Forschungsdaten – Titel und Zusammenfassungen von Publikationen, extrahierte Daten und Katalogeinträge – erscheinen in ihrer Originalsprache Englisch.

Forschung

Publikation · MES

Microbial Electrosynthesis Using 3D Bioprinting of Sporomusa ovata on Copper, Stainless-Steel, and Titanium Cathodes for CO2 Reduction

01

Zusammenfassung

Was die Publikation berichtet, in ihren eigenen Worten.

Interaktives 3D-ModellKI-angereichert· 100 %Substrat ·complex media

Zusammenfassung

Acetate can be produced from carbon dioxide (CO2) and electricity using bacteria at the cathode of microbial electrosynthesis (MES). This process relies on electrolytically-produced hydrogen (H2). However, the low solubility of H2 can limit the process. Using metal cathodes to generate H2 at a high rate can improve MES. Immobilizing bacteria on the metal cathode can further proliferate the H2 availability to the bacteria. In this study, we investigated the performances of 3D bioprinting of Sporomusa ovata on three metal meshes—copper (Cu), stainless steel (SS), and titanium (Ti), when used individually as a cathode in MES. Bacterial cells were immobilized on the metal using a 3D bioprinter with alginate hydrogel ink. The bioprinted Ti mesh exhibited higher acetate production (53 ± 19 g/m²/d) at −0.8 V vs. Ag/AgCl as compared to other metal cathodes. More than 9 g/L of acetate was achieved with bioprinted Ti, and the least amount was obtained with bioprinted Cu. Although all three metals are known for catalyzing H2 evolution, the lower biocompatibility and chemical stability of Cu hampered its performance. Stable and biocompatible Ti supported the bioprinted S. ovata effectively. Bioprinting of synthetic biofilm on H2-evolving metal cathodes can provide high-performing and robust biocathodes for further application of MES.

KI-Zusammenfassung

100 % Konfidenz

Specialized MES research in materials-science focusing on novel-materials, substrates. Acetate can be produced from carbon dioxide (CO2) and electricity using bacteria at the cathode of microbial electrosynthe...

Erstellt von der MESSAI-Extraktionspipeline · mit dem Quell-PDF abgleichen

02

Extrahierte Werte

Jeder aus der Publikation entnommene Wert mit seiner Quelle, damit sich jede Zahl am Text prüfen lässt.

n = 110 extrahierte Werte

Wählen Sie eine Quellenangabe, um Zitat, Seite und Konfidenz hinter einem Wert zu sehen.

42 von 109 extrahierten Zeilen modellierbar

  • 25 nicht kanonisiert (kein kanonischer Slug)
  • 40 kein SI-Wert
  • 2 nicht als modellierbar markiert
ParameterWertEinheitKonfidenzQuelleAnmerkungenModellierbar
Substrateacetate—80 %
llm
Acetic Acid Concentration×2157mM95 %
hplc analysis
"This study Synthetic biofilm on Ti −0.8 0.34 ± 0.12 53 ± 19 55 ± 20.1 157" · T=35°C, substrate=CO2Ausgeschlossen: kein SI-Wert
Acetate Production Rate×20,1g/L/d95 %
batch mes operation with hplc sampling
"maintaining an average rate of 0.1 ± 0.01 g/L/d (24.6 ± 8.8 g/m2/d)" · T=35°C, substrate=CO2Modellierbar
Acetate Production Rate×20,1g/L/d95 %
batch mes operation with hplc sampling
"After day 18, the acetate production continued steadily at an average rate of 0.…" · T=35°C, substrate=CO2Modellierbar
Acetic Acid Concentration×24g/L95 %
hplc analysis
"reaching a concentration of 4 g/L acetate. After day 18, the acetate production …" · T=35°C, substrate=CO2Modellierbar
Acetic Acid Concentration×20,74g/L95 %
hplc analysis
"The production continued steadily and reached 0.74 g/L of acetate in 8 days" · T=35°C, substrate=CO2Modellierbar
Acetic Acid Concentration×22,6g/L95 %
hplc analysis
"The accumulation of slightly more than 2.5 g/L of acetate corresponds to 51% of …" · T=35°C, substrate=CO2Modellierbar
Acetate Production Rate×224,6g/m²/d95 %
batch mes operation
"maintaining an average rate of 0.1 ± 0.01 g/L/d (24.6 ± 8.8 g/m2/d)" · T=35°C, substrate=CO2Ausgeschlossen: kein SI-Wert
Cathode Area Cell×270mm95 %
electrode specification
"The titanium mesh was of size 28 mm × 70 mm" · T=35°CAusgeschlossen: kein SI-Wert
Acetate Production Rate×253g/m²/d95 %
batch mes operation
"The bioprinted Ti mesh exhibited higher acetate production (53 ± 19 g/m2/d) at −…" · T=35°C, substrate=CO2Ausgeschlossen: kein SI-Wert
Acetic Acid Concentration×243mM95 %
hplc analysis
"This study Synthetic biofilm on SS −0.8 to −1 0.1 ± 0.01 24.6 ± 8.8 51 43" · T=35°C, substrate=CO2Ausgeschlossen: kein SI-Wert
Acetate Production Rate×230,2g/m²/d95 %
batch mes operation
"The highest acetate production rate at this initial period of operation in CuBP1…" · T=35°C, substrate=CO2Ausgeschlossen: kein SI-Wert
Substrate Concentration×20,5g/L95 %
media preparation
"A small amount of yeast extract (0.5 g/L) was added to the media to help with in…" · T=35°C, substrate=yeast extractModellierbar
Acetic Acid Concentration×21,74g/L95 %
hplc analysis
"reaching 1.74 g/L after 72 days of operation" · T=35°C, substrate=CO2Modellierbar
Acetic Acid Concentration×29g/L95 %
hplc analysis
"More than 9 g/L of acetate was achieved with bioprinted Ti" · T=35°C, substrate=CO2Modellierbar
Cathode Potential×2-0,8V vs. Ag/AgCl95 %
potentiostat control
"The metal cathodes with 3D-bioprinted S. ovata were used as working electrodes w…" · T=35°C, substrate=CO2Ausgeschlossen: nicht als modellierbar markiert
Acetate Production Rate×238,6g/m²/d95 %
batch mes operation with hplc sampling
"This acetate level corresponds to a highest production rate of 38.62 ± 1.4 g/m2/…" · T=35°C, substrate=CO2Ausgeschlossen: kein SI-Wert
Acetate Production Rate×20,34g/L/d95 %
batch mes operation with hplc sampling
"The acetate production stabilized after 4 days, and remained around 0.34 g/L/d (…" · T=35°C, substrate=CO2Modellierbar
Reactor Volume×2270mL95 %
reactor specification
"All experiments were carried out in standard H-type, dual-chambered glass reacto…" · T=35°C, substrate=CO2Modellierbar
Copper annealing time×28h95 %
thermal annealing
"The copper electrode was first annealed at 300 ◦C for 8 h to form a CuOx layer" · condition_hint=electrode pretreatment, electrode_material=copperAusgeschlossen: nicht kanonisiert (kein kanonischer Slug)
Ti cathode size×228mm95 %
electrode specification
"The titanium mesh was of size 28 mm × 70 mm" · T=35°CAusgeschlossen: nicht kanonisiert (kein kanonischer Slug)
Bioprint layer thickness×20,5mm95 %
3d bioprinting specification
"a single layer of hydrogel (15 mm × 15 mm, ~0.5 mm thick) was printed onto the c…" · T=35°CAusgeschlossen: nicht kanonisiert (kein kanonischer Slug)
Cu cathode size×225mm95 %
electrode specification
"The cathodes consisted of 25 mm × 25 mm sized square-shaped metal meshes of copp…" · T=35°CAusgeschlossen: nicht kanonisiert (kein kanonischer Slug)
Bioprint layer area×215mm95 %
3d bioprinting specification
"a single layer of hydrogel (15 mm × 15 mm, ~0.5 mm thick) was printed onto the c…" · T=35°CAusgeschlossen: nicht kanonisiert (kein kanonischer Slug)
SS cathode size×225mm95 %
electrode specification
"The cathodes consisted of 25 mm × 25 mm sized square-shaped metal meshes of copp…" · T=35°CAusgeschlossen: nicht kanonisiert (kein kanonischer Slug)
25 von 57 angezeigt

Methodik

Welches System und wie es betrieben wurde

Methodik

Methodology

The study used 3D bioprinting to immobilize Sporomusa ovata bacteria on copper, stainless-steel, and titanium cathodes for microbial electrosynthesis (MES) to improve CO2 reduction.

Elektrodenspezifikationen

FeldWert
materials["stainless steel","titanium","copper"]

Leistungskennzahlen

FeldWert
citation count11

Betriebsparameter

FeldWert
substrate["acetate"]

Betriebsbedingungen

10 Läufe extrahiert
LaufT°CpHAnolytpHKatholytSubstrat[S]mg/LHRThModusR_extΩV_appVInokulum
v2-03a28a7fe995479435——CO2————-0.8—
v2-1cb8de6a8a4768a635—————————
v2-200f0d01292be90435——CO2————-0.9—
v2-2920f5c12bb784a035——CO2——————
v2-6cda6021ca447710———CO2————-0.93—
v2-8cccd5e802ce6d3735——yeast extract500—————
v2-9a9be007ed73e554———CO2————-1.4—
v2-d41d8cd98f00b204——————————
v2-f586e9af22985397——————————
v2-fce707ed4f4c685b———CO2————-0.6—

Extraktionspipeline

Rohextraktionen, Artefakte, Qualitätssignal

Extraktionsqualität

Ehrlichkeitssignal

Bemessen Sie Ihr Vertrauen in die extrahierten Inhalte an diesen Signalen – so hat die Pipeline ihre eigene Ausgabe für diese Publikation bewertet.

Parametervollständigkeit

50 %

Anteil der erwarteten Parameter, die extrahiert wurden

Datenvollständigkeit

60 %

Gesamtabdeckung der Extraktion über alle Felder

KI-Konfidenz

100 %

Vom Modell selbst angegebene Konfidenz

Mittlere Parameterkonfidenz

90 %

Durchschnittliche Konfidenz der oben angezeigten PaperParameter-Zeilen

vor dem Zitieren mit dem Quell-PDF abgleichen · Werte 0–1

03

Diagramm-Explorer

Verändern Sie die Eingaben dieser Publikation und sehen Sie, wie sich das vorhergesagte Ergebnis verschiebt.

04

Modell erkunden

Der Reaktor in 3D, mit Strömung, die sich ein- und ausschalten lässt.

05

KI-Erkenntnisse

Widersprüche, Lücken und Chancen aus dem Vergleich dieser Publikation mit dem Korpus.

06

Ähnliche Publikationen vergleichen

Die nächsten Publikationen nach System, Materialien und Organismen, mit ihren Ergebnissen nebeneinander.

07

Quell-PDF

Die Publikation, wie sie erschienen ist.

3D-Modell wird geladen …

Repräsentatives Modell, generisches mikrobielles elektrochemisches System

Repräsentatives Modell: mikrobielles elektrochemisches System – zugeordnet nur anhand des Systemtyps der Publikation, nicht ihres Reaktors oder ihrer Geometrie.

MES
System
110
Extrahierte Werte
2023
Jahr

In diesem Datensatz

Organismen, Parameter und Materialien, die diese Publikation berichtet. Jeder Eintrag verweist auf seine Seite.

Organismen · 1

Schlagwörter

  • Cathode
  • Titanium
  • Chemical engineering
  • Copper
  • Titanium dioxide
  • Biofilm

Zitieren

Suman Bajracharya, Adolf Krige, Leonidas Matsakas et al. (2023). Microbial Electrosynthesis Using 3D Bioprinting of Sporomusa ovata on Copper, Stainless-Steel, and Titanium Cathodes for CO2 Reduction. Fermentation. https://doi.org/10.3390/fermentation10010034

Zeitschrift
Fermentation

Öffnen Sie das Modell im Labor, um alle Steuerelemente, die Parameterbearbeitung und Vorlagen-Overlays zu nutzen.

Im Labor öffnen