestate-based medium (1:10 digestate to medium) | Modellierbar |
| Voltage at Maximum Power | 347 | mV | 90 % | extrahiert | "after the start-up period MFC-C reached a reproducible maximum power (computed b…" · T=30°C, pH(an)=7.5, substrate=digestate-based medium (1:10 digestate to medium) | Ausgeschlossen: nicht kanonisiert (kein kanonischer Slug) |
| Power Density | 0,4 | mW | 90 % | extrahiert | "similarly MFC-U reached a maximum power transfer of 0.4 mW (i.e., 172.2 mW/m2) a…" · T=30°C, pH(an)=7.5, substrate=digestate-based medium (1:10 digestate to medium) | Ausgeschlossen: kein SI-Wert |
| Power Density | 0,6 | mW | 90 % | extrahiert | "after the start-up period MFC-C reached a reproducible maximum power (computed b…" · T=30°C, pH(an)=7.5, substrate=digestate-based medium (1:10 digestate to medium) | Ausgeschlossen: kein SI-Wert |
| Current Density | 1.300 | mA/m² | 90 % | extrahiert | "while the limiting current density recorded was 1304 mA/m2 for the MFC-U and 992…" · T=30°C, pH(an)=7.5, substrate=digestate-based medium (1:10 digestate to medium) | Modellierbar |
| Power Density | 240 | mW/m² | 90 % | extrahiert | "similarly MFC-U reached a maximum power transfer of 0.4 mW (i.e., 172.2 mW/m2) a…" · T=30°C, pH(an)=7.5, substrate=digestate-based medium (1:10 digestate to medium) | Ausgeschlossen: Verifizierer hat den Wert abgelehnt |
| Chemical Oxygen Demand (COD) Removal | 60 | % | 90 % | extrahiert | "The removal of the organic carbon by both reactors was quite efficient as demons…" · T=30°C, pH(an)=7.5, substrate=digestate-based medium (1:10 digestate to medium) | Modellierbar |
| Chemical Oxygen Demand (COD) Removal | 68 | % | 90 % | extrahiert | "The removal of the organic carbon by both reactors was quite efficient as demons…" · T=30°C, pH(an)=7.5, substrate=digestate-based medium (1:10 digestate to medium) | Modellierbar |
| TKN Removal | 32 | % | 90 % | extrahiert | "As regards to nitrogen TKN removals of about 40% and 32% in the MFC-C and MFC-U,…" · T=30°C, pH(an)=7.5, substrate=digestate-based medium (1:10 digestate to medium) | Ausgeschlossen: kein SI-Wert |
| TKN Removal | 40 | % | 90 % | extrahiert | "As regards to nitrogen TKN removals of about 40% and 32% in the MFC-C and MFC-U,…" · T=30°C, pH(an)=7.5, substrate=digestate-based medium (1:10 digestate to medium) | Ausgeschlossen: kein SI-Wert |
Methodik
Welches System und wie es betrieben wurde
Methodik
Methodology
H-type MFC reactors (250 mL each chamber) were operated in batch mode at 30°C with graphite electrodes, Nafion 117 proton exchange membrane, and fixed 180 Ω external resistance. One reactor (MFC-C) was pre-colonized with Geobacter sulfurreducens; the other (MFC-U) used a sterile anode. Both were fed weekly with 1:10 digestate dilution in synthetic medium. Electrochemical performance was measured by potentiostat (voltage, current, power); chemical analyses included COD (dichromate titration), TKN (Kjeldahl), and nitrite/nitrate (ion chromatography). Microbial community was characterized by 16S rRNA gene PCR, real-time qPCR for anammox abundance, and biofilm imaging (SEM, fluorescence microscopy with LIVE/DEAD staining).
Systemkonfiguration
| Feld | Wert |
|---|---|
| reactor type | MFC |
| chamber config | 2-chamber |
Betriebsbedingungen
1 Lauf extrahiert| Lauf | T°C | pHAnolyt | pHKatholyt | Substrat | [S]mg/L | HRTh | Modus | R_extΩ | V_appV | Inokulum |
|---|---|---|---|---|---|---|---|---|---|---|
| v2-de7f5e21c8c583d2 | 30 | 7.5 | — | digestate-based medium (1:10 digestate to medium) | — | — | — | 180 | — | — |
Extraktionspipeline
Rohextraktionen, Artefakte, Qualitätssignal
Extraktionsqualität
EhrlichkeitssignalBemessen Sie Ihr Vertrauen in die extrahierten Inhalte an diesen Signalen – so hat die Pipeline ihre eigene Ausgabe für diese Publikation bewertet.
KI-Konfidenz
78 %
Vom Modell selbst angegebene Konfidenz
Mittlere Parameterkonfidenz
90 %
Durchschnittliche Konfidenz der oben angezeigten PaperParameter-Zeilen
vor dem Zitieren mit dem Quell-PDF abgleichen · Werte 0–1
Diagramm-Explorer
Verändern Sie die Eingaben dieser Publikation und sehen Sie, wie sich das vorhergesagte Ergebnis verschiebt.
Modell erkunden
Der Reaktor in 3D, mit Strömung, die sich ein- und ausschalten lässt.
KI-Erkenntnisse
Widersprüche, Lücken und Chancen aus dem Vergleich dieser Publikation mit dem Korpus.
Ähnliche Publikationen vergleichen
Die nächsten Publikationen nach System, Materialien und Organismen, mit ihren Ergebnissen nebeneinander.
Quell-PDF
Die Publikation, wie sie erschienen ist.
Repräsentatives Modell, generisches MFC
Zum Interagieren tippenRepräsentatives Modell, generisches MFC
Repräsentatives Modell: MFC – zugeordnet nur anhand des Systemtyps der Publikation, nicht ihres Reaktors oder ihrer Geometrie.
In diesem Datensatz
Organismen, Parameter und Materialien, die diese Publikation berichtet. Jeder Eintrag verweist auf seine Seite.
Organismen · 1
Schlagwörter
- Digestate
- Microbial fuel cell
- Anammox
- Geobacter
- Geobacter sulfurreducens
- Anode
- Pulp and paper industry
- Chemistry
- Anaerobic digestion
- Energy source
- Anaerobic bacteria
- Environmental chemistry
- Environmental science
- Nitrogen
- Biofilm
- Bacteria
- Coal
- Methane
- Denitrification
- Biology
- Electrode
- Organic chemistry
Zitieren
Enea Gino Di Domenico, Gianluca Petroni, Daniele Mancini et al. (2015). Development of Electroactive and Anaerobic Ammonium-Oxidizing (Anammox) Biofilms from Digestate in Microbial Fuel Cells. BioMed Research International. https://doi.org/10.1155/2015/351014
- Zeitschrift
- BioMed Research International
Öffnen Sie das Modell im Labor, um alle Steuerelemente, die Parameterbearbeitung und Vorlagen-Overlays zu nutzen.
Im Labor öffnen