Forschungsdaten – Titel und Zusammenfassungen von Publikationen, extrahierte Daten und Katalogeinträge – erscheinen in ihrer Originalsprache Englisch.

Forschung

Publikation · MFC

Influence of carbon-based cathodes on biofilm composition and electrochemical performance in soil microbial fuel cells

01

Zusammenfassung

Was die Publikation berichtet, in ihren eigenen Worten.

Interaktives 3D-Modell

Zusammenfassung

Increasing energy demands and environmental pollution concerns press for sustainable and environmentally friendly technologies. Soil microbial fuel cell (SMFC) technology has great potential for carbon-neutral bioenergy generation and self-powered electrochemical bioremediation. In this study, an in-depth assessment on the effect of several carbon-based cathode materials on the electrochemical performance of SMFCs is provided for the first time. An innovative carbon nanofibers electrode doped with Fe (CNFFe) is used as cathode material in membrane-less SMFCs, and the performance of the resulting device is compared with SMFCs implementing either Pt-doped carbon cloth (PtC), carbon cloth, or graphite felt (GF) as the cathode. Electrochemical analyses are integrated with microbial analyses to assess the impact on both electrogenesis and microbial composition of the anodic and cathodic biofilm. The results show that CNFFe and PtC generate very stable performances, with a peak power density (with respect to the cathode geometric area) of 25.5 and 30.4 mW m -2 , respectively. The best electrochemical performance was obtained with GF, with a peak power density of 87.3 mW m -2 . Taxonomic profiling of the microbial communities revealed differences between anodic and cathodic communities. The anodes were predominantly enriched with Geobacter and Pseudomonas species, while cathodic communities were dominated by hydrogen-producing and hydrogenotrophic bacteria, indicating H 2 cycling as a possible electron transfer mechanism. The presence of nitrate-reducing bacteria, combined with the results of cyclic voltammograms, suggests microbial nitrate reduction occurred on GF cathodes. The results of this study can contribute to the development of effective SMFC design strategies for field implementation.

02

Extrahierte Werte

Jeder aus der Publikation entnommene Wert mit seiner Quelle, damit sich jede Zahl am Text prüfen lässt.

n = 61 extrahierte Werte

Wählen Sie eine Quellenangabe, um Zitat, Seite und Konfidenz hinter einem Wert zu sehen.

30 von 61 extrahierten Zeilen modellierbar

  • 10 nicht kanonisiert (kein kanonischer Slug)
  • 8 kein SI-Wert
  • 11 nicht als modellierbar markiert
  • 2 widerspricht anderen Publikationen
ParameterWertEinheitKonfidenzQuelleAnmerkungenModellierbar
Electrode Surface Area×27cm95 %
extrahiert
"the cathode (7 × 7 × 0.4 cm) was encased between two sheets of titanium mesh" · condition_hint=SMFC design parameter, cathode length/widthAusgeschlossen: kein SI-Wert
Catalyst Loading×20,2mg cm⁻²95 %
extrahiert
"carbon cloth doped with Pt (Pt loading: 0.2 mg cm−2)" · condition_hint=SMFC design parameter, electrode_material=Pt-doped carbon cloth (PtC)Ausgeschlossen: kein SI-Wert
Total Organic Carbon14%95 %
soil analysis
"The physicochemical properties of the soil were assessed by an external company …" · pH(an)=7.2, substrate=soil organic matterAusgeschlossen: kein SI-Wert
Volatile Solids39%95 %
soil analysis
"The physicochemical properties of the soil were assessed by an external company …" · pH(an)=7.2, substrate=soil organic matterAusgeschlossen: kein SI-Wert
Soil Electrical Conductivity1.090mS cm⁻¹95 %
soil analysis
"The physicochemical properties of the soil were assessed by an external company …" · pH(an)=7.2, substrate=soil organic matterAusgeschlossen: nicht kanonisiert (kein kanonischer Slug)
Power Density25,5mW m⁻²95 %
polarization curve
"The results show that CNFFe and PtC generate very stable performances, with a pe…" · pH(an)=7.2, substrate=soil organic matter, steady_stateModellierbar
Power Density30,4mW m⁻²95 %
polarization curve
"The results show that CNFFe and PtC generate very stable performances, with a pe…" · pH(an)=7.2, substrate=soil organic matter, steady_stateModellierbar
Power Density4,29mW m⁻²95 %
polarization curve
"The lowest power was generated by SMFC-CC (0.021 mW, with a power density 4.285 …" · pH(an)=7.2, substrate=soil organic matter, steady_stateModellierbar
Power Density87,3mW m⁻²95 %
polarization curve
"In particular, SMFC-GF generated a peak power of 0.43 ± 0.009 mW, corresponding …" · pH(an)=7.2, substrate=soil organic matter, steady_stateModellierbar
Electrode Spacing×24cm95 %
extrahiert
"The SMFCs consisted of an anode buried in the soil and a cathode exposed to air …" · condition_hint=SMFC design parameterModellierbar
Electrode Surface Area×27cm95 %
extrahiert
"The anode (graphite felt, 7 × 7 × 0.4 cm)" · condition_hint=SMFC design parameter, anode length/width, electrode_material=graphite feltAusgeschlossen: kein SI-Wert
Ohmic Resistance409Ω90 %
eis
"At the start of the experiment, RU values for all the electrodes (solid symbols …" · pH(an)=7.2, substrate=soil organic matter, startupModellierbar
Voltage0,241 ± 0,038 (SD)V90 %
voltage monitoring
"The performances of SMFC-CNFFe and SMFC-PtC were very similar, with steady outpu…" · pH(an)=7.2, substrate=soil organic matter, steady_stateModellierbar
Anode Potential-0,355 ± 0,043 (SD)V90 %
potentiometry
"after about 10 days of operation, the anode potential vs Ag/AgCl stabilises at 0…" · pH(an)=7.2, substrate=soil organic matter, steady_stateAusgeschlossen: nicht als modellierbar markiert
Cathode Potential-0,123 ± 0,02 (SD)V90 %
potentiometry
"The cathode potentials (Fig. 2c) of CNFeFe and PtC were similar (0.121 ± 0.031 a…" · pH(an)=7.2, substrate=soil organic matter, steady_stateAusgeschlossen: nicht als modellierbar markiert
Voltage0,244 ± 0,033 (SD)V90 %
voltage monitoring
"The performances of SMFC-CNFFe and SMFC-PtC were very similar, with steady outpu…" · pH(an)=7.2, substrate=soil organic matter, steady_stateModellierbar
Ohmic Resistance295Ω90 %
eis
"At the start of the experiment, RU values for all the electrodes (solid symbols …" · pH(an)=7.2, substrate=soil organic matter, startupModellierbar
Cathode Potential-0,121 ± 0,031 (SD)V90 %
potentiometry
"The cathode potentials (Fig. 2c) of CNFeFe and PtC were similar (0.121 ± 0.031 a…" · pH(an)=7.2, substrate=soil organic matter, steady_stateAusgeschlossen: nicht als modellierbar markiert
Cathode Potential-0,321 ± 0,014 (SD)V90 %
potentiometry
"while the cathode potentials for carboncloth was 0.321 ± 0.014 V, suggesting a l…" · pH(an)=7.2, substrate=soil organic matter, steady_stateAusgeschlossen: nicht als modellierbar markiert
Ohmic Resistance87,3Ω90 %
eis
"Values of different circuit elements are reported in Table 1. At the end of the …" · pH(an)=7.2, substrate=soil organic matter, steady_stateModellierbar
Anode Potential-0,365 ± 0,024 (SD)V90 %
potentiometry
"after about 10 days of operation, the anode potential vs Ag/AgCl stabilises at 0…" · pH(an)=7.2, substrate=soil organic matter, steady_stateAusgeschlossen: nicht als modellierbar markiert
Ohmic Resistance112Ω90 %
eis
"Values of different circuit elements are reported in Table 1." · pH(an)=7.2, substrate=soil organic matter, steady_stateModellierbar
Ohmic Resistance224Ω90 %
eis
"Values of different circuit elements are reported in Table 1." · pH(an)=7.2, substrate=soil organic matter, steady_stateModellierbar
Anode Potential-0,408 ± 0,014 (SD)V90 %
potentiometry
"after about 10 days of operation, the anode potential vs Ag/AgCl stabilises at 0…" · pH(an)=7.2, substrate=soil organic matter, steady_stateAusgeschlossen: nicht als modellierbar markiert
Ohmic Resistance92,2Ω90 %
eis
"Values of different circuit elements are reported in Table 1." · pH(an)=7.2, substrate=soil organic matter, steady_stateModellierbar
25 von 55 angezeigt

Methodik

Welches System und wie es betrieben wurde

Betriebsbedingungen

3 Läufe extrahiert
LaufT°CpHAnolytpHKatholytSubstrat[S]mg/LHRThModusR_extΩV_appVInokulum
v2-34dea0dfaa220134—7.2—soil organic matter——————
v2-973022fb84f8c478—7.2—soil organic matter——startup500——
v2-fb8fb2199dc8ef7d—7.2—soil organic matter——steady_state500——

Extraktionspipeline

Rohextraktionen, Artefakte, Qualitätssignal

Extraktionsqualität

Ehrlichkeitssignal

Bemessen Sie Ihr Vertrauen in die extrahierten Inhalte an diesen Signalen – so hat die Pipeline ihre eigene Ausgabe für diese Publikation bewertet.

KI-Konfidenz

60 %

Vom Modell selbst angegebene Konfidenz

Mittlere Parameterkonfidenz

87 %

Durchschnittliche Konfidenz der oben angezeigten PaperParameter-Zeilen

vor dem Zitieren mit dem Quell-PDF abgleichen · Werte 0–1

03

Diagramm-Explorer

Verändern Sie die Eingaben dieser Publikation und sehen Sie, wie sich das vorhergesagte Ergebnis verschiebt.

04

Modell erkunden

Der Reaktor in 3D, mit Strömung, die sich ein- und ausschalten lässt.

05

KI-Erkenntnisse

Widersprüche, Lücken und Chancen aus dem Vergleich dieser Publikation mit dem Korpus.

06

Ähnliche Publikationen vergleichen

Die nächsten Publikationen nach System, Materialien und Organismen, mit ihren Ergebnissen nebeneinander.

07

Quell-PDF

Die Publikation, wie sie erschienen ist.

3D-Modell wird geladen …

Repräsentatives Modell, generisches MFC

Repräsentatives Modell: MFC – zugeordnet nur anhand des Systemtyps der Publikation, nicht ihres Reaktors oder ihrer Geometrie.

MFC
System
87,3Milliwatt pro Quadratmeter
Bestes Ergebnis · Leistungsdichte
bester von 4
61
Extrahierte Werte
2023
Jahr

Schlagwörter

  • Microbial fuel cell
  • Biofilm
  • Electrochemistry
  • Composition (language)
  • Cathode
  • Carbon fibers

Zitieren

Arpita Nandy, Daniel Farkas, Belén Pepió‐Tárrega et al. (2023). Influence of carbon-based cathodes on biofilm composition and electrochemical performance in soil microbial fuel cells. Environmental Science and Ecotechnology. https://doi.org/10.1016/j.ese.2023.100276

PubMed
37206316

Öffnen Sie das Modell im Labor, um alle Steuerelemente, die Parameterbearbeitung und Vorlagen-Overlays zu nutzen.

Im Labor öffnen