Forschungsdaten – Titel und Zusammenfassungen von Publikationen, extrahierte Daten und Katalogeinträge – erscheinen in ihrer Originalsprache Englisch.
Publikation
Hetero‐Coupling of Bio‐Based Medium‐Chain Carboxylic Acids by Kolbe Electrolysis Enables High Fuel Yield and Efficiency
Zusammenfassung
Was die Publikation berichtet, in ihren eigenen Worten.
Zusammenfassung
Mixtures of n ‐carboxylic acids ( n ‐CA) as derived from microbial conversion of waste biomass were converted to bio‐fuel using Kolbe electrolysis. While providing full carbon and electron balances, key parameters like electrolysis time, chain length of n ‐CA, and pH were investigated for their influence on reaction efficiency. Electrolysis of n ‐hexanoic acid showed the highest coulombic efficiency (CE) of 58.9±16.4 % ( n =4) for liquid fuel production among individually tested n ‐CA. Duration of the electrolysis was varied within a range of 0.27 to 1.02 faraday equivalents without loss of efficiency. Noteworthy, CE increased to around 70 % by hetero‐coupling when electrolysing n ‐CA mixtures regardless of the applied pH. Thus, 1 L of fuel could be produced from 12.4 mol of n ‐CA mixture using 5.02 kWh (<1 € L⁻¹). Thus, a coupling with microbial processes producing n ‐CA mixtures from different organic substrates and waste is more than promising.
Extrahierte Werte
Jeder aus der Publikation entnommene Wert mit seiner Quelle, damit sich jede Zahl am Text prüfen lässt.
n = 68 extrahierte Werte
Wählen Sie eine Quellenangabe, um Zitat, Seite und Konfidenz hinter einem Wert zu sehen.
0 von 68 extrahierten Zeilen modellierbar
- 68 nicht kanonisiert (kein kanonischer Slug)
| Parameter | Wert | Einheit | Konfidenz | Quelle | Anmerkungen | Modellierbar |
|---|---|---|---|---|---|---|
| Geometric surface area of platinized titanium working electrode | 2 | cm² | 100 % | extrahiert | "a platinized titanium WE (Umicore, Schwaebisch Gmuend, Germany) with a geometric…" · cell=two-chamber (ion exchange membrane fumasep FKS-PET-130), 200 mL anolyte, charge=up to 0.45 FE, electrode=platinized titanium, geometric area 2 cm2, electrolyte=0.25 m Na2SO4 | Ausgeschlossen: nicht kanonisiert (kein kanonischer Slug) |
| Supporting electrolyte (Na2SO4) concentration | 0,25 | m | 100 % | extrahiert | "Afterwards Na2SO4 was added up to 0.25 m." · cell=two-chamber (ion exchange membrane fumasep FKS-PET-130), 200 mL anolyte, charge=up to 0.45 FE, electrode=platinized titanium, geometric area 2 cm2, electrolyte=0.25 m Na2SO4 | Ausgeschlossen: nicht kanonisiert (kein kanonischer Slug) |
| Average anolyte temperature at the end of electrolysis (C4, C6, n-CA mixture) | 32,9 | °C | 100 % | extrahiert | "The average temperature of the anolyte at the end of the electrolysis was 32.9 °…" · cell=two-chamber (ion exchange membrane fumasep FKS-PET-130), 200 mL anolyte, charge=up to 0.45 FE, electrode=platinized titanium, geometric area 2 cm2, electrolyte=0.25 m Na2SO4 | Ausgeschlossen: nicht kanonisiert (kein kanonischer Slug) |
| Selectivity for homo-coupling (S homo) in the n-CA mixture | 49,7 ±1.1 | % | 100 % | gc-ms (organic phase), hplc (aqueous phase), micro-gc tcd (gas phase) | "Homo-coupling with S homo=49.7±1.1 % mainly takes place for C5-radicals derived …" · ph=7 and 8.2, cell=two-chamber (ion exchange membrane fumasep FKS-PET-130), 200 mL anolyte, acids=["n-butanoic acid (C4)","n-hexanoic acid (C6)","n-octanoic acid (C8)"], charge=up to 0.45 FE | Ausgeschlossen: nicht kanonisiert (kein kanonischer Slug) |
| Average anolyte temperature at the end of electrolysis (C8) | 36,1 | °C | 100 % | extrahiert | "The average temperature of the anolyte at the end of the electrolysis was 32.9 °…" · ph=8.6, cell=two-chamber (ion exchange membrane fumasep FKS-PET-130), 200 mL anolyte, acids=["n-octanoic acid (C8)"], charge=up to 0.45 FE | Ausgeschlossen: nicht kanonisiert (kein kanonischer Slug) |
| Working volume of the cathode chamber | 9 | mL | 100 % | extrahiert | "The working volume of the anode chamber was 200 mL and that of the cathode chamb…" · cell=two-chamber (ion exchange membrane fumasep FKS-PET-130), 200 mL anolyte, charge=up to 0.45 FE, electrode=platinized titanium, geometric area 2 cm2, electrolyte=0.25 m Na2SO4 | Ausgeschlossen: nicht kanonisiert (kein kanonischer Slug) |
| Selectivity for hetero-coupling (S hetero) in the n-CA mixture | 21,7 ±0.9 | % | 100 % | gc-ms (organic phase), hplc (aqueous phase), micro-gc tcd (gas phase) | "preferably perform hetero-coupling with C5-radicals resulting in S hetero=21.7±0…" · ph=7 and 8.2, cell=two-chamber (ion exchange membrane fumasep FKS-PET-130), 200 mL anolyte, acids=["n-butanoic acid (C4)","n-hexanoic acid (C6)","n-octanoic acid (C8)"], charge=up to 0.45 FE | Ausgeschlossen: nicht kanonisiert (kein kanonischer Slug) |
| Working volume of the anode chamber | 200 | mL | 100 % | extrahiert | "The working volume of the anode chamber was 200 mL and that of the cathode chamb…" · cell=two-chamber (ion exchange membrane fumasep FKS-PET-130), 200 mL anolyte, charge=up to 0.45 FE, electrode=platinized titanium, geometric area 2 cm2, electrolyte=0.25 m Na2SO4 | Ausgeschlossen: nicht kanonisiert (kein kanonischer Slug) |
| Distance between counter electrode and working electrode | 18 | mm | 100 % | extrahiert | "the counter electrode (CE, 18 mm distance to WE) with a CE chamber" · cell=two-chamber (ion exchange membrane fumasep FKS-PET-130), 200 mL anolyte, charge=up to 0.45 FE, electrode=platinized titanium, geometric area 2 cm2, electrolyte=0.25 m Na2SO4 | Ausgeschlossen: nicht kanonisiert (kein kanonischer Slug) |
| CEdimer (n-tetradecane) for C8 | 16,8 ±5.48 | % | 100 % | gc-ms (organic phase), hplc (aqueous phase), micro-gc tcd (gas phase) | "In the electrolysis at pH=8.6, the dimer n-tetradecane is the main product with …" · ph=8.6, cell=two-chamber (ion exchange membrane fumasep FKS-PET-130), 200 mL anolyte, acids=["n-octanoic acid (C8)"], charge=up to 0.45 FE | Ausgeschlossen: nicht kanonisiert (kein kanonischer Slug) |
| CEacid degradation of the n-CA mixture | 80 | % | 100 % | gc-ms (organic phase), hplc (aqueous phase), micro-gc tcd (gas phase) | "Figure 4 shows a high CEacid degradation>80 % for both tested pHs." · ph=7 and 8.2, cell=two-chamber (ion exchange membrane fumasep FKS-PET-130), 200 mL anolyte, acids=["n-butanoic acid (C4)","n-hexanoic acid (C6)","n-octanoic acid (C8)"], charge=up to 0.45 FE | Ausgeschlossen: nicht kanonisiert (kein kanonischer Slug) |
| CECO2 for C4 | 9,1 ±5.1 | % | 100 % | gc-ms (organic phase), hplc (aqueous phase), micro-gc tcd (gas phase) | "This is strongly supported by the low CECO2 of 9.1±5.1 %, as CECO2 is directly l…" · ph=7, cell=two-chamber (ion exchange membrane fumasep FKS-PET-130), 200 mL anolyte, acids=["n-butanoic acid (C4)"], charge=up to 0.45 FE | Ausgeschlossen: nicht kanonisiert (kein kanonischer Slug) |
| SΣProp (propane + propene) for C4 | 85,5 ±3.6 | % | 100 % | gc-ms (organic phase), hplc (aqueous phase), micro-gc tcd (gas phase) | "In addition to n-hexane with CEdimer=3.0±1.9 %, only ΣProp (the sum of propane a…" · ph=7, cell=two-chamber (ion exchange membrane fumasep FKS-PET-130), 200 mL anolyte, acids=["n-butanoic acid (C4)"], charge=up to 0.45 FE | Ausgeschlossen: nicht kanonisiert (kein kanonischer Slug) |
| CEO2 (oxygen evolution) for C6 | 2 ±0.8 | % | 100 % | gc-ms (organic phase), hplc (aqueous phase), micro-gc tcd (gas phase) | "Furthermore, the CEO2 increased significantly, up to 31.0±14.3 % compared to C6 …" · ph=7, cell=two-chamber (ion exchange membrane fumasep FKS-PET-130), 200 mL anolyte, acids=["n-hexanoic acid (C6)"], charge=up to 0.45 FE | Ausgeschlossen: nicht kanonisiert (kein kanonischer Slug) |
| CEO2 (oxygen evolution) for C4 | 31 ±14.3 | % | 100 % | gc-ms (organic phase), hplc (aqueous phase), micro-gc tcd (gas phase) | "Furthermore, the CEO2 increased significantly, up to 31.0±14.3 % compared to C6 …" · ph=7, cell=two-chamber (ion exchange membrane fumasep FKS-PET-130), 200 mL anolyte, acids=["n-butanoic acid (C4)"], charge=up to 0.45 FE | Ausgeschlossen: nicht kanonisiert (kein kanonischer Slug) |
| CEO2 (oxygen evolution) for C8 | 27,8 ±10.2 | % | 100 % | gc-ms (organic phase), hplc (aqueous phase), micro-gc tcd (gas phase) | "The CEO2 for C8 (27.8±10.2 %) is comparable to that reached when using C4 as sub…" · ph=8.6, cell=two-chamber (ion exchange membrane fumasep FKS-PET-130), 200 mL anolyte, acids=["n-octanoic acid (C8)"], charge=up to 0.45 FE | Ausgeschlossen: nicht kanonisiert (kein kanonischer Slug) |
| CEΣProp (propane + propene) for C4 | 8,6 ±3.4 | % | 100 % | gc-ms (organic phase), hplc (aqueous phase), micro-gc tcd (gas phase) | "In addition to n-hexane with CEdimer=3.0±1.9 %, only ΣProp (the sum of propane a…" · ph=7, cell=two-chamber (ion exchange membrane fumasep FKS-PET-130), 200 mL anolyte, acids=["n-butanoic acid (C4)"], charge=up to 0.45 FE | Ausgeschlossen: nicht kanonisiert (kein kanonischer Slug) |
| Charge passed (up to) | 0,45 | FE | 100 % | extrahiert | "Kolbe electrolysis of 0.5 m n-butanoic acid (C4), n-hexanoic acid (C6), and n-oc…" · cell=two-chamber (ion exchange membrane fumasep FKS-PET-130), 200 mL anolyte, charge=up to 0.45 FE, electrode=platinized titanium, geometric area 2 cm2, electrolyte=0.25 m Na2SO4 | Ausgeschlossen: nicht kanonisiert (kein kanonischer Slug) |
| Current density | 150 | mA cm⁻² | 100 % | extrahiert | "Kolbe electrolysis of 0.5 m n-butanoic acid (C4), n-hexanoic acid (C6), and n-oc…" · cell=two-chamber (ion exchange membrane fumasep FKS-PET-130), 200 mL anolyte, charge=up to 0.45 FE, electrode=platinized titanium, geometric area 2 cm2, electrolyte=0.25 m Na2SO4 | Ausgeschlossen: nicht kanonisiert (kein kanonischer Slug) |
| Total acid concentration of the artificial n-CA mixture | 0,47 | m | 100 % | extrahiert | "Kolbe electrolysis of a 0.47 m artificial n-CA mixture containing n-butanoic aci…" · cell=two-chamber (ion exchange membrane fumasep FKS-PET-130), 200 mL anolyte, acids=["n-butanoic acid (C4)","n-hexanoic acid (C6)","n-octanoic acid (C8)"], charge=up to 0.45 FE, electrode=platinized titanium, geometric area 2 cm2 | Ausgeschlossen: nicht kanonisiert (kein kanonischer Slug) |
| n-CA concentration of single-acid electrolyses | 0,5 | m | 100 % | extrahiert | "Kolbe electrolysis of 0.5 m n-butanoic acid (C4), n-hexanoic acid (C6), and n-oc…" · cell=two-chamber (ion exchange membrane fumasep FKS-PET-130), 200 mL anolyte, acids=["n-butanoic acid (C4)","n-hexanoic acid (C6)","n-octanoic acid (C8)"], charge=up to 0.45 FE, electrode=platinized titanium, geometric area 2 cm2 | Ausgeschlossen: nicht kanonisiert (kein kanonischer Slug) |
| pH of the n-CA mixture (second level) | 8,2 | — | 100 % | extrahiert | "Kolbe electrolysis of a 0.47 m artificial n-CA mixture containing n-butanoic aci…" · ph=8.2, cell=two-chamber (ion exchange membrane fumasep FKS-PET-130), 200 mL anolyte, acids=["n-butanoic acid (C4)","n-hexanoic acid (C6)","n-octanoic acid (C8)"], charge=up to 0.45 FE | Ausgeschlossen: nicht kanonisiert (kein kanonischer Slug) |
| pH of C4 and C6 electrolyses | 7 | — | 100 % | extrahiert | "Kolbe electrolysis of 0.5 m n-butanoic acid (C4), n-hexanoic acid (C6), and n-oc…" · ph=7, cell=two-chamber (ion exchange membrane fumasep FKS-PET-130), 200 mL anolyte, acids=["n-butanoic acid (C4)","n-hexanoic acid (C6)"], charge=up to 0.45 FE | Ausgeschlossen: nicht kanonisiert (kein kanonischer Slug) |
| Starting pH for C8 solution (raised because of foam formation) | 8,6 | — | 100 % | extrahiert | "the starting pH of the solution has to be increased, here from pH=7 to pH=8.6, b…" · ph=8.6, cell=two-chamber (ion exchange membrane fumasep FKS-PET-130), 200 mL anolyte, acids=["n-octanoic acid (C8)"], charge=up to 0.45 FE | Ausgeschlossen: nicht kanonisiert (kein kanonischer Slug) |
| CEdimer (n-hexane) for C4 | 3 ±1.9 | % | 100 % | gc-ms (organic phase), hplc (aqueous phase), micro-gc tcd (gas phase) | "In addition to n-hexane with CEdimer=3.0±1.9 %, only ΣProp (the sum of propane a…" · ph=7, cell=two-chamber (ion exchange membrane fumasep FKS-PET-130), 200 mL anolyte, acids=["n-butanoic acid (C4)"], charge=up to 0.45 FE | Ausgeschlossen: nicht kanonisiert (kein kanonischer Slug) |
Extraktionspipeline
Rohextraktionen, Artefakte, Qualitätssignal
Extraktionsqualität
EhrlichkeitssignalBemessen Sie Ihr Vertrauen in die extrahierten Inhalte an diesen Signalen – so hat die Pipeline ihre eigene Ausgabe für diese Publikation bewertet.
Mittlere Parameterkonfidenz
96 %
Durchschnittliche Konfidenz der oben angezeigten PaperParameter-Zeilen
vor dem Zitieren mit dem Quell-PDF abgleichen · Werte 0–1
Diagramm-Explorer
Verändern Sie die Eingaben dieser Publikation und sehen Sie, wie sich das vorhergesagte Ergebnis verschiebt.
Modell erkunden
Der Reaktor in 3D, mit Strömung, die sich ein- und ausschalten lässt.
KI-Erkenntnisse
Widersprüche, Lücken und Chancen aus dem Vergleich dieser Publikation mit dem Korpus.
Ähnliche Publikationen vergleichen
Die nächsten Publikationen nach System, Materialien und Organismen, mit ihren Ergebnissen nebeneinander.
Quell-PDF
Die Publikation, wie sie erschienen ist.
Dieser Publikation ist noch kein 3D-Modell zugeordnet. Die daraus extrahierten Werte stehen unter „Extrahierte Werte“.
Schlagwörter
- Kolbe electrolysis
- medium-chain carboxylic acids
- Coulombic efficiency
- microbial transformation
- biofuels
- chain length effects
Zitieren
Katharina Neubert, Max Hell, Micjel Chávez Morejón et al. (2022). Hetero‐Coupling of Bio‐Based Medium‐Chain Carboxylic Acids by Kolbe Electrolysis Enables High Fuel Yield and Efficiency. ChemSusChem. https://doi.org/10.1002/cssc.202201426
- Zeitschrift
- ChemSusChem