Forschungsdaten – Titel und Zusammenfassungen von Publikationen, extrahierte Daten und Katalogeinträge – erscheinen in ihrer Originalsprache Englisch.

Forschung

Publikation · MFC

Double Chamber MFC with Non-PGM F-C-N Cathode Catalyst

01

Zusammenfassung

Was die Publikation berichtet, in ihren eigenen Worten.

Interaktives 3D-ModellKI-angereichert· 70 %

Zusammenfassung

Due to the high cost of wastewater treatement, new and alternative low cost technologies need to be investigated. Bioelectrochemical systems and particularly microbial fuel cells (MFCs) seem to address positively this problem. In MFCs the organic waste is utilized as a fuel that is oxidised from microorganisms through their metabolism generating electricity. The main problem related with MFCs utilization is the small electricity production and high cost of the electrodes materials. These are the major reasons why MFCs are not commercialized in a large scale yet. In order to overcome the high cost, that is mainly related to the high price of the noble metals used as catalysts at the cathode, inexpensive catalysts for oxygen reduction reaction (ORR) should be explored. These catalysts belong to the group of non platinum based catalyst that are proved as very active towards ORR. This work focused on the utilization of a low cost non-PGM (Fe-Aminoantipyrine) catalyst explored in the design of oxygen reducing cathode for MFCs application. The activity of this catalyst was characterized electrochemically in a three-electrode configuration varying the pH of the electroyte. Then the cathodes were introduced in double chamber MFC (Figure 1) with the cathode completely immersed in the solution. The two compartments (125 ml) of the MFC were separated by proton-exchange membrane (Nafion 211). The anode composed of carbon brush (6x4 cm projected surface area) pre-colonized with mixed cultured bacteria. The anode chamber was filled with 50% in volume PBS (50 mM) and 50% in volume of activated sludge (pH=7.5±0.1). The non-PGM cathode (2.3 x 2.3 cm geometric area) was immersed in solution with different pHs (6, 7.5, 9 and 11) and purged with air for oxygen supply. The MFCs performance was investigated at different pHs in order to simulate possible industrial wastes with pHs different than neutral. The catalyst used in this work was synthesized by modified sacrificial support method which was developed at UNM 1 . In general, the metal precursor (iron nitrate) and nitrogen-containing low-molecular weight organic precursor (4-aminoantipiryne) are deposited on the surface of fumed silica (surface area ~120 m -2 g -1 ). the obtained composite material is heat treated in nitrogen atmosphere at T=950 ° C. After heat treatment fumed silica was removed by excess amount of HF. Potentiodynamic polarizations curve of the anode and the cathode separately were carried out using platinum mesh as a counter and a Ag/AgCl (3M KCl) as reference electrodes with scan rate 0.2 mV/s. MFC overall polarization curves were measured using a potentiostat with a scan rate of 1 mV/s. Power curves were determined using Ohm`s law (P= V x I). The electrochemical measurements of the cathode as a result of differences in the electrolyte pH showed highest electrocatalytic activity of the catalyst at lower pHs. This confirms our previous observation for the dependance of the Fe-AAPyr activity from the electrolyte pH 2 . The polarization and power curves (Figure 2) of the whole MFCs followed the same trend as the cathode polarization curves showing the dominating role of the cathode over the MFCs performance. The MFCs with low pH of the catholyte demonstrated the highest power (200 μW) and the highest open circuit voltage (OCV = 850 mV). This study demonstrated the applicability of non-PGM catalyst for the development of cathodes for MFC application. Further studies with improved MFCs design should be performed. Long-term operation test will be carried out investigating the influence of the wastewater pollutants on the cathode and subsequently the whole MFC operation and output. References A. Serov, U. Martinez, A. Falase, P. Atanassov, Electrochem. Comm. 22 (2012) 193-196. S. Brocato, A. Serov, P. Atanassov Electrochim. Acta, 87 (2013) 361-365

KI-Zusammenfassung: entspricht dem Abstract (70 % Konfidenz) · mit dem Quell-PDF abgleichen

Zentrale Ergebnisse

  • The anode chamber was filled with 50% in volume PBS (50 mM) and 50% in volume of activated sludge (pH=7.
  • 5, 9 and 11) and purged with air for oxygen supply.
02

Extrahierte Werte

Jeder aus der Publikation entnommene Wert mit seiner Quelle, damit sich jede Zahl am Text prüfen lässt.

n = 11 extrahierte Werte

Wählen Sie eine Quellenangabe, um Zitat, Seite und Konfidenz hinter einem Wert zu sehen.

0 von 8 extrahierten Zeilen modellierbar

  • 2 nicht kanonisiert (kein kanonischer Slug)
  • 6 kein SI-Wert
ParameterWertEinheitKonfidenzQuelleModellierbar
Substratewastewater—80 %
llm
Voltage[object Object]V80 %
llm
Scan rate[object Object]mV/s80 %
llm
Membrane materialNafion—80 %
extrahiert
Ausgeschlossen: kein SI-Wert
Cathode materialcatalyst—70 %
extrahiert
Ausgeschlossen: kein SI-Wert
Electrode materialcarbon brush—50 %
extrahiert
Ausgeschlossen: nicht kanonisiert (kein kanonischer Slug)
Microbial communitythe anode chamber was filled with 50% in volume pbs (50 mm) and 50% in volume of activated sludge (ph=7—50 %
extrahiert
Ausgeschlossen: nicht kanonisiert (kein kanonischer Slug)
Membrane materialNafion 211—50 %
extrahiert
Ausgeschlossen: kein SI-Wert
Anode materialcarbon brush—50 %
extrahiert
Ausgeschlossen: kein SI-Wert
Cathode materialFe-Aminoantipyrine (Fe-AAPyr)—50 %
extrahiert
Ausgeschlossen: kein SI-Wert
pH7,5—50 %
extrahiert
Ausgeschlossen: kein SI-Wert

Methodik

Welches System und wie es betrieben wurde

Methodik

Methodology

The researchers designed a double chamber microbial fuel cell (MFC) with a non-precious metal (non-PGM) F-C-N cathode catalyst to reduce the cost of MFCs.

Systemkonfiguration

FeldWert
system typeMFC

Elektrodenspezifikationen

FeldWert
materials["carbon brush","platinum"]

Biologische Parameter

FeldWert
dominant speciesrelated to the high price of the noble metals used as catalysts at the cathode
microbial communitythe anode chamber was filled with 50% in volume pbs (50 mm) and 50% in volume of activated sludge (ph=7

Leistungskennzahlen

FeldWert
voltage{"value":1,"unit":"mV"}

Betriebsparameter

FeldWert
substrate["wastewater"]

Elektrochemische Daten

FeldWert
scan rate{"value":null,"unit":"mV/s"}

Ergebnisse

Was gemessen wurde und was funktioniert hat

Kernaussagen

Voltage

Elektrochemie

{"value":1,"unit":"mV"}Volt

Extraktionspipeline

Rohextraktionen, Artefakte, Qualitätssignal

Extraktionsqualität

Ehrlichkeitssignal

Bemessen Sie Ihr Vertrauen in die extrahierten Inhalte an diesen Signalen – so hat die Pipeline ihre eigene Ausgabe für diese Publikation bewertet.

Parametervollständigkeit

75 %

Anteil der erwarteten Parameter, die extrahiert wurden

Datenvollständigkeit

70 %

Gesamtabdeckung der Extraktion über alle Felder

KI-Konfidenz

70 %

Vom Modell selbst angegebene Konfidenz

Mittlere Parameterkonfidenz

63 %

Durchschnittliche Konfidenz der oben angezeigten PaperParameter-Zeilen

vor dem Zitieren mit dem Quell-PDF abgleichen · Werte 0–1

03

Diagramm-Explorer

Verändern Sie die Eingaben dieser Publikation und sehen Sie, wie sich das vorhergesagte Ergebnis verschiebt.

04

Modell erkunden

Der Reaktor in 3D, mit Strömung, die sich ein- und ausschalten lässt.

05

KI-Erkenntnisse

Widersprüche, Lücken und Chancen aus dem Vergleich dieser Publikation mit dem Korpus.

06

Ähnliche Publikationen vergleichen

Die nächsten Publikationen nach System, Materialien und Organismen, mit ihren Ergebnissen nebeneinander.

3D-Modell wird geladen …

Repräsentatives Modell, generisches MFC

Repräsentatives Modell: MFC – zugeordnet nur anhand des Systemtyps der Publikation, nicht ihres Reaktors oder ihrer Geometrie.

MFC
System
11
Extrahierte Werte
2014
Jahr

Schlagwörter

  • Microbial fuel cell
  • Anode
  • Cathode
  • Catalysis
  • Chemical engineering
  • Wastewater

Zitieren

Carlo Santoro, Claudia W. Narvaez Villarubia, Sarah Stariha et al. (2014). Double Chamber MFC with Non-PGM F-C-N Cathode Catalyst. ECS Meeting Abstracts. https://doi.org/10.1149/ma2014-01/22/1013

Öffnen Sie das Modell im Labor, um alle Steuerelemente, die Parameterbearbeitung und Vorlagen-Overlays zu nutzen.

Im Labor öffnen