Forschungsdaten – Titel und Zusammenfassungen von Publikationen, extrahierte Daten und Katalogeinträge – erscheinen in ihrer Originalsprache Englisch.
Publikation · MEC
Comparative Studies of Recirculatory Microbial Desalination Cell-Microbial Electrolysis Cell Coupled Systems.
Zusammenfassung
Was die Publikation berichtet, in ihren eigenen Worten.
Zusammenfassung
The recirculatory microbial desalination cell-microbial electrolysis cell (MDC-MEC) coupled system is a novel technology that generates power, treats wastewater, and supports desalination through eco-friendly processes. This study focuses on the simultaneous efficient removal of Fe2+ and Pb2+ in the MEC and ammonium ions in the MDC. It also evaluates the performances of dual-chambered MEC (DCMEC) and single-chambered MEC (SCMEC), coupled with MDC with Ferricyanide as catholyte (MDCF) in heavy metals (Pb2+ and Fe2+) removal, in addition to the production of voltage, current, and power within a 48-h cycle. The SCMEC has a higher Pb2+ (74.61%) and Fe2+ (85.05%) removal efficiency during the 48-h cycle than the DCMEC due to the simultaneous use of microbial biosorption and the cathodic reduction potential. The DCMEC had a higher current density of 753.62 mAm-2 than that of SCMEC, i.e., 463.77 mAm-2, which influences higher desalination in the MDCF than in the SCMEC within the 48-h cycle. The MDCF produces a higher voltage (627 mV) than Control 1, MDC (505 mV), as a power source to the two MECs. Stable electrolytes' pH and conductivities provide a conducive operation of the coupled system. This study lays a solid background for the type of MDC-MEC coupled systems needed for industrial scale-up.
KI-Zusammenfassung
72 % KonfidenzThis paper couples a microbial desalination cell (MDC) with two types of microbial electrolysis cells (SCMEC and DCMEC) to simultaneously remove heavy metals (Pb²⁺, Fe²⁺) and desalinate ammonium chloride. The single-chambered MEC achieved 74.61% Pb²⁺ and 85.05% Fe²⁺ removal at cathode potential −549 mV vs. Ag/AgCl through combined biosorption and cathodic reduction, while the dual-chambered MEC achieved higher current density (753.62 mA/m² vs. 463.77 mA/m²) and desalination (29.09% vs. 18.34% NH₄Cl removal). The MDC with ferricyanide catholyte generated 627 mV, powering the coupled system without external supply over 48 h fed-batch cycles.
Zentrale Erkenntnisse
Schwellenwert SCMEC achieved 74.61% Pb²⁺ removal at cathode potential −549 mV vs. Ag/AgCl, while DCMEC only reached 48.47% at −120.9 mV, demonstrating that more negative cathode potential is required to reduce Pb²⁺ below its standard reduction potential of −130 mV.
Was heißt das. Operators must maintain cathode potential ≤−500 mV vs. Ag/AgCl (approximately −300 mV vs. SHE) to achieve efficient Pb²⁺ reduction; DCMEC's shallower potential limits heavy metal removal despite higher current density.
Zielkonflikt DCMEC generated 753.62 mA/m² current density at 1 Ω (2.6× higher than SCMEC's 463.77 mA/m²) but achieved only 48.47% Pb²⁺ removal vs. SCMEC's 74.61%, showing that high current density does not guarantee heavy metal removal efficiency.
Was heißt das. Design for heavy metal removal requires prioritizing cathode potential control over current density maximization; DCMEC's membrane-induced ionic gradient improves desalination (29.09% vs. 18.34%) but compromises cathodic reduction potential.
Mechanismus Abiotic SCMEC (Control 1) achieved 40.93% Pb²⁺ and 71.43% Fe²⁺ removal at cathode potential −425.7 mV vs. Ag/AgCl, demonstrating that cathodic reduction is more efficient than microbial biosorption alone, which achieved only 30.22% Pb²⁺ and 48.75% Fe²⁺ in open-circuit SCMEC (Control 2).
Was heißt das. Biosorption alone is insufficient for heavy metal removal; coupled systems must maintain sufficient cathodic potential to enable electrochemical reduction as the dominant removal mechanism.
Mechanismus MDCF (ferricyanide catholyte) generated 627 mV with 73.28% COD removal, while Control 1 (MDC with deionized water catholyte) generated only 505 mV with 68.28% COD removal, despite similar anode potentials (−276.6 mV vs. −257.7 mV), indicating that catholyte choice and ion concentration gradient are critical to voltage output.
Was heißt das. Ferricyanide or other high-potential catholytes significantly enhance MDC voltage output and power delivery to coupled MECs; deionized water catholytes severely limit system performance despite adequate anode potential.
Mechanismus DCMEC coulombic efficiency (2.7%) was 2.2× higher than SCMEC (1.21%), attributed to membrane-enforced separation of anode and cathode chambers preventing hydrogenotrophic methanogen competition for H₂, yet both remained <3%, indicating major electron loss pathways.
Was heißt das. Dual-chamber design improves CE by isolating exoelectrogens from cathode-competing microbes, but CE remains critically low; operators should investigate methane production and biomass accumulation as dominant electron sinks in both configurations.
Widersprüche2
Nur Konflikte, die die Publikation selbst zeigt, jeweils am Text geprüft.
Innerhalb der Publikation DCMEC's superior current density (753.62 mA/m²) does not translate to superior heavy metal removal compared to SCMEC's lower current density (463.77 mA/m²).
Eine SeiteDCMEC achieved 48.47% Pb²⁺ removal with 753.62 mA/m² current density and −120.9 mV cathode potential
“The DCMEC had a higher current density of 753.62 mAm−2 than that of SCMEC, i.e., 463.77 mAm−2”
Andere SeiteSCMEC achieved 74.61% Pb²⁺ removal with 463.77 mA/m² current density and −549 mV cathode potential
“SCMEC had Pb2+ and Fe2+ removal efficiencies of 74.61% and 85.05%, respectively, with a corresponding cathode potential of −549 mV vs. Ag/AgCl, while DCMEC had Pb2+ and Fe2+ removal efficiencies of 48.47% and 72.91% respectively”
Einordnung der Autoren. Authors attribute this to cathode potential: DCMEC's −120.9 mV is insufficient to reduce Pb²⁺ (standard potential −130 mV), while SCMEC's −549 mV far exceeds the requirement. Current density drives desalination and power, but cathode potential governs heavy metal reduction; these are decoupled metrics optimized for different outcomes.
Innerhalb der Publikation Abiotic SCMEC (Control 1) achieved higher Pb²⁺ removal (40.93%) than biosorption-only SCMEC (Control 2, 30.22%), yet the paper claims cathodic reduction is 'more efficient than microbial biosorption', implying biosorption should contribute positively.
Eine SeiteControl 1 (abiotic, cathodic reduction only) Pb²⁺ removal 40.93%
“Control 1 (abiotic SCMEC) had the highest Pb2+ and Fe2+ removal efficiency with a corresponding cathode potential of −425.7 mV vs. Ag/AgCl. This process showed that the cathodic reduction potential in heavy metals removal is more efficient th”
Andere SeiteControl 2 (biosorption only, open-circuit SCMEC) Pb²⁺ removal 30.22%
“The SCMEC had the highest heavy metal removal efficiency within 48 h and higher than the DCMEC, Controls 1, 2, and 3 due to the simultaneous application of the two heavy metal removal mechanisms.”
Einordnung der Autoren. The paper resolves this by noting that SCMEC (74.61% Pb²⁺) combines both mechanisms and exceeds Control 1 (40.93%), so biosorption adds ~34 percentage points. However, the statement that cathodic reduction is 'more efficient' is based on comparing Control 1 (40.93%) to Control 2 (30.22%), which are both suboptimal systems; the paper does not isolate biosorption's contribution in the presence of optimal cathodic potential.
Ansatzpunkte6
Konkrete Lücken in dieser Publikation, jeweils mit einem Experiment, das sie schließen würde.
Hoch No systematic variation of cathode potential between −130 mV and −549 mV vs. Ag/AgCl to identify the minimum potential required for 90%+ Pb²⁺ removal or the trade-off between potential and current density.
Paper shows SCMEC at −549 mV achieves 74.61% Pb²⁺ removal and DCMEC at −120.9 mV achieves 48.47%, but does not test intermediate potentials (e.g., −300, −400 mV) to define the operating window for efficient removal.
Versuch. Vary applied voltage to MEC cathode from 0.4 V to 1.0 V (as stated in methods) and measure cathode potential, Pb²⁺ removal, and current density; identify minimum potential for 80%+ removal and corresponding current density.
Hoch No investigation of N₂O, NO₂⁻, or other nitrogen species accumulation in the MDC desalination chamber during NH₄Cl desalination; only final NH₄⁺-N concentration reported.
Paper states 'Ammonium-nitrogen (NH₄⁺–N) was measured' but provides no data on intermediate nitrogen species, pH-dependent speciation, or potential nitrification/denitrification in the desalination chamber. With recirculation at 5.75 mL/min and 75.13 min HRT, biofilm growth and redox gradients are likely.
Versuch. Measure NH₄⁺-N, NO₃⁻-N, NO₂⁻-N, and N₂O at 6, 12, 24, 48 h in desalination chamber; vary recirculation flow rate (2–10 mL/min) and monitor nitrogen speciation and pH.
Mittel No evaluation of catholyte pH effect on heavy metal removal; pH reported as 'stable' but no quantitative data on pH range or its impact on Pb²⁺/Fe²⁺ reduction kinetics.
Paper states 'Stable electrolytes' pH and conductivities provide a conducive operation' and notes 'The general range of pH for metal uptake is between 2.5 and 6', but Table 3 (pH and conductivity data) is truncated in the provided text. No systematic study of pH effect on cathode potential or removal efficiency.
Versuch. Maintain MDC desalination chamber pH at 4, 5, 6, 7, 8 using buffer and measure Pb²⁺/Fe²⁺ removal, cathode potential, and biosorption rate in SCMEC and DCMEC.
Mittel No comparison of C/N ratio or substrate (acetate) concentration effect on current density, coulombic efficiency, or heavy metal removal; acetate fixed at 4.0 g/L in MEC anolyte.
Paper notes 'The use of acetate in MEC affects the microbial diversity in the biofilm' and mentions Geobacter dominance, but does not vary acetate concentration or test C/N ratio impact on nitrogen cycling or electron transfer efficiency.
Versuch. Vary sodium acetate from 2 to 8 g/L and measure current density, CE, Pb²⁺ removal, and microbial community composition (16S rRNA); assess whether higher acetate improves cathode potential control.
Mittel No measurement of dissolved oxygen (DO) in anode or cathode chambers; anaerobic conditions assumed but not verified, risking unquantified aerobic respiration or nitrification.
Methods state 'Nitrogen gas was pumped into the hermetic container for about 5 min before and after they were filled with the culture' but no DO monitoring during 48 h operation. Recirculation at 5.75 mL/min may introduce oxygen; DO could drive unintended nitrification in desalination chamber.
Versuch. Measure DO continuously in anode, cathode, and desalination chambers during 48 h operation; correlate DO spikes with nitrogen speciation changes and current density fluctuations.
Mittel No long-term stability data; all experiments are 48 h fed-batch cycles with no assessment of electrode fouling, biofilm stability, or performance decay over multiple cycles.
Paper focuses on single 48 h cycle performance; no data on cycle-to-cycle reproducibility, electrode degradation, or whether the 'stable pH and conductivity' persist beyond 48 h.
Versuch. Operate MDC-DCMEC coupled system for 10 consecutive 48 h fed-batch cycles; measure voltage, current density, Pb²⁺/Fe²⁺ removal, and NH₄Cl desalination per cycle to assess long-term viability.
Erstellt von der MESSAI-Extraktionspipeline · mit dem Quell-PDF abgleichen
Extrahierte Werte
Jeder aus der Publikation entnommene Wert mit seiner Quelle, damit sich jede Zahl am Text prüfen lässt.
n = 6 extrahierte Werte
Wählen Sie eine Quellenangabe, um Zitat, Seite und Konfidenz hinter einem Wert zu sehen.
0 von 5 extrahierten Zeilen modellierbar
- 2 nicht kanonisiert (kein kanonischer Slug)
- 3 kein SI-Wert
| Parameter | Wert | Einheit | Konfidenz | Quelle | Modellierbar |
|---|---|---|---|---|---|
| Substrate | wastewater | — | 80 % | llm | |
| Chambers | 1 | — | 80 % | extrahiert | Ausgeschlossen: nicht kanonisiert (kein kanonischer Slug) |
| Reactor type | single-chamber | — | 80 % | extrahiert | Ausgeschlossen: nicht kanonisiert (kein kanonischer Slug) |
| Maximum Current Density | 754 | A/m² | 60 % | extrahiert | Ausgeschlossen: kein SI-Wert |
| Hydraulic retention time | 48 | h | 50 % | extrahiert | Ausgeschlossen: kein SI-Wert |
| Maximum Current Density | 754 | mA/m² | 50 % | extrahiert | Ausgeschlossen: kein SI-Wert |
Methodik
Welches System und wie es betrieben wurde
Methodik
Methodology
The study employed a recirculatory MDC-MEC coupled system with two MEC configurations (single-chambered SCMEC and dual-chambered DCMEC) operated in 48 h fed-batch cycles. The MDC (anode 432 mL, desalination 144 mL, cathode 288 mL) was powered by ferricyanide catholyte (MDCF) or phosphate buffer (MDCP100), and supplied voltage to the MEC (anode 162 mL, cathode 108 mL for DCMEC; 270 mL total for SCMEC). Heavy metals (Pb²⁺, Fe²⁺) were measured by atomic absorption spectroscopy, ammonium-nitrogen by colorimetry, and electrode potentials by potentiostat with Ag/AgCl reference. Controls included open-circuit MECs and an abiotic SCMEC to isolate biosorption and cathodic reduction mechanisms.
Systemkonfiguration
| Feld | Wert |
|---|---|
| chamber configuration | dual |
| system type | MEC |
Leistungskennzahlen
| Feld | Wert |
|---|---|
| citation count | 9 |
Betriebsparameter
| Feld | Wert |
|---|---|
| substrate | ["wastewater"] |
Elektrochemische Daten
| Feld | Wert |
|---|---|
| max current density | 753.62 |
Extraktionspipeline
Rohextraktionen, Artefakte, Qualitätssignal
Extraktionsqualität
EhrlichkeitssignalBemessen Sie Ihr Vertrauen in die extrahierten Inhalte an diesen Signalen – so hat die Pipeline ihre eigene Ausgabe für diese Publikation bewertet.
Parametervollständigkeit
50 %
Anteil der erwarteten Parameter, die extrahiert wurden
Datenvollständigkeit
70 %
Gesamtabdeckung der Extraktion über alle Felder
KI-Konfidenz
72 %
Vom Modell selbst angegebene Konfidenz
Mittlere Parameterkonfidenz
67 %
Durchschnittliche Konfidenz der oben angezeigten PaperParameter-Zeilen
vor dem Zitieren mit dem Quell-PDF abgleichen · Werte 0–1
Diagramm-Explorer
Verändern Sie die Eingaben dieser Publikation und sehen Sie, wie sich das vorhergesagte Ergebnis verschiebt.
Modell erkunden
Der Reaktor in 3D, mit Strömung, die sich ein- und ausschalten lässt.
KI-Erkenntnisse
Widersprüche, Lücken und Chancen aus dem Vergleich dieser Publikation mit dem Korpus.
Ähnliche Publikationen vergleichen
Die nächsten Publikationen nach System, Materialien und Organismen, mit ihren Ergebnissen nebeneinander.
Quell-PDF
Die Publikation, wie sie erschienen ist.
Repräsentatives Modell, generisches MEC
Zum Interagieren tippenRepräsentatives Modell, generisches MEC
Repräsentatives Modell: MEC – zugeordnet nur anhand des Systemtyps der Publikation, nicht ihres Reaktors oder ihrer Geometrie.
Schlagwörter
- Desalination
- Microbial electrolysis cell
- Electrolysis
- Electrolytic cell
- Pulp and paper industry
- Sewage treatment
Zitieren
Desmond Ato Koomson, Jingyu Huang, Guang Li et al. (2021). Comparative Studies of Recirculatory Microbial Desalination Cell-Microbial Electrolysis Cell Coupled Systems. Membranes. https://doi.org/10.3390/membranes11090661
Öffnen Sie das Modell im Labor, um alle Steuerelemente, die Parameterbearbeitung und Vorlagen-Overlays zu nutzen.
Im Labor öffnen