Forschungsdaten – Titel und Zusammenfassungen von Publikationen, extrahierte Daten und Katalogeinträge – erscheinen in ihrer Originalsprache Englisch.

Forschung

Publikation

Methane production in microbial reverse-electrodialysis methanogenesis cells (MRMCs) using thermolytic solutions.

01

Zusammenfassung

Was die Publikation berichtet, in ihren eigenen Worten.

KI-angereichert· 100 %

Zusammenfassung

The utilization of bioelectrochemical systems for methane production has attracted increasing attention, but producing methane in these systems requires additional voltage to overcome large cathode overpotentials. To eliminate the need for electrical grid energy, we constructed a microbial reverse-electrodialysis methanogenesis cell (MRMC) by placing a reverse electrodialysis (RED) stack between an anode with exoelectrogenic microorganisms and a methanogenic biocathode. In the MRMC, renewable salinity gradient energy was converted to electrical energy, thus providing the added potential needed for methane evolution from the cathode. The feasibility of the MRMC was examined using three different cathode materials (stainless steel mesh coated with platinum, SS/Pt; carbon cloth coated with carbon black, CC/CB; or a plain graphite fiber brush, GFB) and a thermolytic solution (ammonium bicarbonate) in the RED stack. A maximum methane yield of 0.60 ± 0.01 mol-CH4/mol-acetate was obtained using the SS/Pt biocathode, with a Coulombic recovery of 75 ± 2% and energy efficiency of 7.0 ± 0.3%. The CC/CB biocathode MRMC had a lower methane yield of 0.55 ± 0.02 mol-CH4/mol-acetate, which was twice that of the GFB biocathode MRMC. COD removals (89-91%) and Coulombic efficiencies (74-81%) were similar for all cathode materials. Linear sweep voltammetry and electrochemical impedance spectroscopy tests demonstrated that cathodic microorganisms enhanced electron transfer from the cathode compared to abiotic controls. These results show that the MRMC has significant potential for production of nearly pure methane using low-grade waste heat and a source of waste organic matter at the anode.

KI-Zusammenfassung

100 % Konfidenz

International BES research in renewable-energy with focus on renewable-integration, iot-smart-systems, humanitarian. The utilization of bioelectrochemical systems for methane production has attracted increasing attention, but producing m...

Erstellt von der MESSAI-Extraktionspipeline · mit dem Quell-PDF abgleichen

02

Extrahierte Werte

Jeder aus der Publikation entnommene Wert mit seiner Quelle, damit sich jede Zahl am Text prüfen lässt.

n = 6 extrahierte Werte

Wählen Sie eine Quellenangabe, um Zitat, Seite und Konfidenz hinter einem Wert zu sehen.

0 von 5 extrahierten Zeilen modellierbar

  • 1 nicht kanonisiert (kein kanonischer Slug)
  • 4 kein SI-Wert
ParameterWertEinheitKonfidenzQuelleModellierbar
Substrateacetate—80 %
llm
Cathode materialbiocathode—60 %
extrahiert
Ausgeschlossen: kein SI-Wert
Electrode materialcarbon cloth—50 %
extrahiert
Ausgeschlossen: nicht kanonisiert (kein kanonischer Slug)
Membrane materialreverse electrodialysis (RED) stack with thermolytic solution (ammonium bicarbonate)—50 %
extrahiert
Ausgeschlossen: kein SI-Wert
Coulombic efficiency75%50 %
extrahiert
Ausgeschlossen: kein SI-Wert
Cathode materialstainless steel mesh coated with platinum (SS/Pt), carbon cloth coated with carbon black (CC/CB), graphite fiber brush (GFB)—50 %
extrahiert
Ausgeschlossen: kein SI-Wert

Methodik

Welches System und wie es betrieben wurde

Methodik

Methodology

The authors constructed a microbial reverse-electrodialysis methanogenesis cell (MRMC) by placing a reverse electrodialysis (RED) stack between an anode with exoelectrogenic microorganisms and a methanogenic biocathode.

Elektrodenspezifikationen

FeldWert
materials["carbon cloth","graphite","stainless steel","platinum"]

Leistungskennzahlen

FeldWert
citation count89

Betriebsparameter

FeldWert
substrate["acetate"]

Extraktionspipeline

Rohextraktionen, Artefakte, Qualitätssignal

Extraktionsqualität

Ehrlichkeitssignal

Bemessen Sie Ihr Vertrauen in die extrahierten Inhalte an diesen Signalen – so hat die Pipeline ihre eigene Ausgabe für diese Publikation bewertet.

Parametervollständigkeit

50 %

Anteil der erwarteten Parameter, die extrahiert wurden

Datenvollständigkeit

60 %

Gesamtabdeckung der Extraktion über alle Felder

KI-Konfidenz

100 %

Vom Modell selbst angegebene Konfidenz

Mittlere Parameterkonfidenz

57 %

Durchschnittliche Konfidenz der oben angezeigten PaperParameter-Zeilen

vor dem Zitieren mit dem Quell-PDF abgleichen · Werte 0–1

03

Diagramm-Explorer

Verändern Sie die Eingaben dieser Publikation und sehen Sie, wie sich das vorhergesagte Ergebnis verschiebt.

04

Modell erkunden

Der Reaktor in 3D, mit Strömung, die sich ein- und ausschalten lässt.

05

KI-Erkenntnisse

Widersprüche, Lücken und Chancen aus dem Vergleich dieser Publikation mit dem Korpus.

06

Ähnliche Publikationen vergleichen

Die nächsten Publikationen nach System, Materialien und Organismen, mit ihren Ergebnissen nebeneinander.

Dieser Publikation ist noch kein 3D-Modell zugeordnet. Die daraus extrahierten Werte stehen unter „Extrahierte Werte“.

75,0Prozent
Bestes Ergebnis · Coulomb-Effizienz
6
Extrahierte Werte
2014
Jahr

Schlagwörter

  • Reversed electrodialysis
  • Methane
  • Faraday efficiency
  • Microbial fuel cell
  • Methanogenesis
  • Microbial electrolysis cell

Zitieren

Xi Luo, Fang Zhang, Jia Liu et al. (2014). Methane production in microbial reverse-electrodialysis methanogenesis cells (MRMCs) using thermolytic solutions. Environmental Science & Technology. https://doi.org/10.1021/es501979z