Forschungsdaten – Titel und Zusammenfassungen von Publikationen, extrahierte Daten und Katalogeinträge – erscheinen in ihrer Originalsprache Englisch.
Publikation · MFC
Performance of cobalt oxide/carbon cloth composite electrode in energy generation from dairy wastewater using microbial fuel cells
Zusammenfassung
Was die Publikation berichtet, in ihren eigenen Worten.
Zusammenfassung
Abstract The use of non-noble metal catalyst as electrode for energy harvesting device have drawn great deal of attention owing to its distinct features. In this work, cobalt oxide has been directly fabricated on carbon cloth substrates using simple cost effective Successive Ionic Layer Adsorption and Reaction. Cobalt oxide synthesized from Co (II) nitrate and NaOH was used as the electrode for generation of electricity from dairy wastes using Microbial Fuel Cells (MFC). Electrochemical characteristics such as cyclic voltammetry have been carried out for the cobalt oxide/carbon cloth and the obtained results are found to be a good alternative for platinum catalyst. A current of 0.15 mA was obtained at an external resistance of 2 kΏ. A single cell prototype of double chamber MFC is designed and the performance analysis is carried out in this work.
KI-Zusammenfassung
65 % KonfidenzThis paper demonstrates a double-chamber MFC using cobalt oxide-coated carbon cloth electrodes for dairy wastewater treatment and power generation. The cobalt oxide coating improved open-circuit voltage from 370 mV (plain carbon) to 750 mV and achieved a peak power density of 170 mW m⁻² at 0.1 M potassium ferricyanide catholyte concentration. The work focuses on electrode material optimization and cathode catholyte concentration effects, but does not address nitrogen cycling, denitrification, nitrification, ammonia recovery, or N₂O dynamics—critical parameters for MES-based wastewater treatment.
Zentrale Erkenntnisse
Leistung Cobalt oxide coating doubled open-circuit voltage from 370 mV to 750 mV, demonstrating that non-noble metal catalysts can substantially improve MFC electrochemical performance.
Was heißt das. Electrode material selection is a primary lever for improving MFC voltage output; cobalt oxide offers a cost-effective alternative to platinum for both anode and cathode applications.
Schwellenwert Peak power density of 170 mW m⁻² occurred at 0.1 M potassium ferricyanide concentration; higher concentrations (1.5 M) caused voltage depletion.
Was heißt das. Catholyte concentration exhibits a non-monotonic relationship with power output; operators must identify and maintain an optimal window (0.1 M in this case) rather than assuming higher concentration always improves performance.
Schwellenwert Power density increased with current density up to 80 mW m⁻² then decayed, indicating a critical current density threshold beyond which performance degrades.
Was heißt das. Operating beyond the critical current density (6.3 mA m⁻² in this system) reduces power output; design and control strategies should target the peak rather than maximize current.
Zielkonflikt Current and voltage are inversely proportional across external resistance range (50 Ω to 2 kΩ), with maximum current of 2.5 mA at 0.1 kΩ and maximum voltage of 560 mV at 2 kΩ.
Was heißt das. Load resistance selection determines whether the MFC operates in current-maximizing or voltage-maximizing mode; application requirements (sensor power vs. energy harvesting) should drive resistance choice.
Ansatzpunkte6
Konkrete Lücken in dieser Publikation, jeweils mit einem Experiment, das sie schließen würde.
Hoch No measurement of nitrogen species (NO₃⁻, NO₂⁻, NH₄⁺, N₂O) in influent or effluent despite dairy wastewater being nitrogen-rich.
Dairy wastewater typically contains 200–500 mg N L⁻¹ (organic and inorganic nitrogen), yet the paper reports only COD (1200–1589 mg L⁻¹), BOD (850–983 mg L⁻¹), and TDS (1000–1200 mg L⁻¹). No nitrogen balance or removal efficiency is provided, making it impossible to assess whether the MFC is performing denitrification, nitrification, or ammonia recovery.
Versuch. Measure influent and effluent total nitrogen (TN), ammonia (NH₄⁺-N), nitrate (NO₃⁻-N), nitrite (NO₂⁻-N), and dissolved N₂O at steady state and during voltage decay cycles; calculate nitrogen removal efficiency and speciation.
Hoch No investigation of anode or cathode potential (vs. SHE or Ag/AgCl) during operation; only external resistance and open-circuit voltage reported.
Cathode potential determines which electron acceptor is reduced (O₂ reduction, NO₃⁻ reduction, N₂O reduction, or ferricyanide reduction). The paper uses potassium ferricyanide as the electron acceptor but does not measure or control cathode potential, making it impossible to predict or optimize nitrogen cycling pathways.
Versuch. Install reference electrode (Ag/AgCl or SHE) in both chambers; measure anode and cathode potential vs. reference during polarization curves and catholyte concentration variation; correlate potential windows with nitrogen species production/consumption.
Mittel No measurement of dissolved oxygen (DO) in cathode chamber despite aerobic conditions being mentioned.
The cathode chamber is described as 'supplied with open air' but DO concentration is not reported. DO level determines whether oxygen reduction or alternative electron acceptor reduction (e.g., NO₃⁻) dominates at the cathode, directly affecting nitrogen cycling.
Versuch. Measure dissolved oxygen concentration in cathode chamber over time; vary aeration rate and measure impact on voltage, current, and nitrogen species profiles.
Mittel No variation of hydraulic retention time (HRT) or organic loading rate (OLR) despite these being critical for nitrogen removal in bioelectrochemical systems.
The paper refills the MFC with fresh wastewater after voltage drops to 60 mV (~20 h operation) but does not systematically vary HRT or OLR. Nitrogen removal efficiency typically depends on HRT; shorter HRT favors nitrification while longer HRT favors denitrification.
Versuch. Operate MFC at fixed HRT values (e.g., 12, 24, 48 h) while maintaining constant OLR; measure nitrogen species removal and power output as functions of HRT.
Mittel No measurement of pH in anode or cathode chamber during operation; only initial pH of 7.5 reported for catholyte.
Anode pH typically drops during operation (acidification) while cathode pH rises (alkalinization), affecting nitrification (optimal pH 7–8) and denitrification (optimal pH 6.5–7.5) rates. The paper does not track pH dynamics, limiting ability to predict nitrogen cycling performance.
Versuch. Continuously monitor anode and cathode pH during polarization and catholyte concentration variation experiments; correlate pH changes with nitrogen species production.
Niedrig No investigation of microbial community composition or metabolic pathways despite using mixed culture from dairy wastewater.
The paper states 'Bacteria in the dairy wastewater are utilized as the biocatalysts' but provides no 16S rRNA sequencing, metabolic profiling, or identification of nitrifiers, denitrifiers, or other nitrogen-cycling microorganisms. This limits mechanistic understanding of nitrogen transformations.
Versuch. Perform 16S rRNA gene sequencing on anode biofilm and bulk liquid at steady state and after catholyte concentration changes; identify nitrifiers (Nitrosomonas, Nitrobacter) and denitrifiers (Paracoccus, Pseudomonas); correlate community shifts with nitrogen species dynamics.
Erstellt von der MESSAI-Extraktionspipeline · mit dem Quell-PDF abgleichen
Extrahierte Werte
Jeder aus der Publikation entnommene Wert mit seiner Quelle, damit sich jede Zahl am Text prüfen lässt.
n = 2 extrahierte Werte
Wählen Sie eine Quellenangabe, um Zitat, Seite und Konfidenz hinter einem Wert zu sehen.
0 von 1 extrahierten Zeilen modellierbar
- 1 nicht kanonisiert (kein kanonischer Slug)
| Parameter | Wert | Einheit | Konfidenz | Quelle | Modellierbar |
|---|---|---|---|---|---|
| Substrate | wastewater | — | 80 % | llm | |
| Electrode material | carbon cloth | — | 50 % | extrahiert | Ausgeschlossen: nicht kanonisiert (kein kanonischer Slug) |
Methodik
Welches System und wie es betrieben wurde
Methodik
Methodology
Double-chamber MFC with plexiglass construction (500 mL total volume, 270 mL anode chamber) separated by Nafion proton-exchange membrane. Cobalt oxide-coated carbon cloth electrodes (156 mg cm⁻² loading via 25-cycle SILAR) used in both anode and cathode. Dairy wastewater inoculum (COD 1200–1589 mg L⁻¹, BOD 850–983 mg L⁻¹, pH 7.0–8.5) supplied to anode under anaerobic conditions (N₂ purge); potassium ferricyanide (0.05–1.5 M) supplied to cathode with phosphate buffer. Voltage measured every 30 min across external resistances (50 Ω to 2 kΩ); current, power, and power density calculated via Ohm's law. Cyclic voltammetry performed at 0.10 V s⁻¹ scan rate. Polarization and power density curves generated by varying external resistance.
Systemkonfiguration
| Feld | Wert |
|---|---|
| reactor type | MFC |
| chamber config | 2-chamber |
Elektrodenspezifikationen
| Feld | Wert |
|---|---|
| materials | ["carbon cloth","platinum"] |
Leistungskennzahlen
| Feld | Wert |
|---|---|
| citation count | 15 |
Betriebsparameter
| Feld | Wert |
|---|---|
| substrate | ["wastewater"] |
Ergebnisse
Was gemessen wurde und was funktioniert hat
Elektrochemie
2 Konstanten| Elektrode | Reaktion | Parameter | Wert | Einheit | Konf. |
|---|---|---|---|---|---|
| whole_cell | — | ocv_open_circuit_voltage | 370 | Millivolt | 100 % |
| whole_cell | — | ocv_open_circuit_voltage | 750 | Millivolt | 100 % |
Extraktionspipeline
Rohextraktionen, Artefakte, Qualitätssignal
Extraktionsqualität
EhrlichkeitssignalBemessen Sie Ihr Vertrauen in die extrahierten Inhalte an diesen Signalen – so hat die Pipeline ihre eigene Ausgabe für diese Publikation bewertet.
Parametervollständigkeit
38 %
Anteil der erwarteten Parameter, die extrahiert wurden
Datenvollständigkeit
50 %
Gesamtabdeckung der Extraktion über alle Felder
KI-Konfidenz
65 %
Vom Modell selbst angegebene Konfidenz
Mittlere Parameterkonfidenz
65 %
Durchschnittliche Konfidenz der oben angezeigten PaperParameter-Zeilen
vor dem Zitieren mit dem Quell-PDF abgleichen · Werte 0–1
Diagramm-Explorer
Verändern Sie die Eingaben dieser Publikation und sehen Sie, wie sich das vorhergesagte Ergebnis verschiebt.
Modell erkunden
Der Reaktor in 3D, mit Strömung, die sich ein- und ausschalten lässt.
KI-Erkenntnisse
Widersprüche, Lücken und Chancen aus dem Vergleich dieser Publikation mit dem Korpus.
Ähnliche Publikationen vergleichen
Die nächsten Publikationen nach System, Materialien und Organismen, mit ihren Ergebnissen nebeneinander.
Quell-PDF
Die Publikation, wie sie erschienen ist.
Repräsentatives Modell, generisches MFC
Zum Interagieren tippenRepräsentatives Modell, generisches MFC
Repräsentatives Modell: MFC – zugeordnet nur anhand des Systemtyps der Publikation, nicht ihres Reaktors oder ihrer Geometrie.
Schlagwörter
- Microbial fuel cell
- Cobalt
- Cobalt oxide
- Cyclic voltammetry
- Electrode
- Carbon fibers
Zitieren
Vinothkumar Veeramani, Kanimozhi Rajangam, Jaya Nagendran (2020). Performance of cobalt oxide/carbon cloth composite electrode in energy generation from dairy wastewater using microbial fuel cells. Sustainable Environment Research. https://doi.org/10.1186/s42834-020-00058-4
- Zeitschrift
- Sustainable Environment Research
Öffnen Sie das Modell im Labor, um alle Steuerelemente, die Parameterbearbeitung und Vorlagen-Overlays zu nutzen.
Im Labor öffnen