Forschungsdaten – Titel und Zusammenfassungen von Publikationen, extrahierte Daten und Katalogeinträge – erscheinen in ihrer Originalsprache Englisch.
Publikation
On‐line Electrode Dissolution Monitoring during Organic Electrosynthesis: Direct Evidence of Electrode Dissolution during Kolbe Electrolysis
Zusammenfassung
Was die Publikation berichtet, in ihren eigenen Worten.
Zusammenfassung
Electrode dissolution was monitored in real‐time during Kolbe electrolysis along with the characteristic products. The fast determination of appropriate reaction conditions in electro‐organic chemistry enables the minimization of electrode degradation while keeping an eye on the optimal formation rate and distribution of products. Herein, essential parameters influencing the dissolution of the electrode material platinum in a Kolbe electrolysis were pinpointed. The formation of reaction products and soluble platinum species were monitored during potentiodynamic and potentiostatic experiments using an electroanalytical flow cell coupled to two different mass spectrometers. The approach opens new vistas in the field of electro‐organic chemistry because it enables precise and quick quantification of dissolved metals during electrosynthesis, also involving electrode materials other than platinum. Furthermore, it draws attention to the vital topic of electrode stability in electro‐organic synthesis, which becomes increasingly important for the implementation of green chemical processes utilizing renewable energy.
Extrahierte Werte
Jeder aus der Publikation entnommene Wert mit seiner Quelle, damit sich jede Zahl am Text prüfen lässt.
n = 32 extrahierte Werte
Wählen Sie eine Quellenangabe, um Zitat, Seite und Konfidenz hinter einem Wert zu sehen.
0 von 32 extrahierten Zeilen modellierbar
- 32 nicht kanonisiert (kein kanonischer Slug)
| Parameter | Wert | Einheit | Konfidenz | Quelle | Anmerkungen | Modellierbar |
|---|---|---|---|---|---|---|
| Fraction of internal resistance compensated (iR compensation) | 85 | % | 100 % | extrahiert | "85 % of the determined internal resistance was compensated for during the measur…" · cell=electroanalytical flow cell (EFC), acids=["acetic acid"], solvent=methanol, electrode=polycrystalline Pt | Ausgeschlossen: nicht kanonisiert (kein kanonischer Slug) |
| Current density in galvanostatic measurements | 5 | mA cm⁻² | 100 % | extrahiert | "The method was also applied during galvanostatic measurements at 5, 10, 15, and …" · acids=["acetic acid"], solvent=methanol, electrode=polycrystalline Pt, electrolyte=1 mol L−1 acetic acid, 0.1 mol L−1 LiOH in methanol | Ausgeschlossen: nicht kanonisiert (kein kanonischer Slug) |
| Electrolyte flow rate through electroanalytical flow cell | 150 | μL min⁻¹ | 100 % | extrahiert | "The electrolyte was pumped through the EFC with a flow rate of 150 μL min-1 usin…" · cell=electroanalytical flow cell (EFC), acids=["acetic acid"], solvent=methanol, electrode=polycrystalline Pt | Ausgeschlossen: nicht kanonisiert (kein kanonischer Slug) |
| Scan rate of cyclic voltammetry | 10 | mV s⁻¹ | 100 % | extrahiert | "The potential was cycled between -0.5 and 3 V with a scan rate of 10 mV s-1." · acids=["acetic acid"], solvent=methanol, electrode=polycrystalline Pt, electrolyte=LiOH, NEt3 and NEt3+H2O electrolytes | Ausgeschlossen: nicht kanonisiert (kein kanonischer Slug) |
| Added H₂O concentration in NEt3 electrolyte | 0,1 | mol L⁻¹ | 100 % | extrahiert | "Hence, an additional electrolyte system with 1 mol L-1 acetic acid, 0.1 mol L-1 …" · acids=["acetic acid"], solvent=methanol, electrode=polycrystalline Pt, electrolyte=1 mol L−1 acetic acid, 0.1 mol L−1 NEt3, 0.1 mol L−1 H2O in methanol | Ausgeschlossen: nicht kanonisiert (kein kanonischer Slug) |
| Water content of electrolyte with NEt3 | 65 | ppm | 100 % | karl fischer coulometry (917 coulometer) | "Determined water contents of electrolytes: methanol containing 1 mol L-1 acetic …" · acids=["acetic acid"], solvent=methanol, electrode=polycrystalline Pt, electrolyte=1 mol L−1 acetic acid, 0.1 mol L−1 NEt3 in methanol | Ausgeschlossen: nicht kanonisiert (kein kanonischer Slug) |
| Water content of electrolyte with LiOH | 2.280 | ppm | 100 % | karl fischer coulometry (917 coulometer) | "Determined water contents of electrolytes: methanol containing 1 mol L-1 acetic …" · acids=["acetic acid"], solvent=methanol, electrode=polycrystalline Pt, electrolyte=1 mol L−1 acetic acid, 0.1 mol L−1 LiOH in methanol | Ausgeschlossen: nicht kanonisiert (kein kanonischer Slug) |
| Anodic polarization times varied at 3 V | 1 | min | 100 % | extrahiert | "Kolbe electrolysis in the course of chronoamperometric measurements at 3 V vs. F…" · acids=["acetic acid"], solvent=methanol, electrode=polycrystalline Pt, potential=3 V vs. Fc/Fc+ | Ausgeschlossen: nicht kanonisiert (kein kanonischer Slug) |
| Acetic acid concentration in methanol electrolyte | 1 | mol L⁻¹ | 100 % | extrahiert | "Hence, an additional electrolyte system with 1 mol L-1 acetic acid, 0.1 mol L-1 …" · acids=["acetic acid"], solvent=methanol, electrode=polycrystalline Pt, electrolyte=methanol-based, LiOH or NEt3 base | Ausgeschlossen: nicht kanonisiert (kein kanonischer Slug) |
| NEt3 base concentration in methanol electrolyte | 0,1 | mol L⁻¹ | 100 % | extrahiert | "Hence, an additional electrolyte system with 1 mol L-1 acetic acid, 0.1 mol L-1 …" · acids=["acetic acid"], cation=NEt3H+, solvent=methanol, electrode=polycrystalline Pt | Ausgeschlossen: nicht kanonisiert (kein kanonischer Slug) |
| Duration of cathodic potential step | 10 | min | 100 % | extrahiert | "(a) Kolbe electrolysis in the course of a chronoamperometric measurement at 3 V …" · acids=["acetic acid"], solvent=methanol, electrode=polycrystalline Pt, electrolyte=LiOH, NEt3 and NEt3+0.1 mol L−1 H2O electrolytes | Ausgeschlossen: nicht kanonisiert (kein kanonischer Slug) |
| Anodic polarization time (Figure 1 experiment) | 3 | min | 100 % | extrahiert | "(a) Kolbe electrolysis in the course of a chronoamperometric measurement at 3 V …" · acids=["acetic acid"], solvent=methanol, electrode=polycrystalline Pt, electrolyte=LiOH, NEt3 and NEt3+0.1 mol L−1 H2O electrolytes | Ausgeschlossen: nicht kanonisiert (kein kanonischer Slug) |
| Anodic potential step (Figure 1 experiment) | 3 | V vs. Fc/Fc+ | 100 % | extrahiert | "(a) Kolbe electrolysis in the course of a chronoamperometric measurement at 3 V …" · acids=["acetic acid"], solvent=methanol, electrode=polycrystalline Pt, electrolyte=LiOH, NEt3 and NEt3+0.1 mol L−1 H2O electrolytes | Ausgeschlossen: nicht kanonisiert (kein kanonischer Slug) |
| Cathodic potential step following anodic step | -0,5 | V vs. Fc/Fc+ | 100 % | extrahiert | "(a) Kolbe electrolysis in the course of a chronoamperometric measurement at 3 V …" · acids=["acetic acid"], solvent=methanol, electrode=polycrystalline Pt, electrolyte=LiOH, NEt3 and NEt3+0.1 mol L−1 H2O electrolytes | Ausgeschlossen: nicht kanonisiert (kein kanonischer Slug) |
| Water content of electrolyte with NEt3 and 0.1 mol L−1 H₂O | 2.310 | ppm | 100 % | karl fischer coulometry (917 coulometer) | "Determined water contents of electrolytes: methanol containing 1 mol L-1 acetic …" · acids=["acetic acid"], solvent=methanol, electrode=polycrystalline Pt, electrolyte=1 mol L−1 acetic acid, 0.1 mol L−1 NEt3, 0.1 mol L−1 H2O in methanol | Ausgeschlossen: nicht kanonisiert (kein kanonischer Slug) |
| Potential window of cyclic voltammetry | -0,5 | V vs. Fc/Fc+ | 95 % | extrahiert | "The potential was cycled between -0.5 and 3 V with a scan rate of 10 mV s-1." · acids=["acetic acid"], solvent=methanol, electrode=polycrystalline Pt, electrolyte=LiOH, NEt3 and NEt3+H2O electrolytes | Ausgeschlossen: nicht kanonisiert (kein kanonischer Slug) |
| Anodic potentials applied in chronoamperometry | 1 | V vs. Fc/Fc+ | 95 % | extrahiert | "We conducted chronoamperometric measurements in the EFC at three different anodi…" · acids=["acetic acid"], solvent=methanol, electrode=polycrystalline Pt, electrolyte=LiOH, NEt3 and NEt3+H2O electrolytes | Ausgeschlossen: nicht kanonisiert (kein kanonischer Slug) |
| Shift of oxidation current onset to more negative potentials with 0.1 mol L−1 water | 300 | mV | 95 % | extrahiert | "In systems with 0.1 mol L-1 water present (LiOH and NEt3+H2O), the onset of oxid…" · acids=["acetic acid"], solvent=methanol, electrode=polycrystalline Pt, scan_rate=10 mV s−1 | Ausgeschlossen: nicht kanonisiert (kein kanonischer Slug) |
| LiOH base concentration in methanol electrolyte | 0,1 | mol L⁻¹ | 95 % | extrahiert | "in methanol containing 1 mol L-1 acetic acid and 0.1 mol L-1 LiOH (left), NEt3 (…" · acids=["acetic acid"], cation=Li+, solvent=methanol, electrode=polycrystalline Pt | Ausgeschlossen: nicht kanonisiert (kein kanonischer Slug) |
| Internal resistance of the electroanalytical flow cell | 40 | Ω | 90 % | electrochemical impedance | "Resistance varied between 40 and 200 Ω depending on the conductivity of the elec…" · cell=electroanalytical flow cell (EFC), acids=["acetic acid"], solvent=methanol, electrode=polycrystalline Pt | Ausgeschlossen: nicht kanonisiert (kein kanonischer Slug) |
| Anodic potential at which substantial product formation was first observed | 3 | V vs. Fc/Fc+ | 90 % | extrahiert | "Substantial product formation in all three electrolytes was observed first at 3 …" · acids=["acetic acid"], solvent=methanol, electrode=polycrystalline Pt, electrolyte=LiOH, NEt3 and NEt3+H2O electrolytes | Ausgeschlossen: nicht kanonisiert (kein kanonischer Slug) |
| Onset potential of Pt dissolution in NEt3 electrolyte | 0,8 | V vs. Fc/Fc+ | 90 % | extrahiert | "Pt dissolution for the system containing NEt3 starts at around 0.8 V, approximat…" · acids=["acetic acid"], solvent=methanol, electrode=polycrystalline Pt, scan_rate=10 mV s−1 | Ausgeschlossen: nicht kanonisiert (kein kanonischer Slug) |
| Onset potential of Kolbe product formation | 1,8 | V vs. Fc/Fc+ | 90 % | olems | "The Kolbe product formation occurs around 1.8 V for all electrolytes, independen…" · acids=["acetic acid"], solvent=methanol, electrode=polycrystalline Pt, scan_rate=10 mV s−1 | Ausgeschlossen: nicht kanonisiert (kein kanonischer Slug) |
| Stable (steady-state) Pt dissolution rate in water-free NEt3 electrolyte | 90 | pg s⁻¹ cm⁻² | 90 % | on-line icp-ms (electroanalytical flow cell) | "The stable value lies at around 90 pg s-1 cm-2 in the water-free system." · acids=["acetic acid"], solvent=methanol, electrode=polycrystalline Pt, potential=3 V vs. Fc/Fc+ | Ausgeschlossen: nicht kanonisiert (kein kanonischer Slug) |
| Shift of oxide reduction (cathodic dissolution) onset to negative potentials | 600 | mV | 85 % | extrahiert | "The onset of the oxide reduction, which is expressed as cathodic dissolution in …" · acids=["acetic acid"], solvent=methanol, electrode=polycrystalline Pt, scan_rate=10 mV s−1 | Ausgeschlossen: nicht kanonisiert (kein kanonischer Slug) |
Extraktionspipeline
Rohextraktionen, Artefakte, Qualitätssignal
Extraktionsqualität
EhrlichkeitssignalBemessen Sie Ihr Vertrauen in die extrahierten Inhalte an diesen Signalen – so hat die Pipeline ihre eigene Ausgabe für diese Publikation bewertet.
Mittlere Parameterkonfidenz
90 %
Durchschnittliche Konfidenz der oben angezeigten PaperParameter-Zeilen
vor dem Zitieren mit dem Quell-PDF abgleichen · Werte 0–1
Diagramm-Explorer
Verändern Sie die Eingaben dieser Publikation und sehen Sie, wie sich das vorhergesagte Ergebnis verschiebt.
Modell erkunden
Der Reaktor in 3D, mit Strömung, die sich ein- und ausschalten lässt.
KI-Erkenntnisse
Widersprüche, Lücken und Chancen aus dem Vergleich dieser Publikation mit dem Korpus.
Ähnliche Publikationen vergleichen
Die nächsten Publikationen nach System, Materialien und Organismen, mit ihren Ergebnissen nebeneinander.
Quell-PDF
Die Publikation, wie sie erschienen ist.
Dieser Publikation ist noch kein 3D-Modell zugeordnet. Die daraus extrahierten Werte stehen unter „Extrahierte Werte“.
Schlagwörter
- electrode dissolution
- Kolbe electrolysis
- electroorganic synthesis
- mass spectrometry
- online monitoring
- electrode stability
- platinum dissolution
Zitieren
Johanna Ranninger, Pavlo Nikolaienko, Karl J. J. Mayrhofer et al. (2022). On‐line Electrode Dissolution Monitoring during Organic Electrosynthesis: Direct Evidence of Electrode Dissolution during Kolbe Electrolysis. ChemSusChem. https://doi.org/10.1002/cssc.202102228
- Zeitschrift
- ChemSusChem