Forschungsdaten – Titel und Zusammenfassungen von Publikationen, extrahierte Daten und Katalogeinträge – erscheinen in ihrer Originalsprache Englisch.
Publikation
Upgrading Potential of Waste Fermentation-Based C4-C5-C6 Carboxylic Acid Mixtures using Electrochemical Oxidative Decarboxylation
Zusammenfassung
Was die Publikation berichtet, in ihren eigenen Worten.
Zusammenfassung
Electrochemical upgrading techniques could provide a powerful tool to complement biorefineries processing waste materials, thereby making progress towards the electrification of these platforms. Among them, (non)-Kolbe electrolysis, that is, electrochemically driven oxidative decarboxylation of carboxylic acids, plays a key role as its product palette consists of alkanes (Kolbe products) as well as competing non-Kolbe products, including short-chain alkenes, alcohols, esters, ketones and aldehydes. The formation of alkanes takes place via the dimerization of radicals after the decarboxylation of carboxylic acids and requires relatively high acid concentrations (> 0.5 M) and a high current (> 200 mA cm⁻²). In this work, the upgrading potential of VFA mixtures of C4-C5-C6 acids under conditions representing real waste-based fermentation effluents (lower VFA concentrations) and a suboptimal current density (100 mA cm⁻²) was investigated. In addition, the effect of the initial VFA concentration ratios and the operation time (Faraday equivalents of FE = 0.25 and 1.0) on product selectivity and yields was studied. It was shown that mostly non-Kolbe products were formed – namely alcohols, esters and smaller amounts of ketones – in both experiments. An extended operation time favored ester and ketone formation, while alkanes (octane, nonane and decane) were presumably produced at the beginning of the electrolysis, since the process duration did not influence their yields. In addition, since butyric acid – the compound with the highest concentration in both model solutions – participated mostly in alcohol and ester formation, no butyrate radical dimerization (resulting in hexane) was observed. The results indicate that by not concentrating the VFAs in the fermentation effluents (via e.g. electrodialysis), the oxidative decarboxylation of VFAs at low/moderate current densities will likely result in non-Kolbe products.
Extrahierte Werte
Jeder aus der Publikation entnommene Wert mit seiner Quelle, damit sich jede Zahl am Text prüfen lässt.
n = 42 extrahierte Werte
Wählen Sie eine Quellenangabe, um Zitat, Seite und Konfidenz hinter einem Wert zu sehen.
0 von 42 extrahierten Zeilen modellierbar
- 42 nicht kanonisiert (kein kanonischer Slug)
| Parameter | Wert | Einheit | Konfidenz | Quelle | Anmerkungen | Modellierbar |
|---|---|---|---|---|---|---|
| Initial valeric acid (C5) concentration in experiment A | 0,11 | M | 95 % | extrahiert | "The applied ratios of initial concentrations of C4:C5:C6 acids were 0.23:0.11:0.…" · ph=7, cell=100 mL glass bottle reactor, 80 mL solution, time=83 mins, acids=["butyric acid","valeric acid","caproic acid"] | Ausgeschlossen: nicht kanonisiert (kein kanonischer Slug) |
| Initial butyric acid (C4) concentration in experiment A | 0,23 | M | 95 % | extrahiert | "The applied ratios of initial concentrations of C4:C5:C6 acids were 0.23:0.11:0.…" · ph=7, cell=100 mL glass bottle reactor, 80 mL solution, time=83 mins, acids=["butyric acid","valeric acid","caproic acid"] | Ausgeschlossen: nicht kanonisiert (kein kanonischer Slug) |
| Current density (galvanostatic) | 100 | mA cm⁻² | 95 % | extrahiert | "ensuring a fixed current density of j = 100 mA cm-2" · ph=7, acids=["butyric acid","valeric acid","caproic acid"], electrode=Pt plate, 2 cm2 each | Ausgeschlossen: nicht kanonisiert (kein kanonischer Slug) |
| Transferred charge in experiment A | 1.000 | C | 95 % | extrahiert | "In experiment A, the operation time was limited by the transfer of charge of Q =…" · ph=7, cell=100 mL glass bottle reactor, 80 mL solution, time=83 mins, acids=["butyric acid","valeric acid","caproic acid"] | Ausgeschlossen: nicht kanonisiert (kein kanonischer Slug) |
| Transferred charge in experiment B | 4.000 | C | 95 % | extrahiert | "In experiment B, the transferred charge was Q = 4000 C corresponding to t = 333 …" · ph=7, cell=80 mL heart-shaped borosilicate glass reactor, 60 mL solution, time=333 mins, acids=["butyric acid","valeric acid","caproic acid"] | Ausgeschlossen: nicht kanonisiert (kein kanonischer Slug) |
| Operation time in experiment A | 83 | mins | 95 % | extrahiert | "In experiment A, the operation time was limited by the transfer of charge of Q =…" · ph=7, cell=100 mL glass bottle reactor, 80 mL solution, time=83 mins, acids=["butyric acid","valeric acid","caproic acid"] | Ausgeschlossen: nicht kanonisiert (kein kanonischer Slug) |
| Initial caproic acid (C6) concentration in experiment B | 0,077 | M | 95 % | extrahiert | "The applied ratios of initial concentrations of C4:C5:C6 acids were 0.23:0.11:0.…" · ph=7, cell=80 mL heart-shaped borosilicate glass reactor, 60 mL solution, time=333 mins, acids=["butyric acid","valeric acid","caproic acid"] | Ausgeschlossen: nicht kanonisiert (kein kanonischer Slug) |
| Operation time in experiment B | 333 | mins | 95 % | extrahiert | "In experiment B, the transferred charge was Q = 4000 C corresponding to t = 333 …" · ph=7, cell=80 mL heart-shaped borosilicate glass reactor, 60 mL solution, time=333 mins, acids=["butyric acid","valeric acid","caproic acid"] | Ausgeschlossen: nicht kanonisiert (kein kanonischer Slug) |
| Initial valeric acid (C5) concentration in experiment B | 0,04 | M | 95 % | extrahiert | "The applied ratios of initial concentrations of C4:C5:C6 acids were 0.23:0.11:0.…" · ph=7, cell=80 mL heart-shaped borosilicate glass reactor, 60 mL solution, time=333 mins, acids=["butyric acid","valeric acid","caproic acid"] | Ausgeschlossen: nicht kanonisiert (kein kanonischer Slug) |
| Surface area of each Pt plate electrode | 2 | cm² | 95 % | extrahiert | "two Pt plate electrodes with a surface area of 2 cm2 each" · electrode=Pt plate, current_density=100 mA cm-2 | Ausgeschlossen: nicht kanonisiert (kein kanonischer Slug) |
| Initial caproic acid (C6) concentration in experiment A | 0,083 | M | 95 % | extrahiert | "The applied ratios of initial concentrations of C4:C5:C6 acids were 0.23:0.11:0.…" · ph=7, cell=100 mL glass bottle reactor, 80 mL solution, time=83 mins, acids=["butyric acid","valeric acid","caproic acid"] | Ausgeschlossen: nicht kanonisiert (kein kanonischer Slug) |
| Model VFA solution volume in experiment A | 80 | mL | 95 % | extrahiert | "Kolbe electrolysis was carried out in a 100 mL customized Schott laboratory glas…" · ph=7, cell=100 mL glass bottle reactor, 80 mL solution, time=83 mins, acids=["butyric acid","valeric acid","caproic acid"] | Ausgeschlossen: nicht kanonisiert (kein kanonischer Slug) |
| Reactor volume in experiment A | 100 | mL | 95 % | extrahiert | "Kolbe electrolysis was carried out in a 100 mL customized Schott laboratory glas…" · ph=7, cell=100 mL glass bottle reactor, 80 mL solution, time=83 mins, acids=["butyric acid","valeric acid","caproic acid"] | Ausgeschlossen: nicht kanonisiert (kein kanonischer Slug) |
| Reaction media volume in experiment B | 60 | mL | 95 % | extrahiert | "In experiment B, the reaction took place in an 80 mL heart-shaped borosilicate g…" · ph=7, cell=80 mL heart-shaped borosilicate glass reactor, 60 mL solution, time=333 mins, acids=["butyric acid","valeric acid","caproic acid"] | Ausgeschlossen: nicht kanonisiert (kein kanonischer Slug) |
| Reactor volume in experiment B | 80 | mL | 95 % | extrahiert | "In experiment B, the reaction took place in an 80 mL heart-shaped borosilicate g…" · ph=7, cell=80 mL heart-shaped borosilicate glass reactor, 60 mL solution, time=333 mins, acids=["butyric acid","valeric acid","caproic acid"] | Ausgeschlossen: nicht kanonisiert (kein kanonischer Slug) |
| Solution pH set with NaOH | 7 | — | 95 % | extrahiert | "The pH of the solution was set in both cases at 7 using 5 M NaOH" · ph=7 (adjusted with 5 M NaOH), acids=["butyric acid","valeric acid","caproic acid"], electrode=Pt plate, 2 cm2 each, current_density=100 mA cm-2 | Ausgeschlossen: nicht kanonisiert (kein kanonischer Slug) |
| Share of alcohols among the electrolysis products, experiment B | 52,8 | % | 90 % | gc-ms | "when FE = 1.0, alcohols were the dominant products accounting for 52.8%, while e…" · ph=7, cell=80 mL heart-shaped borosilicate glass reactor, 60 mL solution, time=333 mins, acids=["butyric acid","valeric acid","caproic acid"] | Ausgeschlossen: nicht kanonisiert (kein kanonischer Slug) |
| Share of ketones among the electrolysis products, experiment A | 7 | % | 90 % | gc-ms | "Esters and alkanes accounted for 11.7 and 3.3%, respectively, moreover, a notabl…" · ph=7, cell=100 mL glass bottle reactor, 80 mL solution, time=83 mins, acids=["butyric acid","valeric acid","caproic acid"] | Ausgeschlossen: nicht kanonisiert (kein kanonischer Slug) |
| Yield of Kolbe dimers (alkanes), experiment B | 3,4 | % | 90 % | gc-ms | "Kolbe dimers were formed with yields of only 3.3% and 3.4% for FE = 0.25 and FE …" · ph=7, cell=80 mL heart-shaped borosilicate glass reactor, 60 mL solution, time=333 mins, acids=["butyric acid","valeric acid","caproic acid"] | Ausgeschlossen: nicht kanonisiert (kein kanonischer Slug) |
| Yield of nonane (valeric/caproic acid heterodimer), experiment A | 0,64 | % | 90 % | gc-ms | "octane, nonane and decane could be obtained with yields of 1.67, 0.64 and 1.06% …" · ph=7, cell=100 mL glass bottle reactor, 80 mL solution, time=83 mins, acids=["butyric acid","valeric acid","caproic acid"] | Ausgeschlossen: nicht kanonisiert (kein kanonischer Slug) |
| Yield of octane (valeric acid homodimer), experiment A | 1,67 | % | 90 % | gc-ms | "octane, nonane and decane could be obtained with yields of 1.67, 0.64 and 1.06% …" · ph=7, cell=100 mL glass bottle reactor, 80 mL solution, time=83 mins, acids=["butyric acid","valeric acid","caproic acid"] | Ausgeschlossen: nicht kanonisiert (kein kanonischer Slug) |
| Yield of Kolbe dimers (alkanes), experiment A | 3,3 | % | 90 % | gc-ms | "Kolbe dimers were formed with yields of only 3.3% and 3.4% for FE = 0.25 and FE …" · ph=7, cell=100 mL glass bottle reactor, 80 mL solution, time=83 mins, acids=["butyric acid","valeric acid","caproic acid"] | Ausgeschlossen: nicht kanonisiert (kein kanonischer Slug) |
| Share of esters among the electrolysis products, experiment B | 18 | % | 90 % | gc-ms | "when FE = 1.0, alcohols were the dominant products accounting for 52.8%, while e…" · ph=7, cell=80 mL heart-shaped borosilicate glass reactor, 60 mL solution, time=333 mins, acids=["butyric acid","valeric acid","caproic acid"] | Ausgeschlossen: nicht kanonisiert (kein kanonischer Slug) |
| Share of ketones among the electrolysis products, experiment B | 17,8 | % | 90 % | gc-ms | "when FE = 1.0, alcohols were the dominant products accounting for 52.8%, while e…" · ph=7, cell=80 mL heart-shaped borosilicate glass reactor, 60 mL solution, time=333 mins, acids=["butyric acid","valeric acid","caproic acid"] | Ausgeschlossen: nicht kanonisiert (kein kanonischer Slug) |
| Yield of octane (valeric acid homodimer), experiment B | 1,64 | % | 90 % | gc-ms | "octane, nonane and decane could be obtained with yields of 1.67, 0.64 and 1.06% …" · ph=7, cell=80 mL heart-shaped borosilicate glass reactor, 60 mL solution, time=333 mins, acids=["butyric acid","valeric acid","caproic acid"] | Ausgeschlossen: nicht kanonisiert (kein kanonischer Slug) |
Extraktionspipeline
Rohextraktionen, Artefakte, Qualitätssignal
Extraktionsqualität
EhrlichkeitssignalBemessen Sie Ihr Vertrauen in die extrahierten Inhalte an diesen Signalen – so hat die Pipeline ihre eigene Ausgabe für diese Publikation bewertet.
Mittlere Parameterkonfidenz
89 %
Durchschnittliche Konfidenz der oben angezeigten PaperParameter-Zeilen
vor dem Zitieren mit dem Quell-PDF abgleichen · Werte 0–1
Diagramm-Explorer
Verändern Sie die Eingaben dieser Publikation und sehen Sie, wie sich das vorhergesagte Ergebnis verschiebt.
Modell erkunden
Der Reaktor in 3D, mit Strömung, die sich ein- und ausschalten lässt.
KI-Erkenntnisse
Widersprüche, Lücken und Chancen aus dem Vergleich dieser Publikation mit dem Korpus.
Ähnliche Publikationen vergleichen
Die nächsten Publikationen nach System, Materialien und Organismen, mit ihren Ergebnissen nebeneinander.
Quell-PDF
Die Publikation, wie sie erschienen ist.
Dieser Publikation ist noch kein 3D-Modell zugeordnet. Die daraus extrahierten Werte stehen unter „Extrahierte Werte“.
Schlagwörter
- volatile fatty acids
- electrodialysis
- butyrate
- Kolbe electrolysis
- Faradaic efficiency
- alcohol formation
- carboxylic acids
- ketone formation
Zitieren
Tamás Rózsenberszki, Katalin Kucsera, Boglárka Bocska et al. (2025). Upgrading Potential of Waste Fermentation-Based C4-C5-C6 Carboxylic Acid Mixtures using Electrochemical Oxidative Decarboxylation. Hungarian Journal of Industry and Chemistry. https://doi.org/10.33927/hjic-2025-14
- Zeitschrift
- Hungarian Journal of Industry and Chemistry