Forschungsdaten – Titel und Zusammenfassungen von Publikationen, extrahierte Daten und Katalogeinträge – erscheinen in ihrer Originalsprache Englisch.
Publikation
Graphite Fiber Brush Anodes for Increased Power Production in Air-Cathode Microbial Fuel Cells
Zusammenfassung
Was die Publikation berichtet, in ihren eigenen Worten.
Zusammenfassung
To efficiently generate electricity in microbial fuel cells, the surface area of the anode must be maximized to support biofilm growth while minimizing total reactor volume. Graphite fiber brush electrodes provide high surface areas and porosities. A brush electrode placed in a single-chamber air-cathode MFC produced a maximum power density of 1430 mW/m² (73 W/m³) with ammonia-treated brush anodes and acetate substrate, exceeding previous reports for MFC power densities.
Extrahierte Werte
Jeder aus der Publikation entnommene Wert mit seiner Quelle, damit sich jede Zahl am Text prüfen lässt.
n = 30 extrahierte Werte
Wählen Sie eine Quellenangabe, um Zitat, Seite und Konfidenz hinter einem Wert zu sehen.
29 von 30 extrahierten Zeilen modellierbar
- 1 nicht kanonisiert (kein kanonischer Slug)
| Parameter | Wert | Einheit | Konfidenz | Quelle | Anmerkungen | Modellierbar |
|---|---|---|---|---|---|---|
| Power Density Volumetric | 0,93 | W/m³ | 90 % | extrahiert | "Using a lower ionic strength solution reduced power production to 570 mW/m2 (0.9…" · T=23°C, substrate=glucose | Modellierbar |
| Power Density Volumetric | 29 | W/m³ | 90 % | extrahiert | "TABLE 1. Power Production and Internal Resistances of MFCs Containing Various Co…" · T=30°C, substrate=acetate | Modellierbar |
| Internal Resistance | 65 | Ω | 90 % | extrahiert | "TABLE 1. Power Production and Internal Resistances of MFCs Containing Various Co…" · T=23°C, substrate=glucose | Modellierbar |
| Internal Resistance | 58 | Ω | 90 % | extrahiert | "TABLE 1. Power Production and Internal Resistances of MFCs Containing Various Co…" · T=23°C, substrate=glucose | Modellierbar |
| Internal Resistance | 50 | Ω | 90 % | extrahiert | "The internal resistance of the brush B-MFC was 50 Ω, with values for the other r…" · T=23°C, substrate=glucose | Modellierbar |
| Power Density | 1.430 | mW/m² | 90 % | extrahiert | "Brush electrodes used in B-MFCs produced up to 1430 mW/m2 (2.3 W/m3), compared t…" · T=23°C, substrate=glucose | Modellierbar |
| Power Density | 1.100 | mW/m² | 90 % | extrahiert | "The maximum power production was 1100 mW/m2 (0.11 g of 6 µm diameter fibers) (Fi…" · T=23°C, substrate=glucose | Modellierbar |
| Power Density | 570 | mW/m² | 90 % | extrahiert | "Using a lower ionic strength solution reduced power production to 570 mW/m2 (0.9…" · T=23°C, substrate=glucose | Modellierbar |
| Power Density | 850 | mW/m² | 90 % | extrahiert | "In tests with the 10 µm diameter fiber, power ranged from 690 to 850 mW/m2 for m…" · T=23°C, substrate=glucose | Modellierbar |
| Power Density Volumetric | 2 | W/m³ | 90 % | extrahiert | "TABLE 1. Power Production and Internal Resistances of MFCs Containing Various Co…" · T=23°C, substrate=glucose | Modellierbar |
| Power Density Volumetric | 0,5 | W/m³ | 90 % | extrahiert | "Using a lower ionic strength solution reduced power production to 570 mW/m2 (0.9…" · T=23°C, substrate=glucose | Modellierbar |
| Power Density | 750 | mW/m² | 90 % | extrahiert | "Power production reached a maximum of 750 mW/m2 with the untreated anode, which …" · T=23°C, substrate=glucose | Modellierbar |
| Internal Resistance | 49 | Ω | 90 % | extrahiert | "TABLE 1. Power Production and Internal Resistances of MFCs Containing Various Co…" · T=23°C, substrate=glucose | Modellierbar |
| Coulombic efficiency | 23 | % | 90 % | extrahiert | "B-MFCs inoculated with wastewater produced up to 1430 mW/m2 (2.3 W/m3, CE ) 23%)…" · T=23°C, substrate=glucose | Modellierbar |
| Power Density | 600 | mW/m² | 90 % | extrahiert | "Brush electrodes used in B-MFCs produced up to 1430 mW/m2 (2.3 W/m3), compared t…" · T=23°C, substrate=glucose | Modellierbar |
| Current Density | 0,82 | mA/cm² | 90 % | extrahiert | "Based on polarization data, the maximum power produced was 2400 mW/m2 at a curre…" · T=30°C, substrate=acetate | Modellierbar |
| Voltage | 0,57 | V | 90 % | extrahiert | "producing a maximum voltage of 0.57 V and a CE ) 41% with the 1000 Ω resistor (F…" · T=30°C, substrate=acetate | Modellierbar |
| Coulombic efficiency | 41 | % | 90 % | extrahiert | "producing a maximum voltage of 0.57 V and a CE ) 41% with the 1000 Ω resistor (F…" · T=30°C, substrate=acetate | Modellierbar |
| Power Density Volumetric | 73 | W/m³ | 90 % | extrahiert | "Based on polarization data, the maximum power produced was 2400 mW/m2 at a curre…" · T=30°C, substrate=acetate | Modellierbar |
| Power Density | 2.400 | mW/m² | 90 % | extrahiert | "Based on polarization data, the maximum power produced was 2400 mW/m2 at a curre…" · T=30°C, substrate=acetate | Modellierbar |
| Internal Resistance | 31 | Ω | 90 % | extrahiert | "versus Rint ) 31 Ω for a carbon cloth C-MFC (200 mM PBS, 4 cm electrode spacing)" · T=30°C, substrate=acetate | Modellierbar |
| Power Density Volumetric | 0,98 | W/m³ | 90 % | extrahiert | "Brush electrodes used in B-MFCs produced up to 1430 mW/m2 (2.3 W/m3), compared t…" · T=23°C, substrate=glucose | Modellierbar |
| Power Density | 1.070 | mW/m² | 90 % | extrahiert | "TABLE 1. Power Production and Internal Resistances of MFCs Containing Various Co…" · T=30°C, substrate=acetate | Modellierbar |
| Power Density | 300 | mW/m² | 90 % | extrahiert | "Using a lower ionic strength solution reduced power production to 570 mW/m2 (0.9…" · T=23°C, substrate=glucose | Modellierbar |
| Power Density Volumetric | 1,2 | W/m³ | 90 % | extrahiert | "TABLE 1. Power Production and Internal Resistances of MFCs Containing Various Co…" · T=23°C, substrate=glucose | Modellierbar |
Methodik
Welches System und wie es betrieben wurde
Betriebsbedingungen
4 Läufe extrahiert| Lauf | T°C | pHAnolyt | pHKatholyt | Substrat | [S]mg/L | HRTh | Modus | R_extΩ | V_appV | Inokulum |
|---|---|---|---|---|---|---|---|---|---|---|
| v2-108fd662ed65880d | 30 | — | — | acetate | — | — | — | 50 | — | — |
| v2-92520e3fce75212b | 23 | — | — | glucose | — | — | — | — | — | — |
| v2-ef227790a6bba213 | 30 | — | — | acetate | — | — | — | 1000 | — | — |
| v2-fa0330df8f356026 | 30 | — | — | acetate | — | — | — | — | — | — |
Extraktionspipeline
Rohextraktionen, Artefakte, Qualitätssignal
Extraktionsqualität
EhrlichkeitssignalBemessen Sie Ihr Vertrauen in die extrahierten Inhalte an diesen Signalen – so hat die Pipeline ihre eigene Ausgabe für diese Publikation bewertet.
Mittlere Parameterkonfidenz
90 %
Durchschnittliche Konfidenz der oben angezeigten PaperParameter-Zeilen
vor dem Zitieren mit dem Quell-PDF abgleichen · Werte 0–1
Diagramm-Explorer
Verändern Sie die Eingaben dieser Publikation und sehen Sie, wie sich das vorhergesagte Ergebnis verschiebt.
Modell erkunden
Der Reaktor in 3D, mit Strömung, die sich ein- und ausschalten lässt.
KI-Erkenntnisse
Widersprüche, Lücken und Chancen aus dem Vergleich dieser Publikation mit dem Korpus.
Ähnliche Publikationen vergleichen
Die nächsten Publikationen nach System, Materialien und Organismen, mit ihren Ergebnissen nebeneinander.
Quell-PDF
Die Publikation, wie sie erschienen ist.
Dieser Publikation ist noch kein 3D-Modell zugeordnet. Die daraus extrahierten Werte stehen unter „Extrahierte Werte“.
Schlagwörter
- MFC
- air-cathode
- graphite brush anode
- power density
- acetate
Zitieren
Bruce Logan, Shaoan Cheng, Valerie Watson et al. (2007). Graphite Fiber Brush Anodes for Increased Power Production in Air-Cathode Microbial Fuel Cells. Environmental Science & Technology. https://doi.org/10.1021/es062644y
- Zeitschrift
- Environmental Science & Technology