Forschungsdaten – Titel und Zusammenfassungen von Publikationen, extrahierte Daten und Katalogeinträge – erscheinen in ihrer Originalsprache Englisch.
Publikation · MES
3D bioprinting on cathodes in microbial electrosynthesis for increased acetate production rate using Sporomusa ovata
Zusammenfassung
Was die Publikation berichtet, in ihren eigenen Worten.
Zusammenfassung
Microbial Electrosynthesis (MES) is emerging as a promising technology for the decarbonization of the economy. The use of CO2 as a feedstock, i.e. through carbon capture and utilization, can create attractive business opportunities for the production of third generation biofuels. Achieving highly efficient electron transfer from the cathode to microbes is one of the main challenges hindering the development of MES reactors. It is, therefore, essential to improve biofilm growth for enhanced electron-transfer during bioconversion. In this study we show the first use of 3D bio-printing for microbial electrosynthesis systems, creating a “synthetic biofilm”, containing Sporomusa ovata. The synthetic biofilm greatly improves the acetate production rate while drastically decreasing start-up time. Using H-cell reactors, poised at −0.8 V vs Ag/AgCl, with a synthetic biofilm printed on a carbon cloth electrode, an average acetate productivity of 47±5.1 g day⁻¹ m⁻² (0.31±0.55 g L⁻¹ day⁻¹) with a maximum productivity of 104 g day1 m−2 (0.68 g L⁻¹⋅day⁻¹) was achieved. This is an order of magnitude higher than typical S. ovata production rates, and 2–3 fold higher than reactors using specialized cathodes. Start-up of MES reactors typically require days, whereas a high production rate was achieved almost directly after the start-up (±40 h) using the synthetic biofilm. Cyclic voltammetry data showed H2 formation occurred at much higher potentials than in the control reactors, (approx. −550 mV vs. −950 mV for controls). Imaging showed that the synthetic biofilm allowed for dense growth of S. ovata cells at the cathode, increasing electron transfer efficiency and potentially improving the bio-catalyzation of H2.
Extrahierte Werte
Jeder aus der Publikation entnommene Wert mit seiner Quelle, damit sich jede Zahl am Text prüfen lässt.
Noch nicht extrahiert
Diese Publikation steht in der Warteschlange der MESSAI-Extraktionspipeline. Versuchsbedingungen, Leistungskennzahlen und strukturierte Parameter erscheinen hier, sobald sie verarbeitet ist – schauen Sie später wieder vorbei oder öffnen Sie oben das Original-PDF, um sie jetzt zu lesen.
Diagramm-Explorer
Verändern Sie die Eingaben dieser Publikation und sehen Sie, wie sich das vorhergesagte Ergebnis verschiebt.
Modell erkunden
Der Reaktor in 3D, mit Strömung, die sich ein- und ausschalten lässt.
KI-Erkenntnisse
Widersprüche, Lücken und Chancen aus dem Vergleich dieser Publikation mit dem Korpus.
Ähnliche Publikationen vergleichen
Die nächsten Publikationen nach System, Materialien und Organismen, mit ihren Ergebnissen nebeneinander.
Repräsentatives Modell, generisches mikrobielles elektrochemisches System
Zum Interagieren tippenRepräsentatives Modell, generisches mikrobielles elektrochemisches System
Repräsentatives Modell: mikrobielles elektrochemisches System – zugeordnet nur anhand des Systemtyps der Publikation, nicht ihres Reaktors oder ihrer Geometrie.
In diesem Datensatz
Organismen, Parameter und Materialien, die diese Publikation berichtet. Jeder Eintrag verweist auf seine Seite.
Organismen · 1
Schlagwörter
- Electrosynthesis
- Cathode
- Production rate
- 3D bioprinting
- Chemical engineering
Zitieren
Adolf Krige, Ulrika Rova, Paul Christakopoulos (2021). 3D bioprinting on cathodes in microbial electrosynthesis for increased acetate production rate using Sporomusa ovata. Journal of environmental chemical engineering. https://doi.org/10.1016/j.jece.2021.106189
Öffnen Sie das Modell im Labor, um alle Steuerelemente, die Parameterbearbeitung und Vorlagen-Overlays zu nutzen.
Im Labor öffnen