Forschungsdaten – Titel und Zusammenfassungen von Publikationen, extrahierte Daten und Katalogeinträge – erscheinen in ihrer Originalsprache Englisch.
Publikation · MFC
Integrated Constructed Wetland–Microbial Fuel Cell Systems Using Activated Carbon: Structure-Activity Relationship of Activated Carbon, Removal Performance of Organics and Nitrogen
Zusammenfassung
Was die Publikation berichtet, in ihren eigenen Worten.
Zusammenfassung
This study designed integrated constructed wetland–microbial fuel cell (CW–MFC) systems using activated carbon (AC) as both CW substrates and MFC anodes and investigated the structure-activity relationship of six kinds of commercial columnar AC, as well as the organics and nitrogen removal, microbial activity and diversity of CW–MFCs. Results showed that the nitrogen adsorption by AC tended to be a linear process in which physical adsorption played a leading role and micropores made great contributions. A higher specific surface area, developed mesopores, and oxygen functionalities were conducive to the capacitance properties of AC, while a higher specific surface area and developed micropores were conducive to reduce material resistance and improve ion permeability. Coconut-shell-based AC had both excellent nitrogen adsorption capacity and electrochemical properties, making it ideal as both CW substrates and MFC anodes for CW–MFCs. The electricity generation, coulombic efficiency, internal resistance, and organics and nitrogen removal of CW–MFCs were positively correlated with the total depth of AC anodes. The total depth of AC anodes can be determined based on the influent organics/nitrogen loadings and organics/nitrogen removal load of AC, and a relatively smaller depth of a single AC anode (5 cm) was recommended. The MFC effectively improved the enzymatic activity (by 10.33% dehydrogenase, 8.72% catalase, and 7.35% ammonia monooxygenase), nitrification/denitrification intensity (by 9.53%/6.68%), and microbial diversity (by 1.64–4.07%) of AC (MFC anodes) in CW–MFCs, while the depth of a single AC anode barely influenced the microbial activity and diversity. MFCs increased COD and NH3-N removal in CW–MFCs by 11.60% and 3.4%, respectively. The increased total adsorption capacity of AC with the increase of its total depth narrowed the difference in COD removal resulting from the promotion of MFCs on organics degradation. MFCs increased TN removal in CW–MFCs by 5.29% through promoting denitrification in cathodes and enhancing NH3-N assimilation in anodes. The phyla of EAB (Proteobacteria, Bacteroidetes, Firmicutes, and Acidobacteria) and genera of EAB (Citrobacter, Geobacter, and Pseudomonas) accounted for 85–86% and 15.58–16.64% of the microbial community on AC anodes in CW–MFCs, respectively.
KI-Zusammenfassung
72 % KonfidenzZentrale Erkenntnisse
Schwellenwert Nitrogen adsorption by AC follows pseudo-first-order kinetics dominated by physical adsorption, reaching 65–75% of maximum capacity in 1 h and 89–94% by 2 h, indicating micropores are the primary adsorption sites.
Was heißt das. Designers should size AC contact time to ≥2 h for effective ammonia capture; shorter residence times will leave significant adsorption capacity unused.
Zielkonflikt Increased total AC anode depth (10–20 cm) improved electricity generation, coulombic efficiency, and nitrogen removal, but the effect plateaued because AC's total adsorption capacity narrowed the performance difference between MFC and non-MFC systems.
Was heißt das. Operators should not assume deeper anodes always improve performance; beyond ~15–20 cm total depth, adsorption saturation limits the marginal benefit of additional MFC promotion.
Mechanismus MFC operation increased ammonia monooxygenase activity by 7.35%, nitrification intensity by 9.53%, and denitrification intensity by 6.68%, but denitrification gains were smaller than nitrification gains.
Was heißt das. CW–MFCs are better suited for systems where nitrification is the bottleneck; if denitrification is limiting, additional cathode electron supply or carbon source may be needed.
Mechanismus Coconut-shell-based AC achieved 4.22 mg N/g maximum adsorption capacity with balanced micropore (48.1%) and mesopore (51.9%) distribution, outperforming coal-based AC (3.87 mg N/g) despite lower specific surface area.
Was heißt das. Pore distribution matters more than total surface area for nitrogen adsorption; prioritize AC with balanced micro/mesopore ratios over high-surface-area materials.
Zielkonflikt Single AC anode depth (5 cm vs 10 cm) had negligible effect on microbial activity and diversity, but total anode depth strongly influenced performance, suggesting horizontal distribution is more important than vertical stacking.
Was heißt das. Design CW–MFCs with multiple shallow anodes distributed horizontally rather than stacked vertically to maximize biofilm contact without sacrificing microbial community structure.
Widersprüche1
Nur Konflikte, die die Publikation selbst zeigt, jeweils am Text geprüft.
Innerhalb der Publikation AC anode depth effect on performance vs. microbial community structure
Eine SeiteElectricity generation, coulombic efficiency, and nitrogen removal were positively correlated with total AC anode depth (10–20 cm)
“The electricity generation, coulombic efficiency, internal resistance, and organics and nitrogen removal of CW–MFCs were positively correlated with the total depth of AC anodes.”
Andere SeiteDepth of a single AC anode (5 cm vs 10 cm) barely influenced microbial activity and diversity
“while the depth of a single AC anode barely influenced the microbial activity and diversity”
Einordnung der Autoren. Authors resolve this by distinguishing total anode depth (cumulative effect of multiple anodes) from single-anode depth; total depth increases surface area and adsorption capacity without changing local biofilm structure, so performance scales with total depth but microbial diversity does not depend on individual anode thickness.
Ansatzpunkte6
Konkrete Lücken in dieser Publikation, jeweils mit einem Experiment, das sie schließen würde.
Hoch No measurement of cathode potential, anode potential, or cell voltage under varying external resistances during nitrogen cycling; polarization curves were obtained but not correlated with NO3−, NO2−, or N2O concentrations.
The paper states 'MFCs increased TN removal in CW–MFCs by 5.29% through promoting denitrification in cathodes' but provides no cathode potential data or evidence that denitrification was limited by electron availability vs. carbon or oxygen.
Versuch. Measure cathode potential (vs. Ag/AgCl) and anode potential during steady-state operation; correlate with NO3−-N, NO2−-N, and N2O-N profiles along the wetland depth to identify the electrochemical window driving denitrification.
Hoch No investigation of N2O accumulation or N2O/N2 selectivity; only TN, NO3−-N, NO2−-N, and NH3-N were measured.
Denitrification intensity increased only 6.68% despite 9.53% nitrification increase, suggesting incomplete denitrification or N2O accumulation, but this was not measured or discussed.
Versuch. Measure N2O-N and N2-N in effluent and gas phase using gas chromatography or isotope tracing; test whether cathode potential <−0.3 V (vs. SHE) favors N2O reduction to N2.
Hoch No variation of hydraulic residence time (HRT); all systems operated at fixed 2.0 d HRT.
HRT is a primary control on nitrification/denitrification balance and nitrogen removal, but only one HRT was tested. The paper does not establish whether 2.0 d is optimal or limiting.
Versuch. Operate parallel CW–MFCs at HRT = 1.0, 2.0, 3.0, and 4.0 d; measure TN, NO3−-N, NO2−-N, and nitrification/denitrification intensity to identify the HRT window maximizing nitrogen removal.
Hoch No variation of influent C/N ratio; all synthetic wastewater had fixed C/N ≈ 5 (COD:TN ≈ 188:39).
C/N ratio is critical for denitrification; low C/N can limit heterotrophic denitrification. The paper does not test whether the fixed ratio is optimal or whether MFC-driven autotrophic denitrification could compensate at lower C/N.
Versuch. Prepare synthetic wastewater with C/N ratios of 3, 5, 7, and 10; measure TN removal, NO2−-N accumulation, and denitrification intensity in CW–MFC vs. CW control to quantify MFC benefit across C/N ranges.
Mittel No measurement of dissolved oxygen (DO) in the cathode region or along the wetland depth; aerobic/anaerobic zones were not characterized.
Cathode denitrification requires anoxia, but the paper does not confirm that the graphite plate cathode region remained anoxic or measure DO gradients that might explain the modest 6.68% denitrification improvement.
Versuch. Install DO probes at multiple depths in the cathode region and near the anode; measure DO profiles during steady-state operation to confirm anoxia and identify any aerobic zones that might compete with denitrification.
Mittel No systematic study of AC material cost vs. performance trade-off; CS-AC was selected as optimal but costs 2× more than coal-based AC.
Table 1 shows CS-AC costs US$1130–1510/ton vs. C-AC at US$530–850/ton, but the paper does not quantify the performance gain per dollar or discuss cost-effectiveness for full-scale deployment.
Versuch. Compare CW–MFCs built with CS-AC, C-AC, and a 50:50 blend; measure TN removal, electricity generation, and coulombic efficiency per unit cost to identify the cost-optimal material for target removal rates.
Erstellt von der MESSAI-Extraktionspipeline · mit dem Quell-PDF abgleichen
Extrahierte Werte
Jeder aus der Publikation entnommene Wert mit seiner Quelle, damit sich jede Zahl am Text prüfen lässt.
n = 4 extrahierte Werte
Wählen Sie eine Quellenangabe, um Zitat, Seite und Konfidenz hinter einem Wert zu sehen.
0 von 4 extrahierten Zeilen modellierbar
- 2 nicht kanonisiert (kein kanonischer Slug)
- 2 kein SI-Wert
| Parameter | Wert | Einheit | Konfidenz | Quelle | Modellierbar |
|---|---|---|---|---|---|
| Dominant organism | Geobacter | — | 80 % | extrahiert | Ausgeschlossen: nicht kanonisiert (kein kanonischer Slug) |
| Electrode material | activated carbon | — | 50 % | extrahiert | Ausgeschlossen: nicht kanonisiert (kein kanonischer Slug) |
| Substrate | activated carbon | — | 50 % | extrahiert | Ausgeschlossen: kein SI-Wert |
| Anode material | activated carbon | — | 50 % | extrahiert | Ausgeschlossen: kein SI-Wert |
Methodik
Welches System und wie es betrieben wurde
Methodik
Methodology
Six commercial AC types (coal, coconut shell, walnut shell, peach shell, jujube shell, apricot shell) were characterized for specific surface area, pore structure, oxygen-containing functional groups, nitrogen adsorption capacity (Langmuir/Freundlich isotherms, pseudo-first/second-order kinetics), and electrochemical properties (cyclic voltammetry, galvanostatic charge/discharge, electrochemical impedance spectroscopy). Five lab-scale up-flow CW–MFCs (50 cm height, 19 cm inner diameter) were constructed with CS-AC as anode and lava/soil as substrate, with total AC anode depths of 10–20 cm and single-anode depths of 5–10 cm. Systems operated for two years at 2.0 d HRT with synthetic wastewater (188–204 mg/L COD, 39–40 mg/L TN, pH 7.0). Influent and effluent were sampled every 10 days and analyzed for COD, NH3-N, NO2−-N, NO3−-N, and TN. Voltage was logged every 30 min; polarization curves and coulombic efficiency were calculated. After two years, microbial biofilm was collected from six substrate types and analyzed by 16S rRNA sequencing; enzymatic activity (dehydrogenase, catalase, ammonia monooxygenase) and nitrification/denitrification potential were measured.
Systemkonfiguration
| Feld | Wert |
|---|---|
| reactor type | MES |
| chamber config | 1-chamber |
Elektrodenspezifikationen
| Feld | Wert |
|---|---|
| materials | ["activated carbon"] |
Biologische Parameter
| Feld | Wert |
|---|---|
| dominant species | ["Geobacter","Pseudomonas"] |
Leistungskennzahlen
| Feld | Wert |
|---|---|
| citation count | 8 |
Extraktionspipeline
Rohextraktionen, Artefakte, Qualitätssignal
Extraktionsqualität
EhrlichkeitssignalBemessen Sie Ihr Vertrauen in die extrahierten Inhalte an diesen Signalen – so hat die Pipeline ihre eigene Ausgabe für diese Publikation bewertet.
Parametervollständigkeit
38 %
Anteil der erwarteten Parameter, die extrahiert wurden
Datenvollständigkeit
40 %
Gesamtabdeckung der Extraktion über alle Felder
KI-Konfidenz
72 %
Vom Modell selbst angegebene Konfidenz
Mittlere Parameterkonfidenz
57 %
Durchschnittliche Konfidenz der oben angezeigten PaperParameter-Zeilen
vor dem Zitieren mit dem Quell-PDF abgleichen · Werte 0–1
Diagramm-Explorer
Verändern Sie die Eingaben dieser Publikation und sehen Sie, wie sich das vorhergesagte Ergebnis verschiebt.
Modell erkunden
Der Reaktor in 3D, mit Strömung, die sich ein- und ausschalten lässt.
KI-Erkenntnisse
Widersprüche, Lücken und Chancen aus dem Vergleich dieser Publikation mit dem Korpus.
Ähnliche Publikationen vergleichen
Die nächsten Publikationen nach System, Materialien und Organismen, mit ihren Ergebnissen nebeneinander.
Quell-PDF
Die Publikation, wie sie erschienen ist.
Repräsentatives Modell, generisches MFC
Zum Interagieren tippenRepräsentatives Modell, generisches MFC
Repräsentatives Modell: MFC – zugeordnet nur anhand des Systemtyps der Publikation, nicht ihres Reaktors oder ihrer Geometrie.
Schlagwörter
- Microbial fuel cell
- Activated carbon
- Anode
- Adsorption
- Nitrogen
- Faraday efficiency
Zitieren
Xiaoou Wang, Ming Xue, Zhaoyu Wang et al. (2024). Integrated Constructed Wetland–Microbial Fuel Cell Systems Using Activated Carbon: Structure-Activity Relationship of Activated Carbon, Removal Performance of Organics and Nitrogen. Water. https://doi.org/10.3390/w16020278
- Zeitschrift
- Water
Öffnen Sie das Modell im Labor, um alle Steuerelemente, die Parameterbearbeitung und Vorlagen-Overlays zu nutzen.
Im Labor öffnen