Forschungsdaten – Titel und Zusammenfassungen von Publikationen, extrahierte Daten und Katalogeinträge – erscheinen in ihrer Originalsprache Englisch.
Publikation · MES
Microbial electrosynthesis with Clostridium ljungdahlii benefits from hydrogen electron mediation and permits a greater variety of products
Zusammenfassung
Was die Publikation berichtet, in ihren eigenen Worten.
Zusammenfassung
Microbial electrosynthesis (MES) is a very promising technology addressing the challenge of carbon dioxide recycling into organic compounds, which might serve as building blocks for the (bio)chemical industry. However, poor process control and understanding of fundamental aspects such as the microbial extracellular electron transfer (EET) currently limit further developments. In the model acetogen Clostridium ljungdahlii , both direct and indirect electron consumption via hydrogen have been proposed. However, without clarification neither targeted development of the microbial catalyst nor process engineering of MES are possible. In this study, cathodic hydrogen is demonstrated to be the dominating electron source for C. ljungdahlii at electroautotrophic MES allowing for superior growth and biosynthesis, compared to previously reported MES using pure cultures. Hydrogen availability distinctly controlled an either planktonic- or biofilm-dominated lifestyle of C. ljungdahlii . The most robust operation yielded higher planktonic cell densities in a hydrogen mediated process, which demonstrated the uncoupling of growth and biofilm formation. This coincided with an increase of metabolic activity, acetate titers, and production rates (up to 6.06 g L -1 at 0.11 g L -1 d -1 ). For the first time, MES using C. ljungdahlii was also revealed to deliver other products than acetate in significant amounts: here up to 0.39 g L -1 glycine or 0.14 g L -1 ethanolamine. Hence, a deeper comprehension of the electrophysiology of C. ljungdahlii was shown to be key for designing and improving bioprocess strategies in MES research.
Extrahierte Werte
Jeder aus der Publikation entnommene Wert mit seiner Quelle, damit sich jede Zahl am Text prüfen lässt.
n = 52 extrahierte Werte
Wählen Sie eine Quellenangabe, um Zitat, Seite und Konfidenz hinter einem Wert zu sehen.
13 von 52 extrahierten Zeilen modellierbar
- 21 nicht kanonisiert (kein kanonischer Slug)
- 7 kein SI-Wert
- 1 nicht als modellierbar markiert
- 4 Verifizierer hat den Wert abgelehnt
- 6 widerspricht anderen Publikationen
| Parameter | Wert | Einheit | Konfidenz | Quelle | Anmerkungen | Modellierbar |
|---|---|---|---|---|---|---|
| Acetate Production Rate | 2,93 | g m⁻² d⁻¹ | 95 % | hplc | "In the planktonic-dominant reactor, the acetate production was very high achievi…" · T=37°C, pH(an)=5.7, substrate=CO2, steady_state | Ausgeschlossen: kein SI-Wert |
| Electrode Surface Area×2 | 153 | cm² | 95 % | geometric measurement | "In certain experiments, as indicated in the respective sections, bigger cathodes…" · replicates_n=1, condition_hint=Design parameter, larger electrode, electrode_material=graphite EDM-3 | Modellierbar |
| Electrode Surface Area×2 | 26,6 | cm² | 95 % | geometric measurement | "The standard electrode surface area was 26.59 cm2 (surface-area-to-reactor-volum…" · replicates_n=1, condition_hint=Design parameter, standard electrode, electrode_material=graphite EDM-3 | Modellierbar |
| Coulombic efficiency | 87,4 | % | 95 % | chronoamperometry with charge integration | "In the planktonic-dominant reactor, the acetate production was very high achievi…" · T=37°C, pH(an)=5.7, substrate=CO2, steady_state | Modellierbar |
| H₂ evolution threshold (dissolved) | -650 | mV | 95 % | linear sweep voltammetry with h2 microsensor | "Dissolved H2 started being detected by a H2 microsensor close to the cathode sur…" · T=37°C, pH(an)=5.7, transient | Ausgeschlossen: nicht kanonisiert (kein kanonischer Slug) |
| H₂ evolution threshold (off-gas) | -780 | mV | 95 % | linear sweep voltammetry with off-gas analyzer | "At −780 mV, the off-gas analyzer detected H2 in the headspace in the same test (p…" · T=37°C, pH(an)=5.7, transient | Ausgeschlossen: nicht kanonisiert (kein kanonischer Slug) |
| Acetate Production Rate | 0,11 | g L⁻¹ d⁻¹ | 95 % | hplc | "Acetate was produced electroautotrophically by C. ljungdahlii reaching a maximum…" · T=37°C, pH(an)=5.7, substrate=CO2, steady_state | Modellierbar |
| Acetic Acid Concentration | 6,06 | g L⁻¹ | 95 % | hplc | "In the planktonic-dominant reactor, the acetate production was very high achievi…" · T=37°C, pH(an)=5.7, substrate=CO2, steady_state | Modellierbar |
| Inoculation density (high) | 1E8 ± 1,8E7 (SD) | cells | 95 % | cell counting with neubauer chamber | "C. ljungdahlii was inoculated in the MES from pre-grown autotrophic cultures usi…" · T=37°C, pH(an)=5.7, substrate=CO2, startup | Ausgeschlossen: nicht kanonisiert (kein kanonischer Slug) |
| Inoculation density (low) | 3,4E7 ± 6E6 (SD) | cells | 95 % | cell counting with neubauer chamber | "C. ljungdahlii was inoculated in the MES from pre-grown autotrophic cultures usi…" · T=37°C, pH(an)=5.7, substrate=CO2, startup | Ausgeschlossen: nicht kanonisiert (kein kanonischer Slug) |
| Surface-area-to-reactor-volume ratio (standard)×2 | 66,5 | cm² L⁻¹ | 95 % | geometric calculation | "The standard electrode surface area was 26.59 cm2 (surface-area-to-reactor-volum…" · replicates_n=1, condition_hint=Design parameter, standard electrode, electrode_material=graphite EDM-3 | Ausgeschlossen: nicht kanonisiert (kein kanonischer Slug) |
| Surface-area-to-reactor-volume ratio (larger)×2 | 383 | cm² L⁻¹ | 95 % | geometric calculation | "In certain experiments, as indicated in the respective sections, bigger cathodes…" · replicates_n=1, condition_hint=Design parameter, larger electrode, electrode_material=graphite EDM-3 | Ausgeschlossen: nicht kanonisiert (kein kanonischer Slug) |
| Glycine titer | 0,15 | g L⁻¹ | 90 % | hplc with phthaldialdehyde derivatization | "For MES using larger electrodes and hence increased H2 availability, lower titer…" · T=37°C, pH(an)=5.7, substrate=CO2, steady_state | Ausgeschlossen: nicht kanonisiert (kein kanonischer Slug) |
| Ethanolamine titer | 0,13 | g L⁻¹ | 90 % | hplc with phthaldialdehyde derivatization | "For MES using larger electrodes and hence increased H2 availability, lower titer…" · T=37°C, pH(an)=5.7, substrate=CO2, steady_state | Ausgeschlossen: nicht kanonisiert (kein kanonischer Slug) |
| Glycine titer | 0,045 | g L⁻¹ | 90 % | hplc with phthaldialdehyde derivatization | "In the biofilm-dominant reactor, very low titers were reached (0.045 g L−1 glyci…" · T=37°C, pH(an)=5.7, substrate=CO2, steady_state | Ausgeschlossen: nicht kanonisiert (kein kanonischer Slug) |
| Ethanolamine titer | 0,011 | g L⁻¹ | 90 % | hplc with phthaldialdehyde derivatization | "In the biofilm-dominant reactor, very low titers were reached (0.045 g L−1 glyci…" · T=37°C, pH(an)=5.7, substrate=CO2, steady_state | Ausgeschlossen: nicht kanonisiert (kein kanonischer Slug) |
| Absolute current (planktonic-dominant, larger electrode) | -15,4 | mA | 90 % | chronoamperometry | "but the peak of absolute current of −15.38 mA (compared to −8.66 ± 2.39 mA), and…" · T=37°C, pH(an)=5.7, substrate=CO2, steady_state | Ausgeschlossen: nicht kanonisiert (kein kanonischer Slug) |
| Absolute current (planktonic-dominant, smaller electrode) | -8,66 ± 2,39 (SD) | mA | 90 % | chronoamperometry | "but the peak of absolute current of −15.38 mA (compared to −8.66 ± 2.39 mA), and…" · T=37°C, pH(an)=5.7, substrate=CO2, steady_state | Ausgeschlossen: nicht kanonisiert (kein kanonischer Slug) |
| Acetic Acid Concentration | 1,43 | g L⁻¹ | 90 % | hplc | "The acetate titers obtained in the planktonic-dominant conditions (1.43 g L−1) w…" · T=37°C, pH(an)=5.7, substrate=CO2, steady_state | Modellierbar |
| Absolute current (biofilm-dominant, smaller electrode) | -6,38 ± 7,54 (SD) | mA | 90 % | chronoamperometry | "Noteworthy, the biofilm-dominant reactor had a similar performance in terms of a…" · T=37°C, pH(an)=5.7, substrate=CO2, steady_state | Ausgeschlossen: nicht kanonisiert (kein kanonischer Slug) |
| Specific H₂ Production | 0,31 | mL L⁻¹ min⁻¹ | 90 % | chronoamperometry with charge integration | "Estimated H2 production rates from transferred charge were 0.21 mL L−1 min−1 for…" · T=37°C, pH(an)=5.7, substrate=CO2, steady_state | Ausgeschlossen: kein SI-Wert |
| Coulombic efficiency | 18,2 | % | 90 % | chronoamperometry with charge integration | "CE (Fig. S9†) calculated for acetate formation between days 10 and 40 (no H2 lim…" · T=37°C, pH(an)=5.7, substrate=CO2, steady_state | Ausgeschlossen: widerspricht anderen Publikationen |
| Coulombic efficiency | 8,8 | % | 90 % | chronoamperometry with charge integration | "CE (Fig. S9†) calculated for acetate formation between days 10 and 40 (no H2 lim…" · T=37°C, pH(an)=5.7, substrate=CO2, steady_state | Ausgeschlossen: widerspricht anderen Publikationen |
| Coulombic efficiency | 1,2 | % | 90 % | chronoamperometry with charge integration | "In the biofilm-dominant reactor, very low titers were reached (0.045 g L−1 glyci…" · T=37°C, pH(an)=5.7, substrate=CO2, steady_state | Ausgeschlossen: widerspricht anderen Publikationen |
| Current Density | -0,45 | mA cm⁻² | 90 % | chronoamperometry | "Peak current densities (1-day window from the maximum) during this period were −…" · T=37°C, pH(an)=5.7, substrate=CO2, steady_state | Ausgeschlossen: Verifizierer hat den Wert abgelehnt |
Methodik
Welches System und wie es betrieben wurde
Betriebsbedingungen
7 Läufe extrahiert| Lauf | T°C | pHAnolyt | pHKatholyt | Substrat | [S]mg/L | HRTh | Modus | R_extΩ | V_appV | Inokulum |
|---|---|---|---|---|---|---|---|---|---|---|
| v2-05bb9b122ed74574 | 37 | 5.7 | — | CO2 | — | — | steady_state | — | -0.9 | — |
| v2-1ed627e55678e937 | 37 | 5.7 | — | — | — | — | transient | — | -0.78 | — |
| v2-5c6f1237f6c44eb0 | 37 | 5.7 | — | — | — | — | transient | — | -0.65 | — |
| v2-6061eaf6b02fa52a | 37 | 5.7 | — | CO2 | — | — | startup | — | -0.9 | — |
| v2-791630c0fb4d66e8 | 37 | 5.7 | — | CO2 | — | — | transient | — | -0.65 | — |
| v2-8016efea3e05875b | 37 | 5.7 | — | — | — | — | steady_state | — | -0.9 | — |
| v2-f4e941072482c6a6 | 37 | 5.7 | — | — | — | — | — | — | — | — |
Extraktionspipeline
Rohextraktionen, Artefakte, Qualitätssignal
Extraktionsqualität
EhrlichkeitssignalBemessen Sie Ihr Vertrauen in die extrahierten Inhalte an diesen Signalen – so hat die Pipeline ihre eigene Ausgabe für diese Publikation bewertet.
KI-Konfidenz
60 %
Vom Modell selbst angegebene Konfidenz
Mittlere Parameterkonfidenz
91 %
Durchschnittliche Konfidenz der oben angezeigten PaperParameter-Zeilen
vor dem Zitieren mit dem Quell-PDF abgleichen · Werte 0–1
Diagramm-Explorer
Verändern Sie die Eingaben dieser Publikation und sehen Sie, wie sich das vorhergesagte Ergebnis verschiebt.
Modell erkunden
Der Reaktor in 3D, mit Strömung, die sich ein- und ausschalten lässt.
KI-Erkenntnisse
Widersprüche, Lücken und Chancen aus dem Vergleich dieser Publikation mit dem Korpus.
Ähnliche Publikationen vergleichen
Die nächsten Publikationen nach System, Materialien und Organismen, mit ihren Ergebnissen nebeneinander.
Quell-PDF
Die Publikation, wie sie erschienen ist.
Repräsentatives Modell, generisches mikrobielles elektrochemisches System
Zum Interagieren tippenRepräsentatives Modell, generisches mikrobielles elektrochemisches System
Repräsentatives Modell: mikrobielles elektrochemisches System – zugeordnet nur anhand des Systemtyps der Publikation, nicht ihres Reaktors oder ihrer Geometrie.
In diesem Datensatz
Organismen, Parameter und Materialien, die diese Publikation berichtet. Jeder Eintrag verweist auf seine Seite.
Organismen · 1
Schlagwörter
- Electrosynthesis
- Clostridium
- Mediation
- Hydrogen
Zitieren
Santiago T. Boto, Bettina Bardl, Falk Harnisch et al. (2023). Microbial electrosynthesis with Clostridium ljungdahlii benefits from hydrogen electron mediation and permits a greater variety of products. Green Chemistry. https://doi.org/10.1039/d3gc00471f
- PubMed
- 37288452
- Zeitschrift
- Green Chemistry
Öffnen Sie das Modell im Labor, um alle Steuerelemente, die Parameterbearbeitung und Vorlagen-Overlays zu nutzen.
Im Labor öffnen