Forschungsdaten – Titel und Zusammenfassungen von Publikationen, extrahierte Daten und Katalogeinträge – erscheinen in ihrer Originalsprache Englisch.

Forschung

Publikation

A laboratory-scale study of the applicability of a halophilic sediment bioelectrochemical system for in situ reclamation of water and sediment in brackish aquaculture ponds: effects of operational conditions on performance.

01

Zusammenfassung

Was die Publikation berichtet, in ihren eigenen Worten.

KI-angereichert· 72 %

Zusammenfassung

Sediment bioelectrochemical systems (SBESs) can be integrated into brackish aquaculture ponds for in-situ bioremediation of the pond water and sediment. Such an in-situ system offers advantages including reduced treatment cost, reusability and simple handling. In order to realize such an application potential of the SBES, in this laboratory-scale study we investigated the effect of several controllable and uncontrollable operational factors on the in-situ bioremediation performance of a tank model of a brackish aquaculture pond, into which a SBES was integrated, in comparison with a natural degradation control model. The performance was evaluated in terms of electricity generation by the SBES, COD removal and nitrogen removal of both the tank water and the tank sediment. Real-life conditions of the operational parameters were also experimented to understand the most close-to-practice responses of the system to their changes. Predictable effects of controllable parameters including external resistance and electrode spacing, similar to those reported previously for the BESs, were shown by the results but exceptions were observed. Accordingly, while increasing the electrode spacing reduced the current densities but generally improved COD and nitrogen removal, increasing the external resistance could result in decreased COD removal but also increased nitrogen removal and decreased current densities. However, maximum electricity generation and COD removal efficiency difference of the SBES (versus the control) could be reached with an external resistance of 100 Ω, not with the lowest one of 10 Ω. The effects of uncontrollable parameters such as ambient temperature, salinity and pH of the pond (tank) water were rather unpredictable. Temperatures higher than 35 °C seemed to have more accelaration effect on natural degradation than on bioelectrochemical processes. Changing salinity seriously changed the electricity generation but did not clearly affect the bioremediation performance of the SBES, although at 2.5% salinity the SBES displayed a significantly more efficient removal of nitrogen in the water, compared to the control. Variation of pH to practically extreme levels (5.5 and 8.8) led to increased electricity generations but poorer performances of the SBES (vs. the control) in removing COD and nitrogen. Altogether, the results suggest some distinct responses of the SBES under brackish conditions and imply that COD removal and nitrogen removal in the system are not completely linked to bioelectrochemical processes but electrochemically enriched bacteria can still perform non-bioelectrochemical COD and nitrogen removals more efficiently than natural ones. The results confirm the application potential of the SBES in brackish aquaculture bioremediation and help propose efficient practices to warrant the success of such application in real-life scenarios.

KI-Zusammenfassung

72 % Konfidenz

This laboratory-scale sediment bioelectrochemical system (SBES) study in brackish aquaculture models reveals that nitrogen and COD removal are not simply linked to electricity generation. Operating at 188 Ω external resistance maximized ammonia removal (43% water TAN, 40% sediment TAN efficiency gain over control), while 100 Ω maximized power output and COD removal. Increased electrode spacing (13 cm vs 10 cm default) improved COD and TKN removal despite reducing current density. Temperature >35°C and extreme pH (5.5, 8.8) boosted electricity but degraded bioremediation versus control, suggesting non-bioelectrochemical pathways dominate under stress. At 2.5% salinity, nitrogen removal was significantly enhanced.

Zentrale Erkenntnisse

  • Zielkonflikt External resistance of 188 Ω achieved maximum TAN removal efficiency difference (43.2% water, 39.7% sediment) despite generating only 0.83 mA/m² current, whereas 100 Ω maximized power (0.08 mW/m²) but not nitrogen removal.

    Was heißt das. Operators targeting ammonia recovery should use 188 Ω, not the lowest resistance; nitrogen removal and power generation require different resistance setpoints.

  • Zielkonflikt Increasing electrode spacing by 30% (10→13 cm) decreased current density from 1.78 to 1.4 mA/m² but increased water COD removal efficiency difference from 20% to 30% and sediment TAN removal from 20% to 30%.

    Was heißt das. Deeper electrode spacing improves bioremediation despite lower current; design for treatment efficacy, not power density, in aquaculture applications.

  • Schwellenwert Temperatures >35°C increased current density (peak 2.15 mA/m² at 35°C) but did not improve COD or nitrogen removal versus control; only 35°C showed 18% higher water TKN removal.

    Was heißt das. High temperature accelerates natural degradation as much as bioelectrochemical processes; thermal stress does not guarantee treatment advantage in brackish systems.

  • Mechanismus At 2.5% salinity, SBES showed significantly more efficient nitrogen removal in water versus control, whereas salinity changes 0.5–2.0% did not clearly affect bioremediation despite serious changes in electricity generation.

    Was heißt das. Salinity decouples electricity generation from nitrogen removal; optimize salinity near 2.5% if nitrogen is the priority, independent of power output.

  • Schwellenwert pH extremes (5.5 and 8.8) increased electricity generation but resulted in poorer COD and nitrogen removal versus control compared to neutral pH 7.

    Was heißt das. Maintain pH near 7 for bioremediation; extreme pH favors electrochemistry but inhibits microbial nitrogen cycling pathways.

Widersprüche4

Nur Konflikte, die die Publikation selbst zeigt, jeweils am Text geprüft.

  • Innerhalb der Publikation Electricity generation and COD/nitrogen removal show opposite responses to external resistance changes

    Eine Seite

    At 100 Ω, current density reached highest level (~1.7 mA/m²) and maximum COD removal efficiency difference (28%) was achieved

    “at 100 Ω, the current generated by the SBES was at a level of around 1.7 mA m⁻²...The maximum removal efficiency difference of 28 ± 6% was achieved at the external resistance level of 100 Ω.”
    Andere Seite

    For nitrogen removal, maximum TAN efficiency difference (43.2% water, 39.7% sediment) was achieved at 188 Ω, where current density was only 0.83 mA/m²

    “at the external resistance level of 188 Ω, the removal efficiency difference could maximally reach 43.2 ± 2.4% for water TAN and 39.7 ± 4.6% for sediment TAN”

    Einordnung der Autoren. Authors note that nitrogen removal performance 'was not fully correlated to the changes in its electricity generation,' suggesting bioelectrochemical nitrification/denitrification operates at different electrochemical conditions than COD oxidation or power generation.

  • Innerhalb der Publikation Electrode spacing increases reduce current density but improve bioremediation

    Eine Seite

    Increasing electrode spacing by 30% (10→13 cm) decreased current density from 1.78 to 1.4 mA/m²

    “when the electrode spacing increased by 30%, the current density decreased to less than 1.4 mA m⁻², significantly lower than that with the default electrode distance, which was around 1.78 mA m⁻²”
    Andere Seite

    The same 30% increase in spacing increased water COD removal efficiency difference from 20% to 30% and sediment TAN removal from 20% to 30%

    “increasing the electrode spacing (by 30%) can improve the COD and nitrogen removal efficiency differences of the SBES versus natural degradation”

    Einordnung der Autoren. Authors observe this is 'quite opposite' to expected behavior; larger spacing may reduce ohmic losses or allow better diffusion of substrates/products, decoupling electrical performance from treatment efficacy.

  • Innerhalb der Publikation Temperature elevation boosts electricity but not bioremediation versus control

    Eine Seite

    Current density reached highest value of 2.15 ± 0.08 mA/m² at 35°C, significantly higher than 30°C default (1.94 mA/m²)

    “The density of electrical current generated by the SBES reached the highest value of 2.15 ± 0.08 mA m⁻² at 35°C, while it was ca. 1.94 mA m⁻² at 30°C”
    Andere Seite

    Temperatures higher than 30°C did not result in more efficient COD and nitrogen removals of the test tank versus the control, with only one exception (18% higher water TKN at 35°C)

    “temperatures higher than 30°C (the default value) did not result in more efficient COD and nitrogen removals of the test tank versus the control”

    Einordnung der Autoren. Authors conclude 'Temperatures higher than 35 °C seemed to have more acceleration effect on natural degradation than on bioelectrochemical processes,' indicating temperature accelerates both pathways equally or favors abiotic/heterotrophic processes over electroactive bacteria.

  • Innerhalb der Publikation Salinity dramatically affects electricity but not bioremediation performance

    Eine Seite

    Changing salinity seriously changed the electricity generation (implied by current density variations across 0.5–2.5% range)

    “Changing salinity seriously changed the electricity generation”
    Andere Seite

    Salinity did not clearly affect the bioremediation performance of the SBES, although at 2.5% salinity the SBES displayed significantly more efficient removal of nitrogen in the water compared to the control

    “did not clearly affect the bioremediation performance of the SBES, although at 2.5% salinity the SBES displayed a significantly more efficient removal of nitrogen in the water, compared to the control”

    Einordnung der Autoren. Authors attribute this to halophilic bacterial enrichment in the SBES that maintains nitrogen removal capacity across salinity ranges despite conductivity-driven changes in electrochemistry; suggests microbial adaptation decouples electrical from biological performance.

Ansatzpunkte6

Konkrete Lücken in dieser Publikation, jeweils mit einem Experiment, das sie schließen würde.

  • Hoch No measurement of dissolved oxygen (DO) in water or sediment across any operational condition; DO is critical for nitrification kinetics and N2O formation risk

    Paper measures nitrogen removal (TKN, TAN) but does not report DO levels, which directly control whether nitrification or denitrification dominates and whether N2O accumulates. Abstract mentions 'nitrogen removal' but does not specify pathways or N2O.

    Versuch. Measure DO in water column and sediment pore water at each external resistance (10, 100, 188, 1875, 4690 Ω), electrode spacing (7, 10, 13 cm), and temperature (14, 25, 30, 35, 40°C) condition; correlate with TKN, NO3−, NO2−, and N2O concentrations.

  • Hoch No speciation of nitrogen products: paper reports only TKN and TAN (NH4+), not NO3−, NO2−, or N2O; cannot determine if system nitrifies, denitrifies, or accumulates toxic intermediates

    Results show 'nitrogen removal' but do not distinguish between ammonia oxidation to nitrate, denitrification to N2, or N2O production. At 188 Ω with high TAN removal (43%), the fate of nitrogen is unknown—critical for aquaculture safety and regulatory compliance.

    Versuch. Measure NO3−-N, NO2−-N, and N2O in water and sediment at key conditions (188 Ω, 100 Ω, 10 Ω external resistance; 30°C, 35°C; pH 7, 5.5, 8.8) using ion chromatography and gas chromatography; establish N balance.

  • Hoch No investigation of cathode potential or anode potential; paper only reports external resistance and current, not electrode potentials that drive nitrification/denitrification

    Nitrification and denitrification are potential-dependent processes. Paper varies external resistance (10–4690 Ω) and shows nitrogen removal peaks at 188 Ω, but does not measure anode or cathode potential against reference electrode (Ag/AgCl reference electrode is mentioned as available but not used in main experiments).

    Versuch. Measure anode and cathode potential vs. Ag/AgCl reference electrode at each external resistance level (10, 100, 188, 1875, 4690 Ω) and correlate with TAN, NO3−, NO2−, and N2O concentrations; establish electrochemical window for optimal nitrogen cycling.

  • Mittel No variation of C/N ratio or organic loading rate; paper uses fixed feed rate (0.051 g/d, 8 mg COD/L/d) and does not test how substrate availability affects nitrogen removal pathways

    Nitrogen removal efficiency varies with external resistance and electrode spacing, but substrate (COD) is constant. At 188 Ω, high TAN removal may be limited by carbon availability for denitrification or may indicate nitrification without subsequent denitrification.

    Versuch. Test COD loading rates of 4, 8, 16, 32 mg/L/d at fixed 188 Ω external resistance and measure TAN, NO3−, NO2−, N2O, and TKN removal; establish optimal C/N ratio for complete nitrogen removal.

  • Mittel No measurement of HRT (hydraulic retention time) or water exchange; paper operates as closed batch system for 3–7 days per condition, not continuous flow

    Real aquaculture ponds have continuous inflow/outflow. Paper's batch design may not reflect steady-state nitrogen cycling or accumulation of intermediates (NO2−, N2O) that would be flushed in continuous operation.

    Versuch. Operate SBES in semi-continuous mode with HRT of 5, 10, 20 days at 188 Ω external resistance and measure TAN, NO3−, NO2−, N2O, and TKN removal over 60 days; compare to batch results.

  • Mittel No investigation of pH effect on nitrogen speciation or nitrification/denitrification rates; paper tests pH 5.5, 7, 8.8 but only reports total nitrogen removal, not pathway

    pH 5.5 and 8.8 increased electricity but decreased nitrogen removal versus control. Nitrification and denitrification have different pH optima (nitrification ~7–8, denitrification ~6.5–7.5). Paper does not measure NO3−, NO2−, or N2O at each pH to explain the mechanism.

    Versuch. Measure NO3−-N, NO2−-N, N2O, and nitrification/denitrification enzyme activity (or gene expression) at pH 5.5, 7, 8.8 with 188 Ω external resistance; establish pH window for complete nitrogen removal without N2O accumulation.

Erstellt von der MESSAI-Extraktionspipeline · mit dem Quell-PDF abgleichen

02

Extrahierte Werte

Jeder aus der Publikation entnommene Wert mit seiner Quelle, damit sich jede Zahl am Text prüfen lässt.

n = 64 extrahierte Werte

Wählen Sie eine Quellenangabe, um Zitat, Seite und Konfidenz hinter einem Wert zu sehen.

29 von 63 extrahierten Zeilen modellierbar

  • 3 nicht kanonisiert (kein kanonischer Slug)
  • 22 kein SI-Wert
  • 9 Verifizierer hat den Wert abgelehnt
ParameterWertEinheitKonfidenzQuelleAnmerkungenModellierbar
Temperature[object Object]°C80 %
llm
Chamber Volume6L95 %
extrahiert
"In the default operation, pre-mixed artificial brackish water (1.5% in salinity,…" · T=30°C, pH(an)=7, substrate=shrimp feed (GAMMA 6)Modellierbar
Electrode Surface Area1,08m²95 %
extrahiert
"Power density and current density were calculated with the total anode surface a…" · condition_hint=design parameter, anode surface area for normalization, electrode_material=graphite granules and graphite feltModellierbar
Organic Loading Rate8mg l⁻¹ d⁻¹95 %
extrahiert
"Each tank was fed with the shrimp feed GAMMA 6 (TOMBOY Co., Vietnam) at a rate o…" · T=30°C, pH(an)=7, substrate=shrimp feed (GAMMA 6)Modellierbar
Operating Voltage150mV95 %
polarization curve
"Its polarization curve (Fig. 1) showed that the maximum working voltage it could…" · T=30°C, pH(an)=7, substrate=shrimp feed (GAMMA 6), steady_stateModellierbar
Maximum Power Density0,08mW m⁻²95 %
power curve
"Its power curve (Fig. 1) showed a maximum attainable power density of about 0.08…" · T=30°C, pH(an)=7, substrate=shrimp feed (GAMMA 6), steady_stateModellierbar
Current Density1,28mA m⁻²90 %
chronoamperometry
"It showed significant signals of declination at 40oC and clearly decreased down …" · T=25°C, pH(an)=7, substrate=shrimp feed (GAMMA 6), steady_stateModellierbar
Current Density1,94mA m⁻²90 %
chronoamperometry
"The density of electrical current generated by the SBES reached the highest valu…" · T=30°C, pH(an)=7, substrate=shrimp feed (GAMMA 6), steady_stateModellierbar
Total Ammonia Nitrogen Removal Rate19,6%90 %
nessler method
"However, at pH 5.5, the percentage of water TAN that the SBES could remove more …" · T=30°C, pH(an)=7, substrate=shrimp feed (GAMMA 6), steady_stateAusgeschlossen: kein SI-Wert
Total Ammonia Nitrogen Removal Rate21,4%90 %
nessler method
"However, at pH 5.5, the percentage of water TAN that the SBES could remove more …" · T=30°C, pH(an)=5.5, substrate=shrimp feed (GAMMA 6), steady_stateAusgeschlossen: kein SI-Wert
Current Density2,15mA m⁻²90 %
chronoamperometry
"The density of electrical current generated by the SBES reached the highest valu…" · T=35°C, pH(an)=7, substrate=shrimp feed (GAMMA 6), steady_stateModellierbar
Current Density0,44mA m⁻²90 %
chronoamperometry
"It showed significant signals of declination at 40oC and clearly decreased down …" · T=14°C, pH(an)=7, substrate=shrimp feed (GAMMA 6), steady_stateModellierbar
Current Density1,7mA m⁻²90 %
chronoamperometry
"Specifically, at 100 Ω, the current generated by the SBES was at a level of arou…" · T=30°C, pH(an)=7, substrate=shrimp feed (GAMMA 6), steady_stateModellierbar
Current Density0,83mA m⁻²90 %
chronoamperometry
"Specifically, at 100 Ω, the current generated by the SBES was at a level of arou…" · T=30°C, pH(an)=7, substrate=shrimp feed (GAMMA 6), steady_stateModellierbar
Current Density0,28mA m⁻²90 %
chronoamperometry
"Specifically, at 100 Ω, the current generated by the SBES was at a level of arou…" · T=30°C, pH(an)=7, substrate=shrimp feed (GAMMA 6), steady_stateModellierbar
Current Density0,11mA m⁻²90 %
chronoamperometry
"Specifically, at 100 Ω, the current generated by the SBES was at a level of arou…" · T=30°C, pH(an)=7, substrate=shrimp feed (GAMMA 6), steady_stateModellierbar
Current Density1,65mA m⁻²90 %
chronoamperometry
"At 10 Ω, the current density was around 1.65 mA m-2, slightly lower than that at…" · T=30°C, pH(an)=7, substrate=shrimp feed (GAMMA 6), steady_stateModellierbar
Current Density1,78mA m⁻²90 %
chronoamperometry
"However, when the electrode spacing increased by 30%, the current density decrea…" · T=30°C, pH(an)=7, substrate=shrimp feed (GAMMA 6), steady_stateModellierbar
Total Ammonia Nitrogen Removal Rate39,7%90 %
nessler method
"Notably, at the external resistance level of 188 Ω, the removal efficiency diffe…" · T=30°C, pH(an)=7, substrate=shrimp feed (GAMMA 6), steady_stateAusgeschlossen: kein SI-Wert
Total Ammonia Nitrogen Removal Rate43,2%90 %
nessler method
"Notably, at the external resistance level of 188 Ω, the removal efficiency diffe…" · T=30°C, pH(an)=7, substrate=shrimp feed (GAMMA 6), steady_stateAusgeschlossen: kein SI-Wert
Chemical Oxygen Demand (COD) Removal28%90 %
cod assay (closed-reflux)
"The maximum removal efficiency difference of 28 ± 6% was achieved at the externa…" · T=30°C, pH(an)=7, substrate=shrimp feed (GAMMA 6), steady_stateModellierbar
Chemical Oxygen Demand (COD) Removal20%85 %
cod assay (closed-reflux)
"Specifically, the removal efficiency difference for water COD decreased to ca. 1…" · T=30°C, pH(an)=7, substrate=shrimp feed (GAMMA 6), steady_stateModellierbar
Chemical Oxygen Demand (COD) Removal15%85 %
cod assay (closed-reflux)
"Specifically, the removal efficiency difference for water COD decreased to ca. 1…" · T=30°C, pH(an)=5.5, substrate=shrimp feed (GAMMA 6), steady_stateModellierbar
Total Ammonia Nitrogen Removal Rate30%85 %
nessler method
"This figure decreased (to ca. 15%) when the electrode distance decreased by 30% …" · T=30°C, pH(an)=7, substrate=shrimp feed (GAMMA 6), steady_stateAusgeschlossen: kein SI-Wert
Anode Potential-210mV vs. Ag/AgCl85 %
potentiometry vs. ag/agcl reference electrode
"while that at 10 Ω (around – 210 mV vs. Ag/AgCl) might not be optimal to stimula…" · T=30°C, pH(an)=7, substrate=shrimp feed (GAMMA 6), steady_stateAusgeschlossen: kein SI-Wert
25 von 62 angezeigt

Methodik

Welches System und wie es betrieben wurde

Methodik

Methodology

Two identical 6 L glass tank models of brackish aquaculture ponds were operated in parallel: one with an integrated SBES (test tank) and one without (control). The SBES consisted of a sediment anode (graphite granules + felt, 15×7×0.9 cm) and floating air cathode (graphite felt, same dimensions) connected via external resistor. Tanks were fed shrimp feed at 8 mg COD/L/d (equivalent to 50% uneaten feed in real ponds). Operational parameters (external resistance 10–4690 Ω, electrode spacing 7–13 cm, temperature 14–40°C, salinity 0.5–2.5%, pH 5.5–8.8) were varied one at a time while others remained at defaults (pH 7, 30°C, 1.5% salinity, 10 cm spacing, 10 Ω resistance). Each condition was tested for 3–7 days. Water and sediment samples were analyzed for COD (closed reflux colorimetric), total Kjeldahl nitrogen (TKN), and ammonium nitrogen (TAN, Nessler method). Electrical current and voltage were monitored continuously. Results were compared as removal efficiency difference (SBES vs. control) to isolate bioelectrochemical contribution from natural degradation.

Systemkonfiguration

FeldWert
reactor typeSBES
chamber config1-chamber

Biologische Parameter

FeldWert
inoculum sourcesediment

Leistungskennzahlen

FeldWert
citation count4

Betriebsparameter

FeldWert
temperature{"min":35,"max":35,"optimal":35}

Betriebsbedingungen

16 Läufe extrahiert
LaufT°CpHAnolytpHKatholytSubstrat[S]mg/LHRThModusR_extΩV_appVInokulum
v2-06c1427e22dc8c8d257—shrimp feed (GAMMA 6)8—steady_state10——
v2-27650bd090f27419407—shrimp feed (GAMMA 6)8—steady_state10——
v2-38e23f6fcdc6ac6a307—shrimp feed (GAMMA 6)8—steady_state1875——
v2-392c9657d1b4cec4307—shrimp feed (GAMMA 6)8—steady_state10——
v2-3dd67a4c4da0caee307—shrimp feed (GAMMA 6)8—steady_state4690——
v2-592df610702c584a305.5—shrimp feed (GAMMA 6)8—steady_state100——
v2-6e605c14b7e1f20d307—shrimp feed (GAMMA 6)8—steady_state1876——
v2-8c57eeb01eadda50307—shrimp feed (GAMMA 6)8——10——
v2-a0aac073b7bb8f1b307—shrimp feed (GAMMA 6)———10——
v2-ccaf6355fb8009fa307—shrimp feed (GAMMA 6)8—steady_state188——
v2-dc300343effac38f147—shrimp feed (GAMMA 6)8—steady_state10——
v2-df242bfb4797f177357—shrimp feed (GAMMA 6)8—steady_state10——
v2-e5ad9a1551911740307—shrimp feed (GAMMA 6)8—steady_state100——
v2-eb6882def4d29bf3308.8—shrimp feed (GAMMA 6)8—steady_state100——
v2-f586e9af22985397——————————
v2-f6c769cb101f1569307—shrimp feed (GAMMA 6)8—steady_state———

Extraktionspipeline

Rohextraktionen, Artefakte, Qualitätssignal

Extraktionsqualität

Ehrlichkeitssignal

Bemessen Sie Ihr Vertrauen in die extrahierten Inhalte an diesen Signalen – so hat die Pipeline ihre eigene Ausgabe für diese Publikation bewertet.

Parametervollständigkeit

50 %

Anteil der erwarteten Parameter, die extrahiert wurden

Datenvollständigkeit

60 %

Gesamtabdeckung der Extraktion über alle Felder

KI-Konfidenz

72 %

Vom Modell selbst angegebene Konfidenz

Mittlere Parameterkonfidenz

84 %

Durchschnittliche Konfidenz der oben angezeigten PaperParameter-Zeilen

vor dem Zitieren mit dem Quell-PDF abgleichen · Werte 0–1

03

Diagramm-Explorer

Verändern Sie die Eingaben dieser Publikation und sehen Sie, wie sich das vorhergesagte Ergebnis verschiebt.

04

Modell erkunden

Der Reaktor in 3D, mit Strömung, die sich ein- und ausschalten lässt.

05

KI-Erkenntnisse

Widersprüche, Lücken und Chancen aus dem Vergleich dieser Publikation mit dem Korpus.

06

Ähnliche Publikationen vergleichen

Die nächsten Publikationen nach System, Materialien und Organismen, mit ihren Ergebnissen nebeneinander.

07

Quell-PDF

Die Publikation, wie sie erschienen ist.

Dieser Publikation ist noch kein 3D-Modell zugeordnet. Die daraus extrahierten Werte stehen unter „Extrahierte Werte“.

0,08Milliwatt pro Quadratmeter
Bestes Ergebnis · Leistungsdichte
64
Extrahierte Werte
2019
Jahr

Schlagwörter

  • Brackish water
  • Sediment
  • Bioremediation
  • Environmental engineering
  • Effluent
  • Aquaculture

Zitieren

H. Pham, Phuong Ha Vu, Thuy T. M. Nguyen et al. (2019). A laboratory-scale study of the applicability of a halophilic sediment bioelectrochemical system for in situ reclamation of water and sediment in brackish aquaculture ponds: effects of operational conditions on performance. Journal of Microbiology and Biotechnology. https://doi.org/10.4014/jmb.1906.06052