Forschungsdaten – Titel und Zusammenfassungen von Publikationen, extrahierte Daten und Katalogeinträge – erscheinen in ihrer Originalsprache Englisch.
Publikation
The Influence of Alkali Cations on the Performance of Pt Electrodes in Kolbe Electrolysis of Acetic Acid
Zusammenfassung
Was die Publikation berichtet, in ihren eigenen Worten.
Zusammenfassung
Electrochemical decarboxylation of carboxylic acids is considered a sustainable method to improve the quality of pyrolysis oil. In this study, we assess the effect of monovalent alkali cations (of the acetates) on the performance of Pt electrodes in acid decarboxylation and the competing OER, using various electrochemical methods. We reveal a strong cation dependence generally following the trend Li⁺<Na⁺<K⁺~Cs⁺ within a large pH range. Using rotating ring disc electrode measurements, we highlight the strong contribution of the oxygen evolution reaction particularly for electrolytes containing Li⁺ and Na⁺ which decreases the selectivity for Kolbe oxidation. In addition, the faradaic efficiency (FE) towards methanol ranges between 16 % (for Li⁺) and 29 % (for Cs⁺) at high solution pH (9 or 12). The observed trends are generally explained by a cation‐dependent interfacial pH and surface coverage of acetate, both lowest for Li. This is evident from differences in charge transfer resistance determined by impedance measurements and local pH measurements. Additionally, enhanced dissolution of Pt by Li⁺ is also proposed. This work highlights that K⁺ and Cs⁺ cations favor FE for electrochemical Kolbe oxidation, at relatively low current densities.
Extrahierte Werte
Jeder aus der Publikation entnommene Wert mit seiner Quelle, damit sich jede Zahl am Text prüfen lässt.
n = 34 extrahierte Werte
Wählen Sie eine Quellenangabe, um Zitat, Seite und Konfidenz hinter einem Wert zu sehen.
0 von 34 extrahierten Zeilen modellierbar
- 34 nicht kanonisiert (kein kanonischer Slug)
| Parameter | Wert | Einheit | Konfidenz | Quelle | Anmerkungen | Modellierbar |
|---|---|---|---|---|---|---|
| Low current density, limitation of cation effects | 10 | mA/cm² | 100 % | extrahiert | "At low current density (10 mA/cm2), the concentration of methyl radicals at the …" · acids=["acetic acid"], electrode=Pt, electrolyte=1 M acetic acid/AM+-acetate | Ausgeschlossen: nicht kanonisiert (kein kanonischer Slug) |
| RRDE rotation rate | 1.500 | rpm | 100 % | rotating ring-disk electrode (rrde) | "(b) CV scans from 0.5- 3 VRHE of 1 M acetic acid/AM + -acetate (pH 5) at 1500 rp…" · ph=5, acids=["acetic acid"], electrode=Pt, electrolyte=1 M acetic acid/AM+-acetate | Ausgeschlossen: nicht kanonisiert (kein kanonischer Slug) |
| Scan rate of cyclic voltammetry | 100 | mV/s | 100 % | extrahiert | "CVs were obtained at a scan speed of 100 mV/s in the potential range from 0-3 VR…" · acids=["acetic acid"], electrode=Pt, electrolyte=1 M acetic acid/AM+-acetate | Ausgeschlossen: nicht kanonisiert (kein kanonischer Slug) |
| Electrolyte pH range investigated | 3 | — | 100 % | extrahiert | "across a wide range of (bulk) electrolyte pH (3-12) and applied current densitie…" · acids=["acetic acid"], electrode=Pt, electrolyte=1 M acetic acid/AM+-acetate | Ausgeschlossen: nicht kanonisiert (kein kanonischer Slug) |
| Distance of pH sensor from Pt electrode surface | 1,8 | mm | 100 % | extrahiert | "side opening placed near the Pt electrode surface (1.8 mm distance)" · electrode=Pt foil, electrolyte=1 M acetic acid/AM+-acetate, bulk pH 5, current_density=25 mA/cm2 | Ausgeschlossen: nicht kanonisiert (kein kanonischer Slug) |
| Potential at which PEIS was performed | 2,1 | VRHE | 100 % | potentiostatic eis (peis) | "the electrode is polarized at 2.1 VRHE" · ph=5, acids=["acetic acid"], electrode=Pt, electrolyte=1 M acetic acid/AM+-acetate | Ausgeschlossen: nicht kanonisiert (kein kanonischer Slug) |
| Potential window of cyclic voltammetry | 0 | VRHE | 100 % | extrahiert | "CVs were obtained at a scan speed of 100 mV/s in the potential range from 0-3 VR…" · acids=["acetic acid"], electrode=Pt, electrolyte=1 M acetic acid/AM+-acetate | Ausgeschlossen: nicht kanonisiert (kein kanonischer Slug) |
| Bulk electrolyte pH values for cyclic voltammetry | 3 | — | 100 % | extrahiert | "The electrolyte pH was adjusted to (a) pH 3 (b) pH 5 (c) pH 9 and (d) pH 12, res…" · acids=["acetic acid"], electrode=Pt, electrolyte=1 M acetic acid/AM+-acetate | Ausgeschlossen: nicht kanonisiert (kein kanonischer Slug) |
| Current density range investigated | 10 | mA/cm² | 100 % | extrahiert | "across a wide range of (bulk) electrolyte pH (3-12) and applied current densitie…" · acids=["acetic acid"], electrode=Pt, electrolyte=1 M acetic acid/AM+-acetate | Ausgeschlossen: nicht kanonisiert (kein kanonischer Slug) |
| Total acetic acid/acetate electrolyte concentration | 1 | M | 95 % | extrahiert | "(b) CV scans from 0.5- 3 VRHE of 1 M acetic acid/AM + -acetate (pH 5) at 1500 rp…" · ph=5, acids=["acetic acid"], electrode=Pt, electrolyte=1 M acetic acid/AM+-acetate | Ausgeschlossen: nicht kanonisiert (kein kanonischer Slug) |
| Current density in chronopotentiometric product measurements | 25 | mA/cm² | 95 % | extrahiert | "Measurements were performed at 25 mA/cm2 to enable reproducible product detectio…" · cell=undivided batch cell, no membrane, acids=["acetic acid"], electrode=Pt, electrolyte=1 M acetic acid/AM+-acetate | Ausgeschlossen: nicht kanonisiert (kein kanonischer Slug) |
| Lower acetate electrolyte concentration tested | 0,63 | M | 90 % | extrahiert | "concentration-dependent measurements performed with 0.63 M AM + acetate and 1 M …" · electrode=Pt | Ausgeschlossen: nicht kanonisiert (kein kanonischer Slug) |
| Near-surface (local) pH during Kolbe electrolysis, Na+ acetate | 4,2 | — | 90 % | ph meter with side-opening tip near the pt surface | "A decrease in pH was observed for all cations used with the extent of pH decreas…" · ph=5 (bulk), cation=Na+, electrode=Pt foil, electrolyte=1 M acetic acid/AM+-acetate, bulk pH 5 | Ausgeschlossen: nicht kanonisiert (kein kanonischer Slug) |
| Peak potential showing transition from OER to Kolbe reaction (Cs+ acetate, low scan rate) | 2,5 | VRHE | 90 % | rrde / cyclic voltammetry | "The peak at 2.5-2.6 VRHE shows the transition of the OER to the Kolbe reaction a…" · ph=5, acids=["acetic acid"], cation=Cs+, electrode=Pt | Ausgeschlossen: nicht kanonisiert (kein kanonischer Slug) |
| Potential of inflection zone (OER to Kolbe transition), pH 12 | 2,3 | VRHE | 90 % | cyclic voltammetry | "In the inflection zone (at ~2.5 VRHE at pH 9 and at ~2.3 VRHE at pH 12)" · ph=12, acids=["acetic acid"], electrode=Pt, electrolyte=1 M acetic acid/AM+-acetate | Ausgeschlossen: nicht kanonisiert (kein kanonischer Slug) |
| Potential of inflection zone (OER to Kolbe transition), pH 9 | 2,5 | VRHE | 90 % | cyclic voltammetry | "In the inflection zone (at ~2.5 VRHE at pH 9 and at ~2.3 VRHE at pH 12)" · ph=9, acids=["acetic acid"], electrode=Pt, electrolyte=1 M acetic acid/AM+-acetate | Ausgeschlossen: nicht kanonisiert (kein kanonischer Slug) |
| Potential at which selectivity changes from OER to Kolbe (RRDE) | 2,5 | VRHE | 90 % | rotating ring-disk electrode (rrde) | "The selectivity changes from OER to Kolbe at approx. 2.5 VRHE" · ph=5, acids=["acetic acid"], electrode=Pt, electrolyte=1 M acetic acid/AM+-acetate | Ausgeschlossen: nicht kanonisiert (kein kanonischer Slug) |
| Current onset potential (not affected by monovalent cations) | 1,8 | VRHE | 90 % | cyclic voltammetry | "the current onset potential (~1.8 VRHE) is not affected by monovalent" · ph=5, acids=["acetic acid"], cation=Li+, Na+, K+, Cs+, electrode=Pt | Ausgeschlossen: nicht kanonisiert (kein kanonischer Slug) |
| Faradaic efficiency towards methanol, Li+ acetate | 16 | % | 90 % | inline gc | "the faradaic efficiency (FE) towards methanol ranges between 16 % (for Li +) and…" · ph=9 or 12, acids=["acetic acid"], cation=Li+, electrode=Pt | Ausgeschlossen: nicht kanonisiert (kein kanonischer Slug) |
| Averaged faradaic efficiency towards ethane at pH 5 (minimum across all cations) | 82 | % | 90 % | inline gc | "Indeed at pH 5, a high averaged faradaic efficiency (above 82 %) towards the cou…" · ph=5, acids=["acetic acid"], cation=Li+, Na+, K+, Cs+, electrode=Pt | Ausgeschlossen: nicht kanonisiert (kein kanonischer Slug) |
| Faradaic efficiency towards methanol, Cs+ acetate | 29 | % | 90 % | inline gc | "the faradaic efficiency (FE) towards methanol ranges between 16 % (for Li +) and…" · ph=9 or 12, acids=["acetic acid"], cation=Cs+, electrode=Pt | Ausgeschlossen: nicht kanonisiert (kein kanonischer Slug) |
| Average faradaic efficiency for oxygen evolution (OER) at pH 3 (range across Li+, Na+, K+, Cs+) | 70 | % | 90 % | inline gc | "with FE values ranging from 70-89 %" · ph=3, acids=["acetic acid"], cation=Li+, Na+, K+, Cs+, electrode=Pt | Ausgeschlossen: nicht kanonisiert (kein kanonischer Slug) |
| Near-surface (local) pH during Kolbe electrolysis, K+ acetate | 4,4 | — | 90 % | ph meter with side-opening tip near the pt surface | "A decrease in pH was observed for all cations used with the extent of pH decreas…" · ph=5 (bulk), cation=K+, electrode=Pt foil, electrolyte=1 M acetic acid/AM+-acetate, bulk pH 5 | Ausgeschlossen: nicht kanonisiert (kein kanonischer Slug) |
| Near-surface (local) pH during Kolbe electrolysis, Li+ acetate | 3,1 | — | 90 % | ph meter with side-opening tip near the pt surface | "A decrease in pH was observed for all cations used with the extent of pH decreas…" · ph=5 (bulk), cation=Li+, electrode=Pt foil, electrolyte=1 M acetic acid/AM+-acetate, bulk pH 5 | Ausgeschlossen: nicht kanonisiert (kein kanonischer Slug) |
| Near-surface (local) pH during Kolbe electrolysis, Cs+ acetate | 4,5 | — | 90 % | ph meter with side-opening tip near the pt surface | "A decrease in pH was observed for all cations used with the extent of pH decreas…" · ph=5 (bulk), cation=Cs+, electrode=Pt foil, electrolyte=1 M acetic acid/AM+-acetate, bulk pH 5 | Ausgeschlossen: nicht kanonisiert (kein kanonischer Slug) |
Extraktionspipeline
Rohextraktionen, Artefakte, Qualitätssignal
Extraktionsqualität
EhrlichkeitssignalBemessen Sie Ihr Vertrauen in die extrahierten Inhalte an diesen Signalen – so hat die Pipeline ihre eigene Ausgabe für diese Publikation bewertet.
Mittlere Parameterkonfidenz
88 %
Durchschnittliche Konfidenz der oben angezeigten PaperParameter-Zeilen
vor dem Zitieren mit dem Quell-PDF abgleichen · Werte 0–1
Diagramm-Explorer
Verändern Sie die Eingaben dieser Publikation und sehen Sie, wie sich das vorhergesagte Ergebnis verschiebt.
Modell erkunden
Der Reaktor in 3D, mit Strömung, die sich ein- und ausschalten lässt.
KI-Erkenntnisse
Widersprüche, Lücken und Chancen aus dem Vergleich dieser Publikation mit dem Korpus.
Ähnliche Publikationen vergleichen
Die nächsten Publikationen nach System, Materialien und Organismen, mit ihren Ergebnissen nebeneinander.
Quell-PDF
Die Publikation, wie sie erschienen ist.
Dieser Publikation ist noch kein 3D-Modell zugeordnet. Die daraus extrahierten Werte stehen unter „Extrahierte Werte“.
Schlagwörter
- acetic acid
- alkali metal cations
- platinum electrode
- Kolbe electrolysis
- electrochemical decarboxylation
- bio-oil upgrading
- Faradaic efficiency
- interfacial pH
Zitieren
Talal Ashraf, Bastian Timo Mei, Guido Mul (2024). The Influence of Alkali Cations on the Performance of Pt Electrodes in Kolbe Electrolysis of Acetic Acid. ChemElectroChem. https://doi.org/10.1002/celc.202400274
- Zeitschrift
- ChemElectroChem