Forschungsdaten – Titel und Zusammenfassungen von Publikationen, extrahierte Daten und Katalogeinträge – erscheinen in ihrer Originalsprache Englisch.
Publikation
Anion intercalation enables efficient and stable carboxylate upgrading via aqueous non-Kolbe electrolysis
Zusammenfassung
Was die Publikation berichtet, in ihren eigenen Worten.
Zusammenfassung
Next-generation techniques for sustainable carboxylate production generate carboxylate salts as the primary outcome. To circumvent the costly conversion of carboxylate salts to acids, we demonstrate the aqueous (non-)Kolbe electrolysis process as an alternative strategy to generate downstream value-added chemicals. Upon revealing the irreversible oxidation-induced charge transfer inhibition on the graphite anode, we propose an anion intercalation strategy to mitigate the stability problem induced by the ever-increasing overpotential. In acetate decarboxylation, we observe a high Faradaic efficiency of ~95% for non-Kolbe products (methanol and methyl acetate) at wide current densities ranging from 0.05 to 1 A cm⁻² and long-term stability at current densities of 0.15 and 0.6 A cm⁻² for 130 and 35 h, respectively. We also extended this strategy for the upgrading of long-chain carboxylates such as propionate, butyrate, and succinate. Our work provides valuable guidance for carboxylate upgrading and extendable strategy for overcoming passivation challenges in catalysis. Here, the authors propose an anion intercalation strategy to mitigate the stability problem of aqueous non-Kolbe electrolysis, which enables the efficient upgrading of carboxylate salts to value-added chemicals.
Extrahierte Werte
Jeder aus der Publikation entnommene Wert mit seiner Quelle, damit sich jede Zahl am Text prüfen lässt.
n = 63 extrahierte Werte
Wählen Sie eine Quellenangabe, um Zitat, Seite und Konfidenz hinter einem Wert zu sehen.
0 von 63 extrahierten Zeilen modellierbar
- 63 nicht kanonisiert (kein kanonischer Slug)
| Parameter | Wert | Einheit | Konfidenz | Quelle | Anmerkungen | Modellierbar |
|---|---|---|---|---|---|---|
| Catholyte H2SO4 concentration | 1 | M | 95 % | extrahiert | "A carboxylate solution of 2 mL min-1 was pumped into the anode side, and a 1 M H…" · cell=flow cell, Nafion 115 membrane, electrolyte=H2SO4 (catholyte) | Ausgeschlossen: nicht kanonisiert (kein kanonischer Slug) |
| Electrode area | 0,75 | cm² | 95 % | extrahiert | "The electrode area is 0.75 cm2." · electrode=graphite | Ausgeschlossen: nicht kanonisiert (kein kanonischer Slug) |
| Volume of the anodic and cathodic chambers | 5 | mL | 95 % | extrahiert | "The volume of the anodic and cathodic chambers is 5 mL." · cell=customized flow reactor | Ausgeschlossen: nicht kanonisiert (kein kanonischer Slug) |
| Catholyte (H2SO4) flow rate | 2 | mL min⁻¹ | 95 % | extrahiert | "A carboxylate solution of 2 mL min-1 was pumped into the anode side, and a 1 M H…" · cell=flow cell, Nafion 115 membrane, electrolyte=1 M H2SO4 (catholyte) | Ausgeschlossen: nicht kanonisiert (kein kanonischer Slug) |
| Anolyte (carboxylate solution) flow rate | 2 | mL min⁻¹ | 95 % | extrahiert | "A carboxylate solution of 2 mL min-1 was pumped into the anode side, and a 1 M H…" · cell=flow cell, Nafion 115 membrane, electrode=graphite | Ausgeschlossen: nicht kanonisiert (kein kanonischer Slug) |
| Current density of the succinate stability test (Fig. 4e) | 0,1 | A cm⁻² | 95 % | extrahiert | "0.5 M monosodium succinate (NaSA) (pH= 6.50 ± 0.33) with or without the addition…" · ph=6.50 ± 0.33, acids=["succinate"], electrode=graphite, electrolyte=0.5 M NaSA | Ausgeschlossen: nicht kanonisiert (kein kanonischer Slug) |
| Propionic acid and sodium propionate concentration (Fig. 4c) | 1 | M | 95 % | extrahiert | "1 M propionic acid (HPr) and 1 M sodium propionate (NaPr) (pH= 4.88 ± 0.10) with…" · acids=["propionate"], electrode=graphite, electrolyte=1 M HPr + 1 M NaPr, current_density=0.3 A cm−2 | Ausgeschlossen: nicht kanonisiert (kein kanonischer Slug) |
| Current density of the alkaline 2 M NaAc stability test (Fig. 4b) | 0,5 | A cm⁻² | 95 % | extrahiert | "2 M NaAc and 0.1 M NaOH (pH= 12.9 ± 0.20) with or without the addition of NaClO4…" · ph=12.9 ± 0.20, acids=["acetate"], electrode=graphite, electrolyte=2 M NaAc + 0.1 M NaOH | Ausgeschlossen: nicht kanonisiert (kein kanonischer Slug) |
| Butyric acid and sodium butyrate concentration (Fig. 4d) | 1 | M | 95 % | extrahiert | "1 M butyric acid (HBu) and 1 M sodium butyrate (NaBu) (pH= 4.82 ± 0.25) with or …" · acids=["butyrate"], electrode=graphite, electrolyte=1 M HBu + 1 M NaBu, current_density=0.2 A cm−2 | Ausgeschlossen: nicht kanonisiert (kein kanonischer Slug) |
| Current density of the butyrate stability test (Fig. 4d) | 0,2 | A cm⁻² | 95 % | extrahiert | "1 M butyric acid (HBu) and 1 M sodium butyrate (NaBu) (pH= 4.82 ± 0.25) with or …" · ph=4.82 ± 0.25, acids=["butyrate"], electrode=graphite, electrolyte=1 M HBu + 1 M NaBu | Ausgeschlossen: nicht kanonisiert (kein kanonischer Slug) |
| Levulinic acid and sodium levulinate concentration (Fig. 4f) | 1 | M | 95 % | extrahiert | "1 M levulinic acid (HLA) and 1 M sodium levulinate (NaLA) (pH= 4.65 ± 0.13) with…" · acids=["levulinate"], electrode=graphite, electrolyte=1 M HLA + 1 M NaLA, current_density=0.1 A cm−2 | Ausgeschlossen: nicht kanonisiert (kein kanonischer Slug) |
| pH of 1 M HPr + 1 M NaPr electrolyte (Fig. 4c) | 4,88 ± 0.10 | — | 95 % | extrahiert | "1 M propionic acid (HPr) and 1 M sodium propionate (NaPr) (pH= 4.88 ± 0.10) with…" · acids=["propionate"], electrode=graphite, electrolyte=1 M HPr + 1 M NaPr, current_density=0.3 A cm−2 | Ausgeschlossen: nicht kanonisiert (kein kanonischer Slug) |
| Current density of the 2 M NaAc stability test (Fig. 4a) | 0,3 | A cm⁻² | 95 % | extrahiert | "an electrolyte containing 2 M NaAc (pH= 8.50 ± 0.25) with or without the additio…" · ph=8.50 ± 0.25, acids=["acetate"], electrode=graphite, electrolyte=2 M NaAc | Ausgeschlossen: nicht kanonisiert (kein kanonischer Slug) |
| pH of 1 M HBu + 1 M NaBu electrolyte (Fig. 4d) | 4,82 ± 0.25 | — | 95 % | extrahiert | "1 M butyric acid (HBu) and 1 M sodium butyrate (NaBu) (pH= 4.82 ± 0.25) with or …" · acids=["butyrate"], electrode=graphite, electrolyte=1 M HBu + 1 M NaBu, current_density=0.2 A cm−2 | Ausgeschlossen: nicht kanonisiert (kein kanonischer Slug) |
| Current density of the propionate stability test (Fig. 4c) | 0,3 | A cm⁻² | 95 % | extrahiert | "1 M propionic acid (HPr) and 1 M sodium propionate (NaPr) (pH= 4.88 ± 0.10) with…" · ph=4.88 ± 0.10, acids=["propionate"], electrode=graphite, electrolyte=1 M HPr + 1 M NaPr | Ausgeschlossen: nicht kanonisiert (kein kanonischer Slug) |
| Current density of the levulinate stability test (Fig. 4f) | 0,1 | A cm⁻² | 95 % | extrahiert | "1 M levulinic acid (HLA) and 1 M sodium levulinate (NaLA) (pH= 4.65 ± 0.13) with…" · ph=4.65 ± 0.13, acids=["levulinate"], electrode=graphite, electrolyte=1 M HLA + 1 M NaLA | Ausgeschlossen: nicht kanonisiert (kein kanonischer Slug) |
| Monosodium succinate (NaSA) concentration (Fig. 4e) | 0,5 | M | 95 % | extrahiert | "0.5 M monosodium succinate (NaSA) (pH= 6.50 ± 0.33) with or without the addition…" · acids=["succinate"], electrode=graphite, electrolyte=0.5 M NaSA, current_density=0.1 A cm−2 | Ausgeschlossen: nicht kanonisiert (kein kanonischer Slug) |
| Sodium acetate concentration (Fig. 4a, no acetic acid) | 2 | M | 95 % | extrahiert | "an electrolyte containing 2 M NaAc (pH= 8.50 ± 0.25) with or without the additio…" · acids=["acetate"], electrode=graphite, electrolyte=2 M NaAc, current_density=0.3 A cm−2 | Ausgeschlossen: nicht kanonisiert (kein kanonischer Slug) |
| pH of 2 M NaAc + 0.1 M NaOH electrolyte (Fig. 4b) | 12,9 ± 0.20 | — | 95 % | extrahiert | "2 M NaAc and 0.1 M NaOH (pH= 12.9 ± 0.20) with or without the addition of NaClO4…" · acids=["acetate"], electrode=graphite, electrolyte=2 M NaAc + 0.1 M NaOH, current_density=0.5 A cm−2 | Ausgeschlossen: nicht kanonisiert (kein kanonischer Slug) |
| pH of 1 M HLA + 1 M NaLA electrolyte (Fig. 4f) | 4,65 ± 0.13 | — | 95 % | extrahiert | "1 M levulinic acid (HLA) and 1 M sodium levulinate (NaLA) (pH= 4.65 ± 0.13) with…" · acids=["levulinate"], electrode=graphite, electrolyte=1 M HLA + 1 M NaLA, current_density=0.1 A cm−2 | Ausgeschlossen: nicht kanonisiert (kein kanonischer Slug) |
| Stability duration at 0.6 A cm-2 without significant degradation (NaClO4 system) | 35 | h | 95 % | extrahiert | "the stability of the NaClO4 system at a higher current density of 0.6 A cm-2 sho…" · acids=["acetate"], electrode=graphite, electrolyte=2 M NaAc + 2 M HAc + 0.1 M NaClO4, current_density=0.6 A cm−2 | Ausgeschlossen: nicht kanonisiert (kein kanonischer Slug) |
| pH of 2 M NaAc + 2 M HAc electrolyte | 4,75 ± 0.15 | — | 95 % | extrahiert | "2 M NaAc and 2 M HAc (pH=4.75 ± 0.15)" · acids=["acetate"], electrode=graphite, electrolyte=2 M NaAc + 2 M HAc, current_density=0.15 A cm−2 | Ausgeschlossen: nicht kanonisiert (kein kanonischer Slug) |
| Current density range of the pre-/post-deactivation comparison | 0,05 | A cm⁻² | 95 % | extrahiert | "wide range of current densities from 0.05 to 0.3 A cm-2" · acids=["acetate"], electrode=graphite, electrolyte=2 M NaAc + 2 M HAc | Ausgeschlossen: nicht kanonisiert (kein kanonischer Slug) |
| NaClO4 concentration added to the electrolyte | 0,1 | M | 95 % | extrahiert | "with the addition of 0.1 M NaClO4, we observed rapid recovery of the anode poten…" · electrode=graphite, electrolyte=2 M NaAc + 2 M HAc + 0.1 M NaClO4, current_density=0.3 A cm−2 | Ausgeschlossen: nicht kanonisiert (kein kanonischer Slug) |
| Acetic acid (HAc) concentration | 2 | M | 95 % | extrahiert | "buffered solution containing 2 M acetate sodium (NaAc) and 2 M acetic acid (HAc)…" · electrode=graphite, electrolyte=2 M NaAc + 2 M HAc, current_density=0.15 A cm−2 | Ausgeschlossen: nicht kanonisiert (kein kanonischer Slug) |
Extraktionspipeline
Rohextraktionen, Artefakte, Qualitätssignal
Extraktionsqualität
EhrlichkeitssignalBemessen Sie Ihr Vertrauen in die extrahierten Inhalte an diesen Signalen – so hat die Pipeline ihre eigene Ausgabe für diese Publikation bewertet.
Mittlere Parameterkonfidenz
91 %
Durchschnittliche Konfidenz der oben angezeigten PaperParameter-Zeilen
vor dem Zitieren mit dem Quell-PDF abgleichen · Werte 0–1
Diagramm-Explorer
Verändern Sie die Eingaben dieser Publikation und sehen Sie, wie sich das vorhergesagte Ergebnis verschiebt.
Modell erkunden
Der Reaktor in 3D, mit Strömung, die sich ein- und ausschalten lässt.
KI-Erkenntnisse
Widersprüche, Lücken und Chancen aus dem Vergleich dieser Publikation mit dem Korpus.
Ähnliche Publikationen vergleichen
Die nächsten Publikationen nach System, Materialien und Organismen, mit ihren Ergebnissen nebeneinander.
Quell-PDF
Die Publikation, wie sie erschienen ist.
Dieser Publikation ist noch kein 3D-Modell zugeordnet. Die daraus extrahierten Werte stehen unter „Extrahierte Werte“.
Schlagwörter
- succinic acid
- butyrate
- anion intercalation
- Faradaic efficiency
- methyl acetate
- propionate
- methanol synthesis
Zitieren
Xinyan Zhang, Laihao Luo, Chunxiao Liu et al. (2025). Anion intercalation enables efficient and stable carboxylate upgrading via aqueous non-Kolbe electrolysis. Nature Communications. https://doi.org/10.1038/s41467-025-58924-x
- Zeitschrift
- Nature Communications