Forschungsdaten – Titel und Zusammenfassungen von Publikationen, extrahierte Daten und Katalogeinträge – erscheinen in ihrer Originalsprache Englisch.
Publikation · MFC
Microbial fuel cells: methodology and technology.
Zusammenfassung
Was die Publikation berichtet, in ihren eigenen Worten.
Zusammenfassung
Microbial fuel cell (MFC) research is a rapidly evolving field that lacks established terminology and methods for the analysis of system performance. This makes it difficult for researchers to compare devices on an equivalent basis. The construction and analysis of MFCs requires knowledge of different scientific and engineering fields, ranging from microbiology and electrochemistry to materials and environmental engineering. Describing MFC systems therefore involves an understanding of these different scientific and engineering principles. In this paper, we provide a review of the different materials and methods used to construct MFCs, techniques used to analyze system performance, and recommendations on what information to include in MFC studies and the most useful ways to present results.
KI-Zusammenfassung
90 % KonfidenzMFC research in bacteria. Microbial fuel cell (MFC) research is a rapidly evolving field that lacks established terminology an...
Erstellt von der MESSAI-Extraktionspipeline · mit dem Quell-PDF abgleichen
Extrahierte Werte
Jeder aus der Publikation entnommene Wert mit seiner Quelle, damit sich jede Zahl am Text prüfen lässt.
n = 15 extrahierte Werte
Wählen Sie eine Quellenangabe, um Zitat, Seite und Konfidenz hinter einem Wert zu sehen.
11 von 15 extrahierten Zeilen modellierbar
- 4 nicht kanonisiert (kein kanonischer Slug)
| Parameter | Wert | Einheit | Konfidenz | Quelle | Anmerkungen | Modellierbar |
|---|---|---|---|---|---|---|
| External Load | 100 | Ohm | 95 % | extrahiert | "The fixed resistor of 100 Ohms was used in closed circuit condition to calculate…" · condition_hint=closed circuit operation, external_resistance_ohm=100 | Modellierbar |
| Electrode Surface Area | 150 | cm² | 95 % | extrahiert | "Untreated carbon cloth measuring 150 cm2 was fixed with a silicone sealant just …" · condition_hint=anode and cathode electrode size, electrode_material=carbon cloth | Modellierbar |
| Current Density | 190 | mA/m² | 90 % | daily power generation recording, normalized to effective anode area | "Azolla amended planted reactors produced the current density of 205 mA/m2 and 19…" · substrate=paddy soil with paddy plant and Azolla | Modellierbar |
| Current Density | 66 | mA/m² | 90 % | daily power generation recording, normalized to effective anode area | "against planted reactors without amendment, i.e. 66 mA/m2 and 109 mA/m2." · substrate=paddy soil with paddy plant | Modellierbar |
| Current Density | 109 | mA/m² | 90 % | daily power generation recording, normalized to effective anode area | "against planted reactors without amendment, i.e. 66 mA/m2 and 109 mA/m2." · substrate=paddy soil with paddy plant | Modellierbar |
| Open Circuit Voltage | 630 | mV | 90 % | multimeter offline and data acquisition online | "Figure 2 illustrates an average OCV from six reactors maximum value of which was…" · substrate=paddy soil | Modellierbar |
| Current Density | 31 | mA/m² | 90 % | daily power generation recording, normalized to effective anode area | "While unplanted sediment reactors only gave an average 32 mA/m2 and 31 mA/m2 (Fi…" · substrate=paddy soil | Modellierbar |
| Current Density | 32 | mA/m² | 90 % | daily power generation recording, normalized to effective anode area | "While unplanted sediment reactors only gave an average 32 mA/m2 and 31 mA/m2 (Fi…" · substrate=paddy soil | Modellierbar |
| Current Density | 205 | mA/m² | 90 % | daily power generation recording, normalized to effective anode area | "Azolla amended planted reactors produced the current density of 205 mA/m2 and 19…" · substrate=paddy soil with paddy plant and Azolla | Modellierbar |
| Power Density | 22 | mW/m² | 85 % | polarization curve | "The maximum power density as depicted by power curve was 22 mw/m2 for the plante…" · substrate=paddy soil with paddy plant | Modellierbar |
| Power Density | 3,3 | mW/m² | 85 % | polarization curve | "unplanted reactor (R1) only yielded 3.3 mW/m2 (Figure 5)." · substrate=paddy soil | Modellierbar |
| Power Increase Factor | 1,84 | — | 80 % | polarization curve | "The maximum power in planted reactors was greater by 84% as depicted by power cu…" · substrate=paddy soil with paddy plant | Ausgeschlossen: nicht kanonisiert (kein kanonischer Slug) |
| Current Increase Factor | 3 | — | 75 % | daily voltage recording across 100 ohms | "After a week of transplanting paddy, the planted reactors significantly showed a…" · substrate=paddy soil with paddy plant | Ausgeschlossen: nicht kanonisiert (kein kanonischer Slug) |
| Current Increase Factor with Azolla | 3 | — | 75 % | daily current recording | "amended planted reactors with Azolla enhanced the current generation by almost t…" · substrate=paddy soil with paddy plant and Azolla | Ausgeschlossen: nicht kanonisiert (kein kanonischer Slug) |
| Current Increase Factor Planted vs Sediment | 2 | — | 75 % | daily current recording | "planted reactors produced current twice than that of from sediments only." · substrate=paddy soil with paddy plant | Ausgeschlossen: nicht kanonisiert (kein kanonischer Slug) |
Methodik
Welches System und wie es betrieben wurde
Methodik
Methodology
The paper reviews and provides recommendations on the construction and analysis of MFCs, including materials, methods, and techniques for evaluating system performance.
Leistungskennzahlen
| Feld | Wert |
|---|---|
| citation count | 5202 |
Betriebsbedingungen
6 Läufe extrahiert| Lauf | T°C | pHAnolyt | pHKatholyt | Substrat | [S]mg/L | HRTh | Modus | R_extΩ | V_appV | Inokulum |
|---|---|---|---|---|---|---|---|---|---|---|
| v2-02cc3c3918717a28 | — | — | — | paddy soil with paddy plant | — | — | — | — | — | — |
| v2-034569da145836ac | — | — | — | paddy soil with paddy plant and Azolla | — | — | — | 100 | — | — |
| v2-4d3a2dde0649cde8 | — | — | — | — | — | — | — | 100 | — | — |
| v2-7752f3522030b16a | — | — | — | paddy soil with paddy plant | — | — | — | 100 | — | — |
| v2-81fe875fb04b407e | — | — | — | paddy soil | — | — | — | — | — | — |
| v2-84177c10116f8d94 | — | — | — | paddy soil | — | — | — | 100 | — | — |
Extraktionspipeline
Rohextraktionen, Artefakte, Qualitätssignal
Extraktionsqualität
EhrlichkeitssignalBemessen Sie Ihr Vertrauen in die extrahierten Inhalte an diesen Signalen – so hat die Pipeline ihre eigene Ausgabe für diese Publikation bewertet.
Parametervollständigkeit
13 %
Anteil der erwarteten Parameter, die extrahiert wurden
Datenvollständigkeit
40 %
Gesamtabdeckung der Extraktion über alle Felder
KI-Konfidenz
90 %
Vom Modell selbst angegebene Konfidenz
Mittlere Parameterkonfidenz
86 %
Durchschnittliche Konfidenz der oben angezeigten PaperParameter-Zeilen
vor dem Zitieren mit dem Quell-PDF abgleichen · Werte 0–1
Diagramm-Explorer
Verändern Sie die Eingaben dieser Publikation und sehen Sie, wie sich das vorhergesagte Ergebnis verschiebt.
Modell erkunden
Der Reaktor in 3D, mit Strömung, die sich ein- und ausschalten lässt.
KI-Erkenntnisse
Widersprüche, Lücken und Chancen aus dem Vergleich dieser Publikation mit dem Korpus.
Ähnliche Publikationen vergleichen
Die nächsten Publikationen nach System, Materialien und Organismen, mit ihren Ergebnissen nebeneinander.
Quell-PDF
Die Publikation, wie sie erschienen ist.
Repräsentatives Modell, generisches MFC
Zum Interagieren tippenRepräsentatives Modell, generisches MFC
Repräsentatives Modell: MFC – zugeordnet nur anhand des Systemtyps der Publikation, nicht ihres Reaktors oder ihrer Geometrie.
Schlagwörter
- Microbial fuel cell
- Terminology
- Biochemical engineering
- Systems engineering
- Field (mathematics)
- Fuel cells
Zitieren
B. Logan, B. Hamelers, R. Rozendal et al. (2006). Microbial fuel cells: methodology and technology. Environmental Science & Technology. https://doi.org/10.1021/ES0605016
- Zeitschrift
- Environmental Science & Technology
Öffnen Sie das Modell im Labor, um alle Steuerelemente, die Parameterbearbeitung und Vorlagen-Overlays zu nutzen.
Im Labor öffnen