Forschungsdaten – Titel und Zusammenfassungen von Publikationen, extrahierte Daten und Katalogeinträge – erscheinen in ihrer Originalsprache Englisch.
Publikation · MSC
Photo-Fermentative Bacteria Used for Hydrogen Production
Zusammenfassung
Was die Publikation berichtet, in ihren eigenen Worten.
Zusammenfassung
Photo-fermentation is an efficient hydrogen production pathway in which purple non-sulfur bacteria (PNSB) play an active role and produce hydrogen as a part of their metabolism under optimal conditions. These bacteria work under the influence of light to advance their metabolism and use various substrates, such as simple sugars and volatile fatty acids, to produce hydrogen. This article presents a comparative review of several bacterial strains that have been efficiently used to produce hydrogen by photo-fermentation under different optimized conditions, including the substrate, its concentration, type and capacity of the bioreactor, light sources and intensities, and process conditions to achieve the maximum biohydrogen production rate. The analysis showed that the Rhodopseudomonas palustris is the main bacterium used for hydrogen production, with a maximum hydrogen production rate of 3.2 mM/h using 27.8 mM of glucose in a 165 mL serum bottle and 3.23 mM/h using 50 mM of glycerol at pH 7, followed by Rhodobacter sphaeroides, which gave a hydrogen production rate as high as 8.7 mM/h, using 40 mM of lactic acid, pH 7, and 30 °C temperature in a single-walled glass bioreactor. However, it is not preferred over R. palustris due to its versatile metabolism and ability to use an alternative mode if the conditions are not carefully adjusted, which can be a problem in hydrogen production.
Extrahierte Werte
Jeder aus der Publikation entnommene Wert mit seiner Quelle, damit sich jede Zahl am Text prüfen lässt.
n = 126 extrahierte Werte
Wählen Sie eine Quellenangabe, um Zitat, Seite und Konfidenz hinter einem Wert zu sehen.
8 von 126 extrahierten Zeilen modellierbar
- 118 kein SI-Wert
| Parameter | Wert | Einheit | Konfidenz | Quelle | Anmerkungen | Modellierbar |
|---|---|---|---|---|---|---|
| Specific H₂ Production×2 | 0,25 | mM/h | 85 % | extrahiert | "CGA009, Glycerol (10), pH 7.0, 35 ◦C, 250 mL glass bottles (200 mL working volum…" · T=35°C, pH(an)=7, substrate=glycerol, steady_state | Ausgeschlossen: kein SI-Wert |
| Specific H₂ Production×2 | 3,23 | mM/h | 85 % | extrahiert | "NCIMB 11774, Glycerol (50), pH 7.0, 28 ± 1 ◦C, Fluidized bed PBR (1 L), Tungsten…" · T=28°C, pH(an)=7, substrate=glycerol, steady_state | Ausgeschlossen: kein SI-Wert |
| Specific H₂ Production×2 | 0,82 | mM/h | 85 % | extrahiert | "CQK 01, Glucose (50), pH 7.0, 30 ◦C, PBR 120 × 60 × 190 mm3, Monochromatic LED, …" · T=30°C, pH(an)=7, substrate=glucose, steady_state | Ausgeschlossen: kein SI-Wert |
| Specific H₂ Production×2 | 0,54 | mM/h | 85 % | extrahiert | "CQK 01, Glucose (50), pH 7.0, 30 ◦C, PBR of PMMA 100 × 50 × 100 mm3, Monochromat…" · T=30°C, pH(an)=7, substrate=glucose, steady_state | Ausgeschlossen: kein SI-Wert |
| Specific H₂ Production×2 | 2,6 | mM/h | 85 % | extrahiert | "JP91, Glucose (35), pH 6.8, 30 ◦C, 100 mL serum bottles, batch, Tungsten lamp, 1…" · T=30°C, pH(an)=6.8, substrate=glucose, steady_state | Ausgeschlossen: kein SI-Wert |
| Specific H₂ Production×2 | 0,73 | mM/h | 85 % | extrahiert | "YO3, Sucrose (5 indoors, 10 outdoors), pH 7.5, 30 ◦C, 3.64 L PBR of two PMMA wit…" · T=30°C, pH(an)=7.5, substrate=sucrose, steady_state | Ausgeschlossen: kein SI-Wert |
| Specific H₂ Production×2 | 1,6 | mM/h | 85 % | extrahiert | "JP91, Glucose (56), pH 6.8, 30 ◦C, 350 mL, continuous, Tungsten lamp, 1.6–2.3" · T=30°C, pH(an)=6.8, substrate=glucose, steady_state | Ausgeschlossen: kein SI-Wert |
| Specific H₂ Production×2 | 0,89 | mM/h | 85 % | extrahiert | "O.U.001, Acetic (4) + butyric acid (6), pH 7.0, 32 ◦C, Batch mode and fed-batch,…" · T=32°C, pH(an)=7, substrate=acetic acid, butyric acid mixture, steady_state | Ausgeschlossen: kein SI-Wert |
| Specific H₂ Production×2 | 0,75 | mM/h | 85 % | extrahiert | "DSM 1710, YO3, Acetate (60), pH 6.7, 30–32 ◦C, 1.4 L PMMA reactor, batch, Tungst…" · T=31°C, pH(an)=6.7, substrate=acetate, steady_state | Ausgeschlossen: kein SI-Wert |
| Specific H₂ Production×2 | 2,3 | mM/h | 85 % | extrahiert | "JP91, Glucose (56), pH 6.8, 30 ◦C, 350 mL, continuous, Tungsten lamp, 1.6–2.3" · T=30°C, pH(an)=6.8, substrate=glucose, steady_state | Ausgeschlossen: kein SI-Wert |
| Specific H₂ Production×2 | 0,87 | mM/h | 85 % | extrahiert | "YO3, Sucrose (5 indoors, 10 outdoors), pH 7.5, 30 ◦C, 3.64 L PBR of two PMMA wit…" · T=30°C, pH(an)=7.5, substrate=sucrose, steady_state | Ausgeschlossen: kein SI-Wert |
| Specific H₂ Production×2 | 0,566 | mM/h | 85 % | extrahiert | "DSM 1710, Lactic acid (7.5), pH 6.4, 27.5 ◦C, 55 mL glass bottle, Tungsten lamp,…" · T=27.5°C, pH(an)=6.4, substrate=lactic acid, steady_state | Ausgeschlossen: kein SI-Wert |
| Specific H₂ Production×2 | 0,65 | mM/h | 85 % | extrahiert | "Individually and mixture: acetate (32) + propionate (5) + butyrate (10), pH 6.8,…" · T=32°C, pH(an)=6.8, substrate=acetate, propionate, butyrate mixture, steady_state | Ausgeschlossen: kein SI-Wert |
| Specific H₂ Production×2 | 0,26 | mM/h | 85 % | extrahiert | "Individually and mixture: acetate (32) + propionate (5) + butyrate (10), pH 6.8,…" · T=32°C, pH(an)=6.8, substrate=butyrate, steady_state | Ausgeschlossen: kein SI-Wert |
| Specific H₂ Production×2 | 0,56 | mM/h | 85 % | extrahiert | "Acetate (30) + propionate (3) + butyrate (12), pH 6.8, 35 ◦C, 1500 mL, continuou…" · T=35°C, pH(an)=6.8, substrate=acetate, propionate, butyrate mixture, steady_state | Ausgeschlossen: kein SI-Wert |
| Specific H₂ Production×2 | 0,76 | mM/h | 85 % | extrahiert | "WP3–5, Acetate (14.8), pH 7.1, 32 ◦C, Sealed glass vessel (500 mL), Tungsten/hal…" · T=32°C, pH(an)=7.1, substrate=acetate, steady_state | Ausgeschlossen: kein SI-Wert |
| Specific H₂ Production×2 | 1,2 | mM/h | 85 % | extrahiert | "O.U.001, L-malic acid (15), pH 7.0–7.2, 28 ◦C, 25 mL sodium glass vials, Mercury…" · T=28°C, pH(an)=7.1, substrate=L-malic acid, steady_state | Ausgeschlossen: kein SI-Wert |
| Specific H₂ Production×2 | 7 | mM/h | 85 % | extrahiert | "HY01, Acetate (25) + butyrate (34), pH 7.0–8.2, 30 ◦C, 30 mL syringes, batch, Tu…" · T=30°C, pH(an)=7.6, substrate=acetate, butyrate mixture, steady_state | Ausgeschlossen: kein SI-Wert |
| Specific H₂ Production×2 | 0,29 | mM/h | 85 % | extrahiert | "O.U.001, DL malic acid (15), pH 6.8, 33 ◦C, Triple-jacketed vertical glass PBR (…" · T=33°C, pH(an)=6.8, substrate=DL malic acid, steady_state | Ausgeschlossen: kein SI-Wert |
| Specific H₂ Production×2 | 8,7 | mM/h | 85 % | extrahiert | "DSM 158, Lactic acid (40), pH 7.0, 30 ◦C, Single-walled glass vessel, batch, Hal…" · T=30°C, pH(an)=7, substrate=lactic acid, steady_state | Ausgeschlossen: kein SI-Wert |
| Specific H₂ Production×2 | 7,4 | mM/h | 85 % | extrahiert | "DSM 158, Lactic acid (40), pH 7.0, 30 ◦C, 20 L feed tank, continuous, Halogen la…" · T=30°C, pH(an)=7, substrate=lactic acid, steady_state | Ausgeschlossen: kein SI-Wert |
| Specific H₂ Production×2 | 0,26 | mM/h | 85 % | extrahiert | "Wild type B10, Lactate (35), pH 6.9, 30 ◦C, 350 mL cylindrical glass vessel, Na …" · T=30°C, pH(an)=6.9, substrate=lactate, steady_state | Ausgeschlossen: kein SI-Wert |
| Specific H₂ Production×2 | 0,46 | mM/h | 85 % | extrahiert | "Wild type B10, Lactate (35), pH 6.9, 30 ◦C, 350 mL cylindrical glass vessel, Na …" · T=30°C, pH(an)=6.9, substrate=lactate, steady_state | Ausgeschlossen: kein SI-Wert |
| Specific H₂ Production×2 | 1,3 | mM/h | 85 % | extrahiert | "DSM 1710, YO3, Acetate (60), pH 6.7, 30–32 ◦C, 1.4 L PMMA reactor, batch, Tungst…" · T=31°C, pH(an)=6.7, substrate=acetate, steady_state | Ausgeschlossen: kein SI-Wert |
| Specific H₂ Production×2 | 0,31 | mM/h | 85 % | extrahiert | "Acetate (30) + propionate (3) + butyrate (11), pH 7.0, 31 ◦C, 300 mL glass PBR, …" · T=31°C, pH(an)=7, substrate=acetate, propionate, butyrate mixture, steady_state | Ausgeschlossen: kein SI-Wert |
Methodik
Welches System und wie es betrieben wurde
Betriebsbedingungen
48 Läufe extrahiert| Lauf | T°C | pHAnolyt | pHKatholyt | Substrat | [S]mg/L | HRTh | Modus | R_extΩ | V_appV | Inokulum |
|---|---|---|---|---|---|---|---|---|---|---|
| v2-08138e5cc62b5eb7 | 30 | 7 | — | glucose | 5000 | — | steady_state | — | — | — |
| v2-099852630ab4edfc | 30 | 7 | — | glucose | 4470 | — | steady_state | — | — | — |
| v2-0efd78cafd0cdfa7 | 30 | 7.5 | — | acetate | — | — | steady_state | — | — | — |
| v2-0fe195f5ec49caa1 | 30 | 7 | — | lactic acid | 4000 | — | steady_state | — | — | — |
| v2-15058f727043ec2f | 32 | 6.8 | — | propionate | 500 | — | steady_state | — | — | — |
| v2-191bd77212f2c31f | 29 | 7 | — | glucose | 5500 | — | steady_state | — | — | — |
| v2-22191dbf6802d49d | 33 | 6.8 | — | DL malic acid | 1500 | — | steady_state | — | — | — |
| v2-23bcef090dbc00d3 | 35 | 6.9 | — | glucose | 4000 | — | steady_state | — | — | — |
| v2-249ba047963e4ff0 | 35 | 7 | — | glycerol | 1000 | — | steady_state | — | — | — |
| v2-2c9776565cf2fa25 | 30 | 7 | — | benzoate | 500 | — | steady_state | — | — | — |
| v2-3024776f2fafacfa | — | — | — | acetate | 2000 | — | steady_state | — | — | — |
| v2-3aa9ff9e2ec4e57c | — | — | — | — | — | — | steady_state | — | — | — |
| v2-3e25a544a2fc1d74 | 30 | 7.6 | — | acetate, butyrate mixture | 5900 | — | steady_state | — | — | — |
| v2-49870901584c78c6 | 25 | — | — | glycerol | 1000 | — | steady_state | — | — | — |
| v2-56c9d3d632c562ed | 30 | 7 | — | glucose | 5600 | — | steady_state | — | — | — |
| v2-5afe1129f0c7c419 | — | — | — | acetate | — | — | steady_state | — | — | — |
| v2-6369dfb8e1d42448 | 30 | 7.5 | — | sucrose | 1000 | — | steady_state | — | — | — |
| v2-66d007d83a38fc06 | 30 | 6.9 | — | lactate | 3500 | — | steady_state | — | — | — |
| v2-718725155133ce6c | 32 | 6.8 | — | acetate, propionate, butyrate mixture | 4700 | — | steady_state | — | — | — |
| v2-72f4e0cfa61f2285 | — | — | — | lignocellulose | — | — | — | — | — | — |
| v2-78bb356228667a5a | 32 | 6.8 | — | butyrate | 1000 | — | steady_state | — | — | — |
| v2-800a62827f798f4c | 31 | 7 | — | acetate, propionate, butyrate mixture | 4400 | — | steady_state | — | — | — |
| v2-8416e988a179e7de | 30 | — | — | acetate and butyrate | — | — | steady_state | — | — | — |
| v2-85f7cb3a9c3e1c72 | 33 | 6.8 | — | malate | 2000 | — | steady_state | — | — | — |
| v2-8d2f12cc27bc1186 | 30 | 7 | — | palm oil mill effluent | — | — | steady_state | — | — | — |
| v2-8ef64db31297859f | 31 | 6.7 | — | acetate | 6000 | — | steady_state | — | — | — |
| v2-905152ca4b774e20 | 40 | 7 | — | glucose | 9900 | — | steady_state | — | — | — |
| v2-95b421941a10eb94 | 31 | 6.9 | — | L-malic acid | 3000 | — | steady_state | — | — | — |
| v2-95e32a38e076c8ed | 28 | 7.1 | — | L-malic acid | 1500 | — | steady_state | — | — | — |
| v2-9939b5514d1f6f22 | 32 | 7 | — | acetic acid, butyric acid mixture | 1000 | — | steady_state | — | — | — |
| v2-9c7696ac00891bde | 30 | 7.2 | — | brewery effluent | — | — | steady_state | — | — | — |
| v2-a25f579ac5994e2e | 30 | 6.8 | — | glucose | 3500 | — | steady_state | — | — | — |
| v2-a3509493136d9969 | — | — | — | acetic acid | 4000 | — | steady_state | — | — | — |
| v2-a6196a1a3e8a63a3 | 35 | 7 | — | acetate | 6800 | — | steady_state | — | — | — |
| v2-a9d9e4ecc670d60f | 25 | 7 | — | glucose | 5600 | — | steady_state | — | — | — |
| v2-aa163671871df455 | 27.5 | 6.4 | — | lactic acid | 750 | — | steady_state | — | — | — |
| v2-acd26476f6d7bf8b | 28 | 7 | — | glycerol | 5000 | — | steady_state | — | — | — |
| v2-ae8af4dd15bec6db | 35 | 6.8 | — | acetate, propionate, butyrate mixture | 4500 | — | steady_state | — | — | — |
| v2-b2716b1b1a2afc64 | 28 | 7.1 | — | L-malic acid, wastewater mixture | — | — | steady_state | — | — | — |
| v2-b818f1a6586d4d9e | 32 | 6.8 | — | acetate | 3200 | — | steady_state | — | — | — |
| v2-bb5345fab1301025 | 30 | 6.8 | — | glucose | 5600 | — | steady_state | — | — | — |
| v2-bc093413e02adfd5 | 30 | 7.5 | — | sucrose | 500 | — | steady_state | — | — | — |
| v2-bc9477da15572502 | 35 | 7 | — | oil palm, glucose, xylose, acetic acid mixture | — | — | steady_state | — | — | — |
| v2-bd98e4565613f1d8 | 32 | 7.1 | — | acetate | 1480 | — | steady_state | — | — | — |
| v2-c34c8f4f9599127f | 30 | 7 | — | glucose | 2780 | — | steady_state | — | — | — |
| v2-c5da968b3f79fde4 | 30 | 7 | — | glucose | 9900 | — | steady_state | — | — | — |
| v2-d881dd0d58b94d16 | 30 | 7.25 | — | DL malic acid | 750 | — | steady_state | — | — | — |
| v2-e5b405641b8de276 | 30 | 7.5 | — | lactate | 5000 | — | steady_state | — | — | — |
Extraktionspipeline
Rohextraktionen, Artefakte, Qualitätssignal
Extraktionsqualität
EhrlichkeitssignalBemessen Sie Ihr Vertrauen in die extrahierten Inhalte an diesen Signalen – so hat die Pipeline ihre eigene Ausgabe für diese Publikation bewertet.
KI-Konfidenz
60 %
Vom Modell selbst angegebene Konfidenz
Mittlere Parameterkonfidenz
80 %
Durchschnittliche Konfidenz der oben angezeigten PaperParameter-Zeilen
vor dem Zitieren mit dem Quell-PDF abgleichen · Werte 0–1
Diagramm-Explorer
Verändern Sie die Eingaben dieser Publikation und sehen Sie, wie sich das vorhergesagte Ergebnis verschiebt.
Modell erkunden
Der Reaktor in 3D, mit Strömung, die sich ein- und ausschalten lässt.
KI-Erkenntnisse
Widersprüche, Lücken und Chancen aus dem Vergleich dieser Publikation mit dem Korpus.
Ähnliche Publikationen vergleichen
Die nächsten Publikationen nach System, Materialien und Organismen, mit ihren Ergebnissen nebeneinander.
Quell-PDF
Die Publikation, wie sie erschienen ist.
Dieser Publikation ist noch kein 3D-Modell zugeordnet. Die daraus extrahierten Werte stehen unter „Extrahierte Werte“.
In diesem Datensatz
Organismen, Parameter und Materialien, die diese Publikation berichtet. Jeder Eintrag verweist auf seine Seite.
Organismen · 1
Schlagwörter
- Fermentative hydrogen production
- Hydrogen production
- Bacteria
- Biochemical engineering
Zitieren
S. R. Sen Gupta, Annabel Fernandes, Ana Lopes et al. (2024). Photo-Fermentative Bacteria Used for Hydrogen Production. Applied Sciences. https://doi.org/10.3390/app14031191
- Zeitschrift
- Applied Sciences