Forschungsdaten – Titel und Zusammenfassungen von Publikationen, extrahierte Daten und Katalogeinträge – erscheinen in ihrer Originalsprache Englisch.

Forschung

Publikation · MFC

Impact of anodophilic biofilm bioelectroactivity on denitrification behavior of single-chamber air-cathode microbial fuel cell in steady state

01

Zusammenfassung

Was die Publikation berichtet, in ihren eigenen Worten.

Interaktives 3D-ModellKI-angereichert· 82 %

Zusammenfassung

Generally, high bioelectroactivity of anodophilic biofilm favors high power generation of microbial fuel cell (MFC), however, it is not clear whether it can promote denitrification of MFC synchronously. In this study, the impact of anodophilic biofilms bioelectroactivity on denitrification behavior of single-chamber air-cathode MFC (SAMFC) in steady state was studied for the first time. Anodophilic biofilms of various bioelectroactivity were acclimated at conditions of open circuit (OC), Rext of 1000Ω and 20Ω (denoted as SAMFC-OC, SAMFC-1000Ω and SAMFC-20Ω, respectively) and run for 100 days in the presence of nitrate. Electrochemical tests and microbial analysis results showed that the anode of the SAMFC-20Ω delivered higher oxidation and denitrification current response and had a higher abundance of electroactive bacteria, like Geobacter, Pseudomonas and Comamonas, which possessed bidirectional electron transfer function, demonstrating a higher bioelectroactivity of the anodophilic biofilm. Moreover, these electroactive bacteria favored the accumulation of denitrifers, like Thauera and Alicycliphilus, probably by consuming trace oxygen through catalyzing oxygen reduction. The SAMFC-20Ω not only delivered a 61.7% higher power than the SAMFC-1000Ω, but also achieved a stable and high denitrification rate constant (kDN) of 1.9, which was 50% and 40% higher than that of the SAMFC-OC and SAMFC-1000Ω, respectively. It could be concluded that the high bioelectroactivity of the anodophilic biofilms not only favored high power generation of the SAMFC, but also promote the growth of denitrifers at the anodes and strengthened denitrification. This study provided an effective method and important theoretical basis for enhancing power generation and denitrification performance of the SAMFC synchronously.

KI-Zusammenfassung

82 % Konfidenz

Zentrale Erkenntnisse

  • Schwellenwert Lower external resistance (20Ω) initially suppressed denitrification at day 20 (kDN=1.07 vs 1.26 at 1000Ω) but surpassed it by day 40 and stabilized at kDN=1.9 by day 80, indicating a delayed but superior long-term denitrification trajectory.

    Was heißt das. Operators should not judge denitrification performance in SAMFCs before 40–80 days of acclimation under low-resistance operation; early transient suppression does not predict steady-state performance.

  • Mechanismus Anode potential at 20Ω was −0.09 V (vs −0.369 V at 1000Ω and −0.386 V at OC) during concurrent acetate oxidation and nitrate reduction, creating a mixed-potential platform lasting ~3.6 h that correlates with nitrate depletion kinetics.

    Was heißt das. Anode potential plateaus can serve as real-time electrochemical signals for nitrate depletion monitoring without chemical analysis, enabling adaptive feeding strategies.

  • Mechanismus Exoelectrogens (Geobacter, Pseudomonas, Comamonas) at 20Ω reached 18.9% relative abundance by day 100, three times higher than 1000Ω (5.7%) and five times higher than OC (3.8%), and directly enabled both bioelectrochemical denitrification and oxygen reduction to suppress trace O₂ diffusion.

    Was heißt das. Design SAMFCs with low external resistance to enrich bidirectional exoelectrogens; their oxygen-scavenging activity is a key mechanism for creating anoxic niches that support obligate denitrifiers.

  • Schwellenwert Optimal C/N weight ratio was 2.4 (acetate:NO₃⁻-N), above which denitrification performance plateaued; this aligns with literature value of 2.2 but was not systematically varied across the three resistance conditions.

    Was heißt das. Maintain C/N ≥2.4 in fed-batch SAMFC operation; however, test whether optimal C/N shifts with external resistance or biofilm maturity.

  • Schwellenwert Denitrification rate constant increased monotonically from day 20 to day 100 in all three conditions, with SAMFC-20Ω stabilizing at kDN=1.9 after day 80, suggesting biofilm maturation rather than electrochemical regime change as the rate-limiting factor in steady state.

    Was heißt das. Plan for 80+ day startup periods in full-scale SAMFC denitrification systems; early performance metrics will underestimate long-term capacity.

Widersprüche1

Nur Konflikte, die die Publikation selbst zeigt, jeweils am Text geprüft.

  • Innerhalb der Publikation Early denitrification performance at low external resistance contradicts long-term performance trajectory

    Eine Seite

    At day 20, SAMFC-20Ω had lower kDN (1.07) than SAMFC-1000Ω (1.26)

    “the SAMFC-20Ω possess a low kDN of 1.07, which is lower than that of the SAMFC-1000Ω (of 1.26) at the 20th day”
    Andere Seite

    By day 40 and thereafter, SAMFC-20Ω surpassed SAMFC-1000Ω and achieved kDN=1.9 at day 100 vs kDN≈1.3 for SAMFC-1000Ω

    “the denitrification rate of the SAMFC-20Ω outperforms that of the SAMFC-1000Ω and SAMFC-OC from the 40th day and achieves a stable denitrification rate with a high kDN of 1.9 after acclimation for 80 days”

    Einordnung der Autoren. Authors attribute early suppression to electron competition between denitrification and oxygen reduction at the cathode in the high-current 20Ω regime; once exoelectrogens mature and consume trace O₂, denitrifiers accumulate and outperform. This is a maturation-driven regime shift, not a contradiction.

Ansatzpunkte6

Konkrete Lücken in dieser Publikation, jeweils mit einem Experiment, das sie schließen würde.

  • Mittel No systematic variation of C/N ratio across the three external resistance conditions; optimal C/N may shift with biofilm composition and current density

    C/N optimization (Figure S2) was performed only at one resistance condition; the paper states 'The denitrification performance tests in following are based on the media with a C/N ratio of 2.4' without testing whether 20Ω or OC conditions require different ratios

    Versuch. Test C/N = 1.2, 2.4, 3.0 at each of the three external resistances (OC, 1000Ω, 20Ω) and measure kDN and NO₃⁻-N removal over 5 h cycles

  • Hoch No measurement of dissolved oxygen (DO) concentration in the bulk liquid or biofilm microenvironment; oxygen scavenging by exoelectrogens is inferred but not quantified

    The mechanism proposed is that exoelectrogens consume trace O₂ to create anoxic niches for denitrifiers, but DO is never measured. Text states 'exoelectrogens are also able to catalyze oxygen reduction reaction, thus they could consume the trace oxygen diffused from the air-cathode' without supporting data

    Versuch. Use oxygen microsensors or fluorescent DO probes to measure O₂ gradients in the biofilm at 20Ω vs. 1000Ω vs. OC, and correlate with denitrifier abundance and kDN

  • Hoch No measurement of nitrite (NO₂⁻) accumulation or N₂O production; only NO₃⁻-N removal is tracked

    The paper measures NO₃⁻-N concentration but does not report NO₂⁻ or N₂O, which are critical intermediates and potential pollutants in denitrification. Text states 'Three different SSAMFCs were sampled at 1h, 2h, 3h, 4h and 5h and immediately filtered through disposable Millipore filter with the pore size of 0.22μm for the analyses of nitrate, nitrite' but only nitrate results are shown

    Versuch. Measure NO₂⁻ and N₂O (via gas chromatography or ion chromatography) at each time point (1–5 h) for all three resistance conditions at days 20, 60, 100 to assess denitrification pathway selectivity

  • Mittel No variation of anode potential or cathode potential independently; only external resistance is varied, which indirectly controls potentials

    The paper shows anode potentials range from −0.09 V (20Ω) to −0.386 V (OC), but does not test fixed anode or cathode potentials to isolate electrochemical effects from biofilm composition effects

    Versuch. Use potentiostat to fix anode potential at −0.1, −0.3, −0.5 V vs. Ag/AgCl while measuring denitrification rate and exoelectrogen abundance over 60 days

  • Mittel No measurement of hydraulic retention time (HRT) or substrate loading rate; fed-batch mode with fixed medium refresh timing may not reflect continuous-flow operation

    The paper operates in fed-batch mode with medium refreshed when anode potential rises above 0 V, but does not report actual HRT or test different feeding frequencies. Practical wastewater treatment requires continuous or semi-continuous flow

    Versuch. Operate SAMFC-20Ω in continuous-flow mode at HRTs of 12, 24, 48 h with constant NO₃⁻-N loading (200 mg/L) and measure kDN and power output

  • Niedrig No investigation of catholyte pH or buffering capacity; all experiments use 50 mM phosphate buffer but pH is not reported or varied

    Denitrification and oxygen reduction both consume or produce protons; pH can affect enzyme kinetics and biofilm structure. Text does not report pH measurements or pH drift over 100 days

    Versuch. Monitor pH in bulk liquid and biofilm at days 0, 20, 60, 100 for all three conditions; test pH 6.5–8.0 range at 20Ω to assess impact on kDN and microbial community

Erstellt von der MESSAI-Extraktionspipeline · mit dem Quell-PDF abgleichen

02

Extrahierte Werte

Jeder aus der Publikation entnommene Wert mit seiner Quelle, damit sich jede Zahl am Text prüfen lässt.

n = 5 extrahierte Werte

Wählen Sie eine Quellenangabe, um Zitat, Seite und Konfidenz hinter einem Wert zu sehen.

0 von 5 extrahierten Zeilen modellierbar

  • 3 nicht kanonisiert (kein kanonischer Slug)
  • 2 kein SI-Wert
ParameterWertEinheitKonfidenzQuelleModellierbar
Reactor typesingle-chamber—80 %
extrahiert
Ausgeschlossen: nicht kanonisiert (kein kanonischer Slug)
Chambers1—80 %
extrahiert
Ausgeschlossen: nicht kanonisiert (kein kanonischer Slug)
Cathode material×2air-cathode—60 %
extrahiert
Ausgeschlossen: kein SI-Wert
Microbial communityfavored the accumulation of denitrifers—50 %
extrahiert
Ausgeschlossen: nicht kanonisiert (kein kanonischer Slug)

Methodik

Welches System und wie es betrieben wurde

Methodik

Methodology

Three SAMFCs (84 mL cube, graphite brush anode, air-cathode with activated carbon catalyst) were operated in fed-batch mode at 35±1°C under three external resistance conditions (open circuit, 1000Ω, 20Ω) for 100 days. Biofilms were acclimated first with acetate (1280 mg/L COD) for 30 days, then with acetate + nitrate (200 mg/L NO₃⁻-N, C/N=2.4) for 70 days. Anode potential and cell voltage were logged every 5 min. NO₃⁻-N concentration was measured at days 20, 40, 60, 80, 100 using spectrophotometry. Bioelectroactivity was assessed via cyclic voltammetry (CV) at days 0, 20, 100 in turnover (acetate or nitrate present) and non-turnover (no substrate) conditions. Microbial community composition was determined by 16S rRNA high-throughput sequencing at days 0, 20, 100.

Systemkonfiguration

FeldWert
reactor typeMFC
chamber config1-chamber

Biologische Parameter

FeldWert
microbial communityfavored the accumulation of denitrifers

Extraktionspipeline

Rohextraktionen, Artefakte, Qualitätssignal

Extraktionsqualität

Ehrlichkeitssignal

Bemessen Sie Ihr Vertrauen in die extrahierten Inhalte an diesen Signalen – so hat die Pipeline ihre eigene Ausgabe für diese Publikation bewertet.

Parametervollständigkeit

25 %

Anteil der erwarteten Parameter, die extrahiert wurden

Datenvollständigkeit

40 %

Gesamtabdeckung der Extraktion über alle Felder

KI-Konfidenz

82 %

Vom Modell selbst angegebene Konfidenz

Mittlere Parameterkonfidenz

64 %

Durchschnittliche Konfidenz der oben angezeigten PaperParameter-Zeilen

vor dem Zitieren mit dem Quell-PDF abgleichen · Werte 0–1

03

Diagramm-Explorer

Verändern Sie die Eingaben dieser Publikation und sehen Sie, wie sich das vorhergesagte Ergebnis verschiebt.

04

Modell erkunden

Der Reaktor in 3D, mit Strömung, die sich ein- und ausschalten lässt.

05

KI-Erkenntnisse

Widersprüche, Lücken und Chancen aus dem Vergleich dieser Publikation mit dem Korpus.

06

Ähnliche Publikationen vergleichen

Die nächsten Publikationen nach System, Materialien und Organismen, mit ihren Ergebnissen nebeneinander.

07

Quell-PDF

Die Publikation, wie sie erschienen ist.

3D-Modell wird geladen …

Repräsentatives Modell, generisches MFC

Repräsentatives Modell: MFC – zugeordnet nur anhand des Systemtyps der Publikation, nicht ihres Reaktors oder ihrer Geometrie.

MFC
System
5
Extrahierte Werte
2021
Jahr

In diesem Datensatz

Organismen, Parameter und Materialien, die diese Publikation berichtet. Jeder Eintrag verweist auf seine Seite.

Organismen · 5

Schlagwörter

  • Microbial fuel cell
  • Denitrification
  • Biofilm
  • Geobacter
  • Anode
  • Cathode

Zitieren

Wenjuan Zhao, YiZhao Gao, Yongli Zhao et al. (2021). Impact of anodophilic biofilm bioelectroactivity on denitrification behavior of single-chamber air-cathode microbial fuel cell in steady state. https://doi.org/10.22541/au.162963540.03994279/v1

Zeitschrift
Zeitschrift nicht erfasst

Öffnen Sie das Modell im Labor, um alle Steuerelemente, die Parameterbearbeitung und Vorlagen-Overlays zu nutzen.

Im Labor öffnen