Forschungsdaten – Titel und Zusammenfassungen von Publikationen, extrahierte Daten und Katalogeinträge – erscheinen in ihrer Originalsprache Englisch.

Forschung

Publikation · MDC

Current-driven nitrate migration out of groundwater by using a bioelectrochemical system

01

Zusammenfassung

Was die Publikation berichtet, in ihren eigenen Worten.

Interaktives 3D-ModellKI-angereichert· 82 %

KI-Zusammenfassung

82 % Konfidenz

This paper demonstrates a bioelectrochemical system (BES) for nitrate removal from groundwater using electromigration rather than biological reduction. The system uses a tubular design with cation and anion exchange membranes to concentrate nitrate ions in a central chamber while preventing contamination from the anode. Key findings show that nitrate removal is primarily driven by electric current (28–33.6 A/m³ at 0.8 V applied), but hydroxide ions generated at the cathode compete strongly with nitrate for anion transport, limiting charge transfer efficiency to ~25%. Water consumption and pH changes present practical challenges for field deployment.

Zentrale Erkenntnisse

  • Mechanismus Nitrate removal is electromigration-driven, not biological: 18.9 ± 0.6 mg NO₃⁻–N accumulated in the concentrating chamber matched 18.1 ± 0.3 mg lost from groundwater, with no evidence of reduction to lower oxidation states.

    Was heißt das. Do not expect denitrification in the concentrating chamber; plan for a separate reduction step if complete N removal is required, or accept nitrate concentration as the endpoint.

  • Mechanismus Hydroxide ions are a major competitor with nitrate for anion transport: OH⁻ accumulated at ~2.5 × 10⁻³ mol versus 1.3 × 10⁻³–2.1 × 10⁻⁵ mol NO₃⁻, reducing charge transfer efficiency to 25.1 ± 6.3%.

    Was heißt das. Expect only ~25% of current to drive nitrate transport; the rest moves OH⁻. Consider cathode modifications (e.g., oxygen reduction instead of H⁺ reduction) to reduce OH⁻ generation.

  • Zielkonflikt Reducing concentrating chamber flow rate from 0.7 to 0.1 mL/min (HRT 6 to 42 h) decreased water consumption per mg NO₃⁻–N from 35.9 ± 3.6 to 5.2 ± 0.39 mL, but increased pH and nitrate concentration in the chamber, creating a larger concentration gradient opposing further migration.

    Was heißt das. Optimize HRT as a trade-off: longer HRT saves water but may plateau nitrate removal earlier due to back-diffusion; test intermediate HRT (15–20 h) to find the practical sweet spot.

  • Schwellenwert Nitrate concentration in groundwater reaches equilibrium at ~9–10 mg NO₃⁻–L⁻¹ (from 21.4 ± 0.2 initial) and does not decrease further, even with continued current generation.

    Was heißt das. Recognize that this BES design reaches a removal plateau; investigate whether it is due to concentration gradient equilibrium, OH⁻ competition, or membrane saturation before scaling up.

  • Methode When concentrating chamber effluent (10.4 ± 0.3 mg NO₃⁻–N per 17 h cycle) was recycled to the anode, nitrate was completely reduced with no nitrite accumulation (< 0.3 mg NO₂⁻–N L⁻¹) using 271 ± 43.8 mg COD.

    Was heißt das. Couple the electromigration stage with anode-based denitrification to achieve complete N removal; this two-stage design avoids the need for external electron donors in the cathode.

Ansatzpunkte6

Konkrete Lücken in dieser Publikation, jeweils mit einem Experiment, das sie schließen würde.

  • Hoch Cathode potential and cathode reaction selectivity were not varied. The paper applies 0.8 V externally but does not report actual cathode potential (vs. anode or reference) or test whether shifting cathode potential toward oxygen reduction (instead of H⁺ reduction) would reduce OH⁻ generation and improve nitrate transport.

    Section 3.2 identifies OH⁻ as the dominant competing anion (2.5 × 10⁻³ mol vs. 1.3 × 10⁻³–2.1 × 10⁻⁵ mol NO₃⁻), yet no cathode optimization is explored. The paper states 'the electrons in an ED are from water electrolysis' but does not test whether aerobic cathode operation would suppress H⁺ reduction.

    Versuch. Test cathode potentials from −0.5 to +0.5 V vs. Ag/AgCl (or equivalent) with aerated vs. anaerobic cathode; measure OH⁻ accumulation, pH, and charge transfer efficiency as functions of cathode potential.

  • Hoch Anion exchange membrane (AEM) selectivity and saturation were not characterized. The paper does not report the membrane's permselectivity for NO₃⁻ vs. OH⁻, or whether repeated cycling causes fouling, ion-exchange saturation, or loss of selectivity.

    Section 3.2 notes that OH⁻ has 'smaller molecule, and/or stronger bonding with the charge group of AEM' but provides no quantitative data on membrane properties. The equilibrium plateau at 9–10 mg NO₃⁻–N/L (Section 3.2) may be due to membrane saturation, not concentration gradient alone.

    Versuch. Measure AEM ion-exchange capacity for NO₃⁻ and OH⁻ separately; perform long-term cycling (50+ cycles) and measure permselectivity and conductance over time; test different AEM chemistries (e.g., quaternary ammonium vs. imidazolium).

  • Mittel Initial nitrate concentration effect on removal plateau was tested at only two levels (21.4 and 50 mg NO₃⁻–N/L), and the relationship between initial concentration and equilibrium concentration was not modeled or explained mechanistically.

    Section 3.2 states 'the final nitrate concentration was affected by the initial nitrate concentration' but provides no quantitative relationship or hypothesis. The paper does not test whether the plateau is proportional to initial concentration or fixed by another mechanism (e.g., membrane saturation, OH⁻ competition).

    Versuch. Test initial NO₃⁻ concentrations from 5 to 100 mg/L; plot equilibrium concentration vs. initial concentration; measure OH⁻ accumulation and AEM conductance at each level to identify the limiting mechanism.

  • Hoch Actual groundwater composition and real-world ion competition were not tested. All experiments used synthetic groundwater (NaNO₃ only) with conductivity ~200 mS/cm. Real groundwater contains Cl⁻, SO₄²⁻, HCO₃⁻, Ca²⁺, Mg²⁺, and other ions that may compete with NO₃⁻ for transport.

    Section 3.5 (Perspectives) lists 'the effectiveness of the BES needs to be demonstrated with actual groundwater' as a future challenge. The paper acknowledges this gap but does not quantify how other anions would affect nitrate removal efficiency.

    Versuch. Conduct parallel experiments with synthetic groundwater (NaNO₃ only) and real groundwater from a contaminated site; measure NO₃⁻, Cl⁻, SO₄²⁻, and HCO₃⁻ transport rates and charge transfer efficiency.

  • Mittel Hydraulic retention time (HRT) was tested at only three values (6, 20, 42 h) with a single flow rate range. The relationship between HRT, current density, and removal efficiency was not modeled, and the optimal HRT for field deployment was not identified.

    Section 3.3 shows that HRT affects water consumption (35.9 to 5.2 mL/mg NO₃⁻–N) and pH accumulation, but current density remained relatively stable (1047.4 ± 105.2 C at 42 h vs. 854.5 ± 75.5 C at 6 h). The paper does not explain why longer HRT does not increase current or whether there is a sweet spot for practical deployment.

    Versuch. Test HRT from 2 to 100 h; measure current density, charge transfer efficiency, pH, and nitrate concentration plateau as functions of HRT; develop a kinetic or equilibrium model to predict optimal HRT for a given groundwater composition.

  • Mittel Applied voltage was fixed at 0.8 V. No variation of applied potential was tested to determine its effect on current density, charge transfer efficiency, or the rate of OH⁻ vs. NO₃⁻ transport.

    Section 2.1 states 'an external voltage of 0.8 V was applied' but does not justify this choice or explore the operating window. The paper does not report actual electrode potentials (anode and cathode vs. reference), making it impossible to assess whether the system is operating in an optimal regime.

    Versuch. Test applied voltages from 0.4 to 1.5 V; measure current density, charge transfer efficiency, OH⁻ accumulation, and nitrate removal rate; identify the voltage that maximizes NO₃⁻ transport while minimizing OH⁻ generation and energy input.

Erstellt von der MESSAI-Extraktionspipeline · mit dem Quell-PDF abgleichen

02

Extrahierte Werte

Jeder aus der Publikation entnommene Wert mit seiner Quelle, damit sich jede Zahl am Text prüfen lässt.

n = 93 extrahierte Werte

Wählen Sie eine Quellenangabe, um Zitat, Seite und Konfidenz hinter einem Wert zu sehen.

33 von 93 extrahierten Zeilen modellierbar

  • 47 nicht kanonisiert (kein kanonischer Slug)
  • 7 kein SI-Wert
  • 2 von der Grenzprüfung zurückgehalten (Bezug unklar)
  • 2 nicht als modellierbar markiert
  • 1 Physikprüfung nicht bestanden
  • 1 widerspricht anderen Publikationen
ParameterWertEinheitKonfidenzQuelleAnmerkungenModellierbar
current density standard deviation0,1A m⁻³0 %
extrahiert
"The average current density was 33.6 0.1 A m-3"Ausgeschlossen: nicht kanonisiert (kein kanonischer Slug)
Current Density (Volumetric)20A m⁻³0 %
extrahiert
"current density decreased from 40 to 20 A m-3" · time_series_id=nitrate-current-correlationModellierbar
Current Density (Volumetric)29,6A m⁻³0 %
extrahiert
"The BES generated an average current density of 29.6 3.4 A m-3"Modellierbar
Applied Potential0,8V0 %
extrahiert
"The BES was operated with or without 0.8 V externally applied"Ausgeschlossen: nicht als modellierbar markiert
Applied Potential0,8V0 %
extrahiert
"an external voltage of 0.8 V was applied to the circuit and thus the BES was tur…"Ausgeschlossen: nicht als modellierbar markiert
Current Density (Volumetric)40A m⁻³0 %
extrahiert
"current density decreased from 40 to 20 A m-3" · time_series_id=nitrate-current-correlationModellierbar
current density standard deviation3,4A m⁻³0 %
extrahiert
"The BES generated an average current density of 29.6 3.4 A m-3"Ausgeschlossen: nicht kanonisiert (kein kanonischer Slug)
Current Density (Volumetric)33,6A m⁻³0 %
extrahiert
"The average current density was 33.6 0.1 A m-3"Modellierbar
Current Density (Volumetric)28A m⁻³0 %
extrahiert
"The BES achieved an average current density of 28 A m-3 upon replacement of the …"Modellierbar
pH6,6pH0 %
extrahiert
"raised the pH of the synthetic groundwater from 6.6 0.5 to 10.7 0.1"Modellierbar
Anolyte Flow Rate0,7mL min⁻¹0 %
extrahiert
"The anolyte was fed at a flow rate of 0.7 mL min-1"Ausgeschlossen: widerspricht anderen Publikationen
pH12pH0 %
extrahiert
"the migration of OH- into the concentrating chamber increased its pH to 12.0 0…"Ausgeschlossen: Physikprüfung nicht bestanden
pH10,7pH0 %
extrahiert
"raised the pH of the synthetic groundwater from 6.6 0.5 to 10.7 0.1"Modellierbar
pH standard deviation0,5pH0 %
extrahiert
"raised the pH of the synthetic groundwater from 6.6 0.5 to 10.7 0.1"Ausgeschlossen: nicht kanonisiert (kein kanonischer Slug)
Ch3 coo na0,5g0 %
extrahiert
"CH3COONa, 0.5 g"Ausgeschlossen: nicht kanonisiert (kein kanonischer Slug)
K2 hpo41,07g0 %
extrahiert
"K2HPO4, 1.07 g"Ausgeschlossen: nicht kanonisiert (kein kanonischer Slug)
Kh2 PO₄0,53g0 %
extrahiert
"KH2PO4, 0.53 g"Ausgeschlossen: nicht kanonisiert (kein kanonischer Slug)
NH₄ cl0,075g0 %
extrahiert
"NH4Cl, 0.075 g"Ausgeschlossen: nicht kanonisiert (kein kanonischer Slug)
Na cl0,25g0 %
extrahiert
"NaCl, 0.25 g"Ausgeschlossen: nicht kanonisiert (kein kanonischer Slug)
Ca cl20,01g0 %
extrahiert
"CaCl2, 0.01 g"Ausgeschlossen: nicht kanonisiert (kein kanonischer Slug)
Na hco30,05g0 %
extrahiert
"NaHCO3, 0.05 g"Ausgeschlossen: nicht kanonisiert (kein kanonischer Slug)
trace mineral solution0,1mL0 %
extrahiert
"trace mineral solution 0.1 mL"Ausgeschlossen: nicht kanonisiert (kein kanonischer Slug)
yeast extract0,1g0 %
extrahiert
"yeast extract, 0.1 g"Ausgeschlossen: nicht kanonisiert (kein kanonischer Slug)
nitrate concentration9,5mg L⁻¹0 %
extrahiert
"the nitrate concentration decreased from 21.4 0.2 to 9.5 0.3 mg L-1 within a…" · time_series_id=nitrate-current-correlation, time_since_start_h=17Ausgeschlossen: nicht kanonisiert (kein kanonischer Slug)
amount of OH-0,0025mol0 %
extrahiert
"The amount of OH- in the concentrating chamber was about 2.5 10-3 mol"Ausgeschlossen: nicht kanonisiert (kein kanonischer Slug)
25 von 93 angezeigt

Methodik

Welches System und wie es betrieben wurde

Methodik

Methodology

A tubular BES was constructed with an inner cation exchange membrane (CEM) anode chamber (500 mL) and outer anion exchange membrane (AEM) surrounding a concentrating chamber (250 mL). The anode was a 20 cm carbon brush fed with acetate-based medium (0.7 mL/min, recirculated at 100 mL/min); the cathode was Pt-coated carbon cloth. The system was submerged in a 2 L tank of synthetic groundwater (NaNO₃, ~200 mS/cm conductivity). External voltage (0.8 V) was applied to drive ion migration. Nitrate concentration, pH, conductivity, and COD were measured in all three chambers. Charge transfer efficiency was calculated as the ratio of theoretical coulombs (assuming 1 e⁻ per NO₃⁻) to actual coulombs transferred.

Systemkonfiguration

FeldWert
reactor typeBES
chamber config3-chamber

Leistungskennzahlen

FeldWert
citation count27

Betriebsbedingungen

2 Läufe extrahiert
LaufT°CpHAnolytpHKatholytSubstrat[S]mg/LHRThModusR_extΩV_appVInokulum
v2-96c77d8d0ebbb066——————startup———
v2-f586e9af22985397——————————

Extraktionspipeline

Rohextraktionen, Artefakte, Qualitätssignal

Extraktionsqualität

Ehrlichkeitssignal

Bemessen Sie Ihr Vertrauen in die extrahierten Inhalte an diesen Signalen – so hat die Pipeline ihre eigene Ausgabe für diese Publikation bewertet.

Parametervollständigkeit

13 %

Anteil der erwarteten Parameter, die extrahiert wurden

Datenvollständigkeit

30 %

Gesamtabdeckung der Extraktion über alle Felder

KI-Konfidenz

82 %

Vom Modell selbst angegebene Konfidenz

Mittlere Parameterkonfidenz

0 %

Durchschnittliche Konfidenz der oben angezeigten PaperParameter-Zeilen

vor dem Zitieren mit dem Quell-PDF abgleichen · Werte 0–1

03

Diagramm-Explorer

Verändern Sie die Eingaben dieser Publikation und sehen Sie, wie sich das vorhergesagte Ergebnis verschiebt.

04

Modell erkunden

Der Reaktor in 3D, mit Strömung, die sich ein- und ausschalten lässt.

05

KI-Erkenntnisse

Widersprüche, Lücken und Chancen aus dem Vergleich dieser Publikation mit dem Korpus.

06

Ähnliche Publikationen vergleichen

Die nächsten Publikationen nach System, Materialien und Organismen, mit ihren Ergebnissen nebeneinander.

07

Quell-PDF

Die Publikation, wie sie erschienen ist.

3D-Modell wird geladen …

Repräsentatives Modell, generisches mikrobielle Entsalzungszelle

Repräsentatives Modell: mikrobielle Entsalzungszelle – zugeordnet nur anhand des Systemtyps der Publikation, nicht ihres Reaktors oder ihrer Geometrie.

MDC
System
70,0Prozent
Bestes Ergebnis · CSB-Entfernung
93
Extrahierte Werte
2014
Jahr

Schlagwörter

  • Nitrate
  • Groundwater
  • Environmental remediation
  • Environmental chemistry
  • Current (fluid)
  • Zerovalent iron

Zitieren

Yiran Tong, Zhen He (2014). Current-driven nitrate migration out of groundwater by using a bioelectrochemical system. RSC Advances. https://doi.org/10.1039/c3ra47851c

Zeitschrift
RSC Advances

Öffnen Sie das Modell im Labor, um alle Steuerelemente, die Parameterbearbeitung und Vorlagen-Overlays zu nutzen.

Im Labor öffnen