Forschungsdaten – Titel und Zusammenfassungen von Publikationen, extrahierte Daten und Katalogeinträge – erscheinen in ihrer Originalsprache Englisch.
Publikation · MFC
The Effects of Surface Roughness of the Stainless-Steel Anode on Electricity Enhancement of Microbial Fuel Cell
- MFC
- Single Chamber
- Membraneless
- Bioanode Only
- Pure Culture
- Anode: Stainless Steel
Zusammenfassung
Was die Publikation berichtet, in ihren eigenen Worten.
Zusammenfassung
Microorganisms actively catabolize substrate, and bioelectricity is generated. Microbial fuel cells (MFCs) could be utilized as a power generator in small devices. The discovery of species of microorganisms is called Rhodopseudomonas palustris KU-EGAT 13. The experiments have been conducted with the production of electricity from this type of microorganism in a single chamber microbial fuel cell. The study used 4 surface roughness of anode electrode single chamber micro fuel to study the performance of microbial fuel cell effect from the anode. Three stainless steel plates were polished to uniform roughness to the magnitude between 0.05 and 1 µm. After 24 h of experimentation, the rough electrode’s open-circuit voltage (OCV) and power densities were much higher than that produced by the smooth one. Moreover, the smooth surface is higher than the charge-transfer resistance of the rough electrode. The rough surface’s better electrochemical performance is due to denser biofilm grown on the surface, which was observed by scanning electron microscopy (SEM) and figuring out the microbial number in an image using an ImageJ program. HIGHLIGHTS The new discovery of species of microorganisms is called Rhodopseudomonas palustris KU-EGAT 13 which can produce electricity in a single chamber microbial fuel cell The performance of MFCs has gotten an effect from the different anode surface roughness.The biomass growth is larger than a rougher anode surface, which contributes to anode’s efficiency After observed by SEM, found that when it is in the highest anode surface roughness directed towards the number of microbes stick on the surface GRAPHICAL ABSTRACT
KI-Zusammenfassung: entspricht dem Abstract (70 % Konfidenz) · mit dem Quell-PDF abgleichen
Extrahierte Werte
Jeder aus der Publikation entnommene Wert mit seiner Quelle, damit sich jede Zahl am Text prüfen lässt.
n = 62 extrahierte Werte
Wählen Sie eine Quellenangabe, um Zitat, Seite und Konfidenz hinter einem Wert zu sehen.
14 von 58 extrahierten Zeilen modellierbar
- 6 nicht kanonisiert (kein kanonischer Slug)
- 32 kein SI-Wert
- 6 außerhalb physikalischer Grenzen
| Parameter | Wert | Einheit | Konfidenz | Quelle | Anmerkungen | Modellierbar |
|---|---|---|---|---|---|---|
| Electrode Surface Area | 20Einheit in der Altdatentabelle nicht erfasst | — | 90 % | llm | methods | |
| Open Circuit Voltage | 0,421 | V | 90 % | llm | results | |
| Temperature | 25 | °C | 70 % | llm | methods | |
| Ambient Temperature | 25 | °C | 70 % | llm | conclusion | |
| Power density×4 | 409 | µW/m³ | 100 % | extrahiert | "The maximum power densities of roughness 0.0858, 0.3662, 0.6601 and 0.9562 Ra we…" | Ausgeschlossen: kein SI-Wert |
| Electrode Surface Roughness×2 | 0,956 | Ra | 95 % | surface roughness tester | "The final roughness of each stainless-steel anodes was approximate 0.0858, 0.366…" · T=20°C | Ausgeschlossen: kein SI-Wert |
| SEM Sample Area×2 | 25 | mm² | 95 % | extrahiert | "Another set of 4 different surface anodes were derived from cutting 5×5 mm² of t…" · condition_hint=SEM sample preparation, 5×5 mm² cut from anode, electrode_material=stainless steel | Ausgeschlossen: nicht kanonisiert (kein kanonischer Slug) |
| Electrode Surface Roughness×2 | 0,366 | Ra | 95 % | surface roughness tester | "The final roughness of each stainless-steel anodes was approximate 0.0858, 0.366…" · T=20°C | Ausgeschlossen: kein SI-Wert |
| Electrode Surface Roughness×2 | 0,66 | Ra | 95 % | surface roughness tester | "The final roughness of each stainless-steel anodes was approximate 0.0858, 0.366…" · T=20°C | Ausgeschlossen: kein SI-Wert |
| Electrode Surface Roughness×2 | 0,0858 | Ra | 95 % | surface roughness tester | "The final roughness of each stainless-steel anodes was approximate 0.0858, 0.366…" · T=20°C | Ausgeschlossen: kein SI-Wert |
| Power Density×3 | 611 | µW/m³ | 95 % | extrahiert | "The maximum power densities of roughness 0.0858, 0.3662, 0.6601 and 0.9562 Ra we…" · batch | Ausgeschlossen: kein SI-Wert |
| Power Density | 550 | µW/m³ | 90 % | polarization_curve | "The maximum power densities of roughness 0.0858, 0.3662, 0.6601 and 0.9562 Ra we…" · batch | Ausgeschlossen: kein SI-Wert |
| Power Density | 611 | µW/m³ | 90 % | polarization_curve | "The maximum power densities of roughness 0.0858, 0.3662, 0.6601 and 0.9562 Ra we…" · batch | Ausgeschlossen: kein SI-Wert |
| Power Density | 409 | µW/m³ | 90 % | polarization_curve | "The maximum power densities of roughness 0.0858, 0.3662, 0.6601 and 0.9562 Ra we…" · batch | Ausgeschlossen: kein SI-Wert |
| Power Density | 487 | µW/m³ | 90 % | polarization_curve | "The maximum power densities of roughness 0.0858, 0.3662, 0.6601 and 0.9562 Ra we…" · batch | Ausgeschlossen: kein SI-Wert |
| Bacterial Population×2 | 6 | cells | 85 % | sem imaging with imagej counting | "Figures 6 - 9 showed the results of the surface inspection by SEM and the number…" · T=20°C, steady_state | Ausgeschlossen: kein SI-Wert |
| Bacterial Population×2 | 38 | cells | 85 % | sem imaging with imagej counting | "Figures 6 - 9 showed the results of the surface inspection by SEM and the number…" · T=20°C, steady_state | Ausgeschlossen: kein SI-Wert |
| Bacterial Population×2 | 117 | cells | 85 % | sem imaging with imagej counting | "Figures 6 - 9 showed the results of the surface inspection by SEM and the number…" · T=20°C, steady_state | Ausgeschlossen: kein SI-Wert |
| Bacterial Population×2 | 18 | cells | 85 % | sem imaging with imagej counting | "Figures 6 - 9 showed the results of the surface inspection by SEM and the number…" · T=20°C, steady_state | Ausgeschlossen: kein SI-Wert |
| Chambers | 1 | — | 80 % | extrahiert | Ausgeschlossen: nicht kanonisiert (kein kanonischer Slug) | |
| Membrane material | CEM | — | 80 % | extrahiert | Ausgeschlossen: kein SI-Wert | |
| Reactor type | single-chamber | — | 80 % | extrahiert | Ausgeschlossen: nicht kanonisiert (kein kanonischer Slug) | |
| Power Density×2 | 550 | µW/m³ | 65 % | polarization curve | "The maximum power densities of roughness 0.0858, 0.3662, 0.6601 and 0.9562 Ra we…" · T=20°C, steady_state | Ausgeschlossen: kein SI-Wert |
| Power Density×2 | 487 | µW/m³ | 65 % | polarization curve | "The maximum power densities of roughness 0.0858, 0.3662, 0.6601 and 0.9562 Ra we…" · T=20°C, steady_state | Ausgeschlossen: kein SI-Wert |
| pH×2 | 231Außerhalb des physikalischen Bereichs, Quelle prüfen | - | 60 % | extrahiert | "onference on Miniaturized Systems" | Ausgeschlossen: außerhalb physikalischer Grenzen |
Methodik
Welches System und wie es betrieben wurde
Methodik
Methodology
The study used 4 surface roughness levels of anode electrodes in a single-chamber MFC, with experimentation lasting 24 hours.
Systemkonfiguration
| Feld | Wert |
|---|---|
| chamber configuration | single |
| system type | MFC |
Elektrodenspezifikationen
| Feld | Wert |
|---|---|
| materials | ["stainless steel"] |
Biologische Parameter
| Feld | Wert |
|---|---|
| microbial community | pseudomonas palustris ku-egat 13. the experiments have been conducted with the production of electricity from this type of microorganism in a single chamber microbial fuel cell. the study used 4 surface roughness of anode electrode single chamber micro fuel to study the performance of microbial fuel cell effect from the anode. three stainless steel plates were polished to uniform roughness to the magnitude between 0.05 and 1 µm. after 24 h of experimentation |
Leistungskennzahlen
| Feld | Wert |
|---|---|
| citation count | 4 |
Betriebsbedingungen
14 Läufe extrahiert| Lauf | T°C | pHAnolyt | pHKatholyt | Substrat | [S]mg/L | HRTh | Modus | R_extΩ | V_appV | Inokulum |
|---|---|---|---|---|---|---|---|---|---|---|
| baseline_roughness_0.0858_Ra | — | — | — | — | — | — | batch | — | — | Nakhon Si Thammarat |
| baseline_roughness_0.0858_Ra #2 | — | — | — | — | — | — | batch | — | — | Nakhon Si Thammarat |
| baseline_roughness_0.3662_Ra | — | — | — | — | — | — | batch | — | — | Nakhon Si Thammarat |
| baseline_roughness_0.3662_Ra #2 | — | — | — | — | — | — | batch | — | — | Nakhon Si Thammarat |
| baseline_roughness_0.6601_Ra | — | — | — | — | — | — | batch | — | — | Nakhon Si Thammarat |
| baseline_roughness_0.6601_Ra #2 | — | — | — | — | — | — | batch | — | — | Nakhon Si Thammarat |
| baseline_roughness_0.9562_Ra | — | — | — | — | — | — | batch | — | — | Nakhon Si Thammarat |
| baseline_roughness_0.9562_Ra #2 | — | — | — | — | — | — | batch | — | — | Nakhon Si Thammarat |
| v2-0c6f878ad7b296af | 20 | — | — | — | — | — | startup | — | — | — |
| v2-9fda0fcf9f3b817f | 20 | — | — | — | — | — | steady_state | — | — | — |
| v2-e2e59ee6b05b2499 | 20 | — | — | — | — | — | — | — | — | — |
| v2-e400481e4d106f98 | 20 | — | — | — | — | — | — | — | — | — |
| v2-e901e361c59df443 | — | — | — | — | — | — | batch | — | — | — |
| v2-f586e9af22985397 | — | — | — | — | — | — | — | — | — | — |
Ergebnisse
Was gemessen wurde und was funktioniert hat
Elektrochemie
8 Konstanten| Elektrode | Reaktion | Parameter | Wert | Einheit | Konf. |
|---|---|---|---|---|---|
| anode | — | ocv_open_circuit_voltage | 0.57 | Volt | 100 % |
| anode | — | ocv_open_circuit_voltage | 0.6418 | Volt | 100 % |
| anode | — | ocv_open_circuit_voltage | 0.4933 | Volt | 100 % |
| anode | — | ocv_open_circuit_voltage | 0.6542 | Volt | 100 % |
| anode | — | ocv_open_circuit_voltage | 0.57 | Volt | 100 % |
| anode | — | ocv_open_circuit_voltage | 0.6418 | Volt | 100 % |
| anode | — | ocv_open_circuit_voltage | 0.4933 | Volt | 100 % |
| anode | — | ocv_open_circuit_voltage | 0.6542 | Volt | 100 % |
Extraktionspipeline
Rohextraktionen, Artefakte, Qualitätssignal
Extraktionsqualität
EhrlichkeitssignalBemessen Sie Ihr Vertrauen in die extrahierten Inhalte an diesen Signalen – so hat die Pipeline ihre eigene Ausgabe für diese Publikation bewertet.
Parametervollständigkeit
50 %
Anteil der erwarteten Parameter, die extrahiert wurden
Datenvollständigkeit
50 %
Gesamtabdeckung der Extraktion über alle Felder
KI-Konfidenz
70 %
Vom Modell selbst angegebene Konfidenz
Mittlere Parameterkonfidenz
75 %
Durchschnittliche Konfidenz der oben angezeigten PaperParameter-Zeilen
vor dem Zitieren mit dem Quell-PDF abgleichen · Werte 0–1
Diagramm-Explorer
Verändern Sie die Eingaben dieser Publikation und sehen Sie, wie sich das vorhergesagte Ergebnis verschiebt.
Modell erkunden
Der Reaktor in 3D, mit Strömung, die sich ein- und ausschalten lässt.
KI-Erkenntnisse
Widersprüche, Lücken und Chancen aus dem Vergleich dieser Publikation mit dem Korpus.
Ähnliche Publikationen vergleichen
Die nächsten Publikationen nach System, Materialien und Organismen, mit ihren Ergebnissen nebeneinander.
Quell-PDF
Die Publikation, wie sie erschienen ist.
Repräsentatives Modell: Einkammer-MFC mit Luftkathode
Zum Interagieren tippenRepräsentatives Modell: Einkammer-MFC mit Luftkathode
Repräsentatives Modell: Einkammer-MFC mit Luftkathode – zugeordnet anhand der berichteten Konfiguration der Publikation, nicht ihrer genauen Geometrie.
In diesem Datensatz
Organismen, Parameter und Materialien, die diese Publikation berichtet. Jeder Eintrag verweist auf seine Seite.
Materialien · 3
Schlagwörter
- Microbial fuel cell
- Anode
- Surface roughness
- Electrode
- Surface finish
- Scanning electron microscope
Zitieren
Thuschapol Kulchartvijit, Chamaporn Chianrabutra, Sirapan Sukontasing et al. (2022). The Effects of Surface Roughness of the Stainless-Steel Anode on Electricity Enhancement of Microbial Fuel Cell. Trends in Sciences. https://doi.org/10.48048/tis.2022.3680
- Zeitschrift
- Trends in Sciences
Öffnen Sie das Modell im Labor, um alle Steuerelemente, die Parameterbearbeitung und Vorlagen-Overlays zu nutzen.
Im Labor öffnen