Forschungsdaten – Titel und Zusammenfassungen von Publikationen, extrahierte Daten und Katalogeinträge – erscheinen in ihrer Originalsprache Englisch.
Publikation · MFC
Microbial fuel cells in electricity generation with waste treatment: Alternative electron acceptors
Zusammenfassung
Was die Publikation berichtet, in ihren eigenen Worten.
Zusammenfassung
Microbial fuel cell (MFC) have attracted great interest in recent years as a technology that uses microorganisms to oxidize organic and inorganic materials at the anode for the purpose of bioelectricity generation and bioremediation. In MFC systems, energy can be obtained by using all kinds of organic matter as substrate, from simple molecules (acetate, carbohydrates, glucose etc.) to complex compounds (molasses, cellulose, wastewater, waste sludge, domestic agricultural and animal wastes etc.). In addition to wastewater treatment, MFC technology has additional benefits such as sulfate removal, heavy metal removal, denitrification and nitrification. However, the low power efficiencies and potential losses of these systems limit their applicability on a real scale. Although the anode chamber of MFC systems has been studied in detail over many different parameters, the cathodic electron acceptors have been studied relatively less. In MFC systems, electron acceptors are one of the main parameters influencing power generation as they contribute to overcoming potential losses at the cathode. Oxygen has a relatively high redox potential and is the traditional electron acceptor used in MFC systems as it is reduced to form a clean product like water. However, the need for alternative electron acceptors has increased due to the fact that feeding oxygen to the cathode chamber requires additional energy and the need for catalysts due to the slow O 2 reduction rate. Electricity generation by reducing certain electron acceptors at the cathode chamber has promising potential for bioenergy production, and the use of pollutants such as nitrogen species, heavy metals and perchlorate as electron acceptors reduces the cost for their specific treatment. This review aims to summarize the various electron acceptors used in MFC systems, compare their effects on MFC performance, and discuss possible future areas.
KI-Zusammenfassung
72 % KonfidenzThis review examines electron acceptors in microbial fuel cells (MFCs) for simultaneous wastewater treatment and bioelectricity generation. The paper surveys oxygen, ferricyanide, permanganate, and other alternative electron acceptors, comparing their effects on power generation and treatment performance. While oxygen is sustainable and non-toxic, its slow reduction kinetics require expensive catalysts. Ferricyanide and permanganate show higher power outputs but face practical limitations. The review emphasizes that cathode electron acceptor selection critically affects MFC performance, yet research on cathode optimization remains limited compared to anode studies.
Zentrale Erkenntnisse
Zielkonflikt Ferricyanide increases power output 1.5–1.8 times compared to oxygen in two-chamber MFCs, and produces 0.833 V versus 0.589 V with oxygen in continuous systems.
Was heißt das. If power density is the priority and toxicity/regeneration is manageable in a closed loop, ferricyanide is a viable short-term alternative; however, oxygen remains necessary for field deployment.
Mechanismus Oxygen reduction kinetics are inherently slow, causing high overpotential that limits cell voltage to below 1.0 V in most systems, whereas ferricyanide achieves 0.833 V with faster kinetics.
Was heißt das. Operators must either accept lower voltage/power with oxygen or invest in expensive Pt catalysts; ferricyanide avoids this but introduces regeneration and toxicity costs.
Zielkonflikt Permanganate outperforms ferricyanide for power generation and requires no catalyst, but like most electron acceptors it becomes depleted during operation.
Was heißt das. Permanganate is attractive for catalyst-free operation but requires continuous or periodic replenishment, adding operational complexity and cost.
Mechanismus Cathode electron acceptor efficiency is a primary limiting factor in MFC power generation, yet cathode research is significantly less developed than anode research.
Was heißt das. Future MFC optimization should prioritize cathode design and acceptor selection; this is a high-leverage area with fewer competing solutions.
Ansatzpunkte6
Konkrete Lücken in dieser Publikation, jeweils mit einem Experiment, das sie schließen würde.
Hoch No explicit study of cathode potential (Ecathode) or anode potential (Eanode) windows for nitrogen species reduction (NO3⁻, NO2⁻, N2O) in MFC systems.
The paper lists 'denitrification and nitrification' as MFC benefits in the abstract but provides no mechanistic detail, operating potentials, or kinetic data for nitrogen cycling. The ferricyanide study by Zain et al. reports 9% nitrogen removal but no speciation or potential control.
Versuch. Vary cathode potential from −0.2 to +0.6 V (vs. SHE) in a dual-chamber MFC with NO3⁻ feed (100–500 mg-N/L); measure NO3⁻, NO2⁻, NH4⁺, N2O, and N2 at each potential; identify threshold for denitrification vs. nitrification.
Hoch No data on N2O accumulation or selectivity as a function of cathode potential, current density, or HRT in nitrogen-reducing MFCs.
The paper mentions nitrogen removal but does not address N2O as a byproduct or environmental concern. This is critical for bioelectrochemical denitrification, where N2O is a common intermediate.
Versuch. Operate MFC with NO3⁻ feed at fixed cathode potentials (−0.1, −0.3, −0.5 V vs. SHE) and varying current densities (0.5–5 A/m²); measure N2O, N2, NO2⁻, and NO3⁻ in outlet gas and liquid; determine N2O selectivity vs. current density.
Hoch No systematic comparison of electron acceptor performance (power, kinetics, selectivity) across a range of cathode potentials or current densities.
The paper compares oxygen, ferricyanide, and permanganate in terms of power output and voltage, but does not control or report cathode potential, current density, or HRT. This makes it impossible to predict performance in a new system or optimize for a specific goal (power vs. treatment).
Versuch. Operate three parallel MFCs (oxygen, ferricyanide, permanganate) at fixed current densities (0.5, 1, 2, 5 A/m²) and measure cathode potential, power density, and treatment efficiency (COD, nitrogen, sulfur) at each; plot Ecathode vs. current density and performance.
Mittel No investigation of catholyte pH effects on nitrogen species reduction or on electron acceptor kinetics.
The paper notes that pH affects proton transfer and microbial activity in the anode, but does not discuss how catholyte pH (which typically rises during operation) affects cathode kinetics or nitrogen speciation. This is important for denitrification, which is pH-sensitive.
Versuch. Operate MFC with NO3⁻ feed at controlled catholyte pH (6, 7, 8, 9) and measure NO3⁻ reduction rate, N2O selectivity, and cathode potential; identify optimal pH window for complete denitrification (N2 production).
Mittel No data on C/N ratio effects on simultaneous carbon oxidation and nitrogen reduction in MFC systems.
The paper discusses substrate type and COD removal but does not address how C/N ratio affects the balance between anode oxidation and cathode reduction, or whether nitrogen removal is limited by carbon availability or electron transfer.
Versuch. Feed MFC with acetate + NO3⁻ at C/N ratios of 2, 5, 10, 20 (by molar carbon:nitrogen); measure COD removal, nitrogen removal, power density, and cathode potential; identify limiting C/N ratio for complete denitrification.
Mittel No comparison of biocathode (microbial catalysis) versus chemical cathodes for nitrogen reduction or alternative electron acceptors.
The paper mentions biocathodes as a cost-saving concept for oxygen reduction but does not explore their use for nitrogen species reduction, which could be catalyzed by denitrifying biofilms and eliminate the need for chemical acceptors.
Versuch. Inoculate cathode with denitrifying consortium; operate at −0.3 V vs. SHE with NO3⁻ feed; compare power density, nitrogen removal rate, and N2O selectivity to chemical cathodes (ferricyanide, permanganate) at the same potential and current density.
Erstellt von der MESSAI-Extraktionspipeline · mit dem Quell-PDF abgleichen
Extrahierte Werte
Jeder aus der Publikation entnommene Wert mit seiner Quelle, damit sich jede Zahl am Text prüfen lässt.
n = 92 extrahierte Werte
Wählen Sie eine Quellenangabe, um Zitat, Seite und Konfidenz hinter einem Wert zu sehen.
68 von 91 extrahierten Zeilen modellierbar
- 4 nicht kanonisiert (kein kanonischer Slug)
- 15 kein SI-Wert
- 3 außerhalb physikalischer Grenzen
- 1 widerspricht anderen Publikationen
| Parameter | Wert | Einheit | Konfidenz | Quelle | Anmerkungen | Modellierbar |
|---|---|---|---|---|---|---|
| Substrate | glucose,acetate,wastewater,cellulose | — | 80 % | llm | ||
| Open Circuit Voltage | 1,1 | V | 80 % | extrahiert | "Persülfate, Anaerobic inoculum+Synthetic media, 1.10, 101.7 mW/m2, [33]" · substrate=Synthetic media | Modellierbar |
| Open Circuit Voltage | 0,833 | V | 80 % | extrahiert | "Ferricyanide, Domestic wastewater+ Synthetic media, 0.833, -, [61]" · substrate=Domestic wastewater and Synthetic media | Modellierbar |
| Open Circuit Voltage | 4,5Außerhalb des physikalischen Bereichs, Quelle prüfen | V | 80 % | extrahiert | "Fe+3, İnoculum from another operated MFC+ Synthetic media, 4.5, 0.86 mW/ m2, [10…" · substrate=Synthetic media | Ausgeschlossen: außerhalb physikalischer Grenzen |
| Open Circuit Voltage | 1,33 | V | 80 % | extrahiert | "Permanganate, Anaerobic inoculum+Synthetic media, 1.33, 115.6 mW/m2, [68]" · substrate=Synthetic media | Modellierbar |
| Open Circuit Voltage | 0,73 | V | 80 % | extrahiert | "Permanganate, Anaerobic inoculum+Synthetic media, 0.73, 93.13 mW/m2, [69]" · substrate=Synthetic media with glucose | Modellierbar |
| Open Circuit Voltage | 0,67 | V | 80 % | extrahiert | "Oxygen, Pre-treated anaerobic inoculum+synthetic media, 0.67, 17.43 mW/m2, [64]" · substrate=Synthetic media | Modellierbar |
| Open Circuit Voltage | 1,56Außerhalb des physikalischen Bereichs, Quelle prüfen | V | 80 % | extrahiert | "Calcium Hypochlorite, Slaughterhouse waste water, 1.56, 12.26 mW/m2, [84]" · substrate=Slaughterhouse wastewater | Ausgeschlossen: außerhalb physikalischer Grenzen |
| Open Circuit Voltage | 1,11 | V | 80 % | extrahiert | "Permanganate, Anaerobic inoculum+Synthetic media, 1.11, 116.2 mW/m2, [33]" · substrate=Synthetic media | Modellierbar |
| Open Circuit Voltage | 1,06 | V | 80 % | extrahiert | "Sodium Hypochlorite, Pre-treated anaerobic inoculum+synthetic media, 1.06, 148.4…" · substrate=Synthetic media | Modellierbar |
| Open Circuit Voltage | 0,56 | V | 80 % | extrahiert | "Dichromate, Anaerobic inoculum+Synthetic media, 0.56, 0.79 mW/m2, [33]" · substrate=Synthetic media | Modellierbar |
| Open Circuit Voltage | 0,78 | V | 80 % | extrahiert | "Ferricyanide, Anaerobic inoculum+Synthetic media, 0.78, 40.6 mW/m2, [33]" · substrate=Synthetic media | Modellierbar |
| Open Circuit Voltage | 0,589 | V | 80 % | extrahiert | "Oxygen, Domestic wastewater+ Synthetic media, 0.589, -, [61]" · substrate=Domestic wastewater and Synthetic media | Modellierbar |
| Power Density | 12,3 | mW/m² | 75 % | extrahiert | "Calcium Hypochlorite, Slaughterhouse waste water, 1.56, 12.26 mW/m2, [84]" · substrate=Slaughterhouse wastewater | Modellierbar |
| Open Circuit Voltage | 1,63Außerhalb des physikalischen Bereichs, Quelle prüfen | V | 75 % | extrahiert | "Dai et al. [62] evaluated sodium bromate as an alternative electron acceptor. Th…" · condition_hint=100 mM NaBrO3 | Ausgeschlossen: außerhalb physikalischer Grenzen |
| Power Density | 10,2 | mW/m² | 75 % | extrahiert | "Oxygen, Anaerobic inoculum+Synthetic media, -, 10.2 mW/m2, [68]" · substrate=Synthetic media | Modellierbar |
| Power Density | 17,4 | mW/m² | 75 % | extrahiert | "Oxygen, Pre-treated anaerobic inoculum+synthetic media, 0.67, 17.43 mW/m2, [64]" · substrate=Synthetic media | Modellierbar |
| Power Density | 116 | mW/m² | 75 % | extrahiert | "Permanganate, Anaerobic inoculum+Synthetic media, 1.11, 116.2 mW/m2, [33]" · substrate=Synthetic media | Modellierbar |
| Power Density | 22 | mW/m² | 75 % | extrahiert | "Hydrogen peroxide, Anaerobic inoculum+Synthetic media, 22 mW/ m2, [80]" · substrate=Synthetic media | Modellierbar |
| Power Density | 0,79 | mW/m² | 75 % | extrahiert | "Dichromate, Anaerobic inoculum+Synthetic media, 0.56, 0.79 mW/m2, [33]" · substrate=Synthetic media | Modellierbar |
| Open Circuit Voltage | 0,778 | V | 75 % | extrahiert | "Kumar et al. [91] obtained an open circuit voltage of 778 mV and a power density…" · condition_hint=Hg2+ as only electron acceptor | Modellierbar |
| Power Density | 116 | mW/m² | 75 % | extrahiert | "Permanganate, Anaerobic inoculum+Synthetic media, 1.33, 115.6 mW/m2, [68]" · substrate=Synthetic media | Modellierbar |
| Power Density | 148 | mW/m² | 75 % | extrahiert | "Sodium Hypochlorite, Pre-treated anaerobic inoculum+synthetic media, 1.06, 148.4…" · substrate=Synthetic media | Modellierbar |
| Power Density | 40,6 | mW/m² | 75 % | extrahiert | "Ferricyanide, Anaerobic inoculum+Synthetic media, 0.78, 40.6 mW/m2, [33]" · substrate=Synthetic media | Modellierbar |
| Power Density | 88 | mW/m² | 75 % | extrahiert | "Nitrate, river sediment inoculum+domestic wastewater, -, 88 mW/ m2, [86]" · substrate=Domestic wastewater | Modellierbar |
Methodik
Welches System und wie es betrieben wurde
Methodik
Methodology
This is a narrative review article that synthesizes published MFC studies on electron acceptors, system design, and operating conditions. The authors discuss electrode materials, mediators, membranes, environmental factors (pH, temperature, conductivity), substrate types, and alternative electron acceptors (oxygen, ferricyanide, permanganate, and others). The review cites experimental results from prior studies but does not present original data or systematic meta-analysis. The focus is on cathode electron acceptors and their effects on power generation and treatment performance.
Betriebsparameter
| Feld | Wert |
|---|---|
| substrate | ["glucose","acetate","wastewater","cellulose"] |
Betriebsbedingungen
24 Läufe extrahiert| Lauf | T°C | pHAnolyt | pHKatholyt | Substrat | [S]mg/L | HRTh | Modus | R_extΩ | V_appV | Inokulum |
|---|---|---|---|---|---|---|---|---|---|---|
| v2-0a0116cbc9a86185 | — | — | — | Molasses | — | — | — | — | — | — |
| v2-2064c65f0107df75 | — | — | — | Synthetic media with glucose | — | — | — | — | — | — |
| v2-2ab94f79a799aa60 | — | — | — | Synthetic wastewater | — | — | — | — | — | — |
| v2-35ee98cb150bf504 | — | — | — | Domestic wastewater | — | — | — | — | — | — |
| v2-3aa9ff9e2ec4e57c | — | — | — | — | — | — | steady_state | — | — | — |
| v2-5115f1e9272250c2 | — | — | — | Sulfur and glucose | — | — | — | — | — | — |
| v2-5a64385a65a69860 | — | — | — | Acid orange 7 dye | — | — | — | — | — | — |
| v2-6a4cfdd66e411519 | — | — | — | Food waste leachate | — | — | — | — | — | — |
| v2-6c755cdbad9f594c | — | — | — | 4-chlorophenol | 200 | — | — | — | — | — |
| v2-6f98461c12d23214 | — | — | — | Corn straw and sulfide | — | — | — | — | — | — |
| v2-79e67c814a2bf306 | — | — | — | Sewage sludge with FePO4 | — | — | — | — | — | — |
| v2-84cdf2ceecb2ffa8 | — | — | — | 4-chlorophenol | — | — | — | — | — | — |
| v2-8cf55aa04915050b | — | — | — | Glucose | — | — | — | — | — | — |
| v2-8fb397e6af657654 | — | — | — | Methylene blue and H2O2 | — | — | — | — | — | — |
| v2-a4522fcf296ea461 | — | — | — | Reactive dye | — | — | — | — | — | — |
| v2-aae8c45289c177ad | — | — | — | Synthetic media | — | — | — | — | — | — |
| v2-b232cb9f7fd706cd | — | — | — | Domestic and industrial wastewater | — | — | — | — | — | — |
| v2-b96f96ea48d89903 | — | — | — | Pentachlorophenol | — | — | — | — | — | — |
| v2-bf106c7e131d622a | — | — | — | Nitrobenzene | — | — | — | — | — | — |
| v2-c4d957f98f471fd1 | — | — | — | — | 200 | — | steady_state | — | — | — |
| v2-c5311717c2eb75be | — | — | — | Slaughterhouse wastewater | — | — | — | — | — | — |
| v2-d2c16297485455a2 | — | — | — | Azo dye | — | — | — | — | — | — |
| v2-e8181ef6964d98e6 | — | — | — | Domestic wastewater and Synthetic media | — | — | — | — | — | — |
| v2-f586e9af22985397 | — | — | — | — | — | — | — | — | — | — |
Extraktionspipeline
Rohextraktionen, Artefakte, Qualitätssignal
Extraktionsqualität
EhrlichkeitssignalBemessen Sie Ihr Vertrauen in die extrahierten Inhalte an diesen Signalen – so hat die Pipeline ihre eigene Ausgabe für diese Publikation bewertet.
Parametervollständigkeit
13 %
Anteil der erwarteten Parameter, die extrahiert wurden
Datenvollständigkeit
40 %
Gesamtabdeckung der Extraktion über alle Felder
KI-Konfidenz
72 %
Vom Modell selbst angegebene Konfidenz
Mittlere Parameterkonfidenz
72 %
Durchschnittliche Konfidenz der oben angezeigten PaperParameter-Zeilen
vor dem Zitieren mit dem Quell-PDF abgleichen · Werte 0–1
Diagramm-Explorer
Verändern Sie die Eingaben dieser Publikation und sehen Sie, wie sich das vorhergesagte Ergebnis verschiebt.
Modell erkunden
Der Reaktor in 3D, mit Strömung, die sich ein- und ausschalten lässt.
KI-Erkenntnisse
Widersprüche, Lücken und Chancen aus dem Vergleich dieser Publikation mit dem Korpus.
Ähnliche Publikationen vergleichen
Die nächsten Publikationen nach System, Materialien und Organismen, mit ihren Ergebnissen nebeneinander.
Quell-PDF
Die Publikation, wie sie erschienen ist.
Repräsentatives Modell, generisches MFC
Zum Interagieren tippenRepräsentatives Modell, generisches MFC
Repräsentatives Modell: MFC – zugeordnet nur anhand des Systemtyps der Publikation, nicht ihres Reaktors oder ihrer Geometrie.
Schlagwörter
- Microbial fuel cell
- Electricity generation
- Waste management
- Electron acceptor
- Electricity
- Fuel cells
Zitieren
Elif DURNA PİŞKİN (2024). Microbial fuel cells in electricity generation with waste treatment: Alternative electron acceptors. Sigma Journal of Engineering and Natural Sciences – Sigma Mühendislik ve Fen Bilimleri Dergisi. https://doi.org/10.14744/sigma.2024.00022
Öffnen Sie das Modell im Labor, um alle Steuerelemente, die Parameterbearbeitung und Vorlagen-Overlays zu nutzen.
Im Labor öffnen