Forschungsdaten – Titel und Zusammenfassungen von Publikationen, extrahierte Daten und Katalogeinträge – erscheinen in ihrer Originalsprache Englisch.
Publikation · MES
Simplifying microbial electrosynthesis reactor design
Zusammenfassung
Was die Publikation berichtet, in ihren eigenen Worten.
Zusammenfassung
Microbial electrosynthesis, an artificial form of photosynthesis, can efficiently convert carbon dioxide into organic commodities; however, this process has only previously been demonstrated in reactors that have features likely to be a barrier to scale-up. Therefore, the possibility of simplifying reactor design by both eliminating potentiostatic control of the cathode and removing the membrane separating the anode and cathode was investigated with biofilms of Sporomusa ovata. S. ovata reduces carbon dioxide to acetate and acts as the microbial catalyst for plain graphite stick cathodes as the electron donor. In traditional 'H-cell' reactors, where the anode and cathode chambers were separated with a proton-selective membrane, the rates and columbic efficiencies of microbial electrosynthesis remained high when electron delivery at the cathode was powered with a direct current power source rather than with a potentiostat-poised cathode utilized in previous studies. A membrane-less reactor with a direct-current power source with the cathode and anode positioned to avoid oxygen exposure at the cathode, retained high rates of acetate production as well as high columbic and energetic efficiencies. The finding that microbial electrosynthesis is feasible without a membrane separating the anode from the cathode, coupled with a direct current power source supplying the energy for electron delivery, is expected to greatly simplify future reactor design and lower construction costs.
Extrahierte Werte
Jeder aus der Publikation entnommene Wert mit seiner Quelle, damit sich jede Zahl am Text prüfen lässt.
n = 55 extrahierte Werte
Wählen Sie eine Quellenangabe, um Zitat, Seite und Konfidenz hinter einem Wert zu sehen.
19 von 55 extrahierten Zeilen modellierbar
- 10 nicht kanonisiert (kein kanonischer Slug)
- 25 kein SI-Wert
- 1 außerhalb physikalischer Grenzen
| Parameter | Wert | Einheit | Konfidenz | Quelle | Anmerkungen | Modellierbar |
|---|---|---|---|---|---|---|
| Power Density | 55,2 | mW | 90 % | extrahiert | "Table 2 shows Power (mW) of 55.2 ± 6.2 for H-cell (3) at 5.0 V" · T=25°C, substrate=CO2 | Ausgeschlossen: kein SI-Wert |
| Power Density | 15,1 | mW | 90 % | extrahiert | "Table 2 shows Power (mW) of 15.1 ± 3.3 for Abiotic H-cell at 3.5 V" · T=25°C, substrate=CO2 | Ausgeschlossen: kein SI-Wert |
| Power Density | 6,9 | mW | 90 % | extrahiert | "Table 2 shows Power (mW) of 6.9 ± 1.9 for Membrane-less at 2.2 V" · T=25°C, substrate=CO2 | Ausgeschlossen: kein SI-Wert |
| Power Density | 13,8 | mW | 90 % | extrahiert | "Table 2 shows Power (mW) of 13.8 ± 1.1 for H-cell (1) at 3.0 V" · T=25°C, substrate=CO2 | Ausgeschlossen: kein SI-Wert |
| Coulombic efficiency | 105Außerhalb des physikalischen Bereichs, Quelle prüfen | % | 90 % | extrahiert | "Table 2 shows CE(%) of 105 ± 5% for Membrane-less at 1.9 V" · T=25°C, substrate=CO2 | Ausgeschlossen: außerhalb physikalischer Grenzen |
| Coulombic efficiency | 54 | % | 90 % | extrahiert | "Table 2 shows CE(%) of 54 ± 10% for Membrane-less at 2.5 V" · T=25°C, substrate=CO2 | Modellierbar |
| Coulombic efficiency | 89 | % | 90 % | extrahiert | "Table 2 shows CE(%) of 89 ± 12% for H-cell (3) at 5.0 V" · T=25°C, substrate=CO2 | Modellierbar |
| Coulombic efficiency | 83 | % | 90 % | extrahiert | "Table 2 shows CE(%) of 83 ± 11% for H-cell (2) at 3.5 V" · T=25°C, substrate=CO2 | Modellierbar |
| Current Density | 0,25 | A/m² | 90 % | extrahiert | "Table 2 shows Current density (A/m2) of 0.25 ± 0.06 for Membrane-less at 2.2 V" · T=25°C, substrate=CO2 | Modellierbar |
| Current Density | 0,46 | A/m² | 90 % | extrahiert | "Table 2 shows Current density (A/m2) of 0.46 ± 0.03 for Membrane-less at 2.5 V" · T=25°C, substrate=CO2 | Modellierbar |
| Current Density | 1,7 | A/m² | 90 % | extrahiert | "Table 2 shows Current density (A/m2) of 1.70 ± 0.19 for H-cell (3) at 5.0 V" · T=25°C, substrate=CO2 | Modellierbar |
| Current Density | 0,77 | A/m² | 90 % | extrahiert | "Table 2 shows Current density (A/m2) of 0.77 ± 0.05 for Abiotic H-cell at 3.5 V" · T=25°C, substrate=CO2 | Modellierbar |
| Current Density | 0,17 | A/m² | 90 % | extrahiert | "Table 2 shows Current density (A/m2) of 0.17 ± 0.04 for Membrane-less at 1.9 V" · T=25°C, substrate=CO2 | Modellierbar |
| Power Density | 19,8 | mW | 90 % | extrahiert | "Table 2 shows Power (mW) of 19.8 ± 1.8 for H-cell (2) at 3.5 V" · T=25°C, substrate=CO2 | Ausgeschlossen: kein SI-Wert |
| Coulombic efficiency | 79 | % | 90 % | extrahiert | "Table 2 shows CE(%) of 79 ± 6% for Membrane-less at 2.2 V" · T=25°C, substrate=CO2 | Modellierbar |
| Current Density | 0,71 | A/m² | 90 % | extrahiert | "Table 2 shows Current density (A/m2) of 0.71 ± 0.06 for H-cell (1) at 3.0 V" · T=25°C, substrate=CO2 | Modellierbar |
| Coulombic efficiency | 82 | % | 90 % | extrahiert | "Table 2 shows CE(%) of 82 ± 19% for H-cell (1) at 3.0 V" · T=25°C, substrate=CO2 | Modellierbar |
| Power Density | 14,4 | mW | 90 % | extrahiert | "Table 2 shows Power (mW) of 14.4 ± 0.7 for Membrane-less at 2.5 V" · T=25°C, substrate=CO2 | Ausgeschlossen: kein SI-Wert |
| Current Density | 0,87 | A/m² | 90 % | extrahiert | "Table 2 shows Current density (A/m2) of 0.87 ± 0.08 for H-cell (2) at 3.5 V" · T=25°C, substrate=CO2 | Modellierbar |
| Power Density | 3,9 | mW | 90 % | extrahiert | "Table 2 shows Power (mW) of 3.9 ± 0.6 for Membrane-less at 1.9 V" · T=25°C, substrate=CO2 | Ausgeschlossen: kein SI-Wert |
| Acetate Production Rate | 0,45 | mmole/day | 90 % | extrahiert | "Table 2 shows Acetate production (mmole/day) of 0.45 ± 0.02 for Membrane-less at…" · T=25°C, substrate=CO2, steady_state | Ausgeschlossen: kein SI-Wert |
| Acetate Production Rate | 164 | mmole/day/m² cathode | 90 % | extrahiert | "Table 2 shows acetate production (mmole/day/m2 cathode) of 164 ± 45 for H-cell (…" · T=25°C, substrate=CO2, steady_state | Ausgeschlossen: kein SI-Wert |
| Acetate Production Rate | 38 | mmole/day/m² cathode | 90 % | extrahiert | "Table 2 shows acetate production (mmole/day/m2 cathode) of 38 ± 2 for Membrane-l…" · T=25°C, substrate=CO2, steady_state | Ausgeschlossen: kein SI-Wert |
| Acetate Production Rate | 1,07 | mmole/day | 90 % | extrahiert | "As with the lower applied voltages, there was a steady production of acetate ove…" · T=25°C, substrate=CO2, steady_state | Ausgeschlossen: kein SI-Wert |
| Acetate Production Rate | 83 | mmole/day/m² cathode | 90 % | extrahiert | "Table 2 shows acetate production (mmole/day/m2 cathode) of 83 ± 12 for H-cell (2…" · T=25°C, substrate=CO2, steady_state | Ausgeschlossen: kein SI-Wert |
Methodik
Welches System und wie es betrieben wurde
Betriebsbedingungen
2 Läufe extrahiert| Lauf | T°C | pHAnolyt | pHKatholyt | Substrat | [S]mg/L | HRTh | Modus | R_extΩ | V_appV | Inokulum |
|---|---|---|---|---|---|---|---|---|---|---|
| v2-6dffa9aff721312b | 25 | — | — | CO2 | — | — | — | — | — | — |
| v2-866a4115af33894b | 25 | — | — | CO2 | — | — | steady_state | — | — | — |
Extraktionspipeline
Rohextraktionen, Artefakte, Qualitätssignal
Extraktionsqualität
EhrlichkeitssignalBemessen Sie Ihr Vertrauen in die extrahierten Inhalte an diesen Signalen – so hat die Pipeline ihre eigene Ausgabe für diese Publikation bewertet.
Mittlere Parameterkonfidenz
90 %
Durchschnittliche Konfidenz der oben angezeigten PaperParameter-Zeilen
vor dem Zitieren mit dem Quell-PDF abgleichen · Werte 0–1
Diagramm-Explorer
Verändern Sie die Eingaben dieser Publikation und sehen Sie, wie sich das vorhergesagte Ergebnis verschiebt.
Modell erkunden
Der Reaktor in 3D, mit Strömung, die sich ein- und ausschalten lässt.
KI-Erkenntnisse
Widersprüche, Lücken und Chancen aus dem Vergleich dieser Publikation mit dem Korpus.
Ähnliche Publikationen vergleichen
Die nächsten Publikationen nach System, Materialien und Organismen, mit ihren Ergebnissen nebeneinander.
Quell-PDF
Die Publikation, wie sie erschienen ist.
Repräsentatives Modell, generisches mikrobielles elektrochemisches System
Zum Interagieren tippenRepräsentatives Modell, generisches mikrobielles elektrochemisches System
Repräsentatives Modell: mikrobielles elektrochemisches System – zugeordnet nur anhand des Systemtyps der Publikation, nicht ihres Reaktors oder ihrer Geometrie.
In diesem Datensatz
Organismen, Parameter und Materialien, die diese Publikation berichtet. Jeder Eintrag verweist auf seine Seite.
Organismen · 1
Schlagwörter
- Cathode
- Anode
- Electrosynthesis
- Microbial fuel cell
- Chemical engineering
- Chemistry
- Materials science
- Nanotechnology
- Electrochemistry
- Electrode
Zitieren
Cloelle G. S. Giddings, Kelly P. Nevin, Trevor Woodward (2015). Simplifying microbial electrosynthesis reactor design. Frontiers in Microbiology. https://doi.org/10.3389/fmicb.2015.00468
- Zeitschrift
- Frontiers in Microbiology
Öffnen Sie das Modell im Labor, um alle Steuerelemente, die Parameterbearbeitung und Vorlagen-Overlays zu nutzen.
Im Labor öffnen